In addition to full maintenance including the exterior in 2020, the ATT has now been cleaned and inspected all parts, and further brushed up. The Georgian 4, which has an attractive elaborate horn configuration and beautiful furniture-like design, has arrived. It has a structure with a built-in crispy horn to create a unique sound with a rich sense of scale. There is a smell in the room (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (ATT cleaning/inspection of various parts) 2020.2.12 maintained ([main body] exterior cleaning/touch repair, resonance/distortion countermeasures, unit detachment [unit] single-sided woofer recorn, both driver disassembly and cleaning, TW one-sided disassembly and cleaning, TW single-side coil manufacturing exchange [network] TW capacitor and resistor replacement. *Some capacitors before replacement are difficult to remove, so they are left inside. Frequency characteristic measurement check (~ 42 kHz). Input/output waveform and balance check, sound output check.)
Accessories: none
Main specifications: 15WK, MT-30 (828HF), T35VHF, X336 (300/3500) approx. W860 x D660 x 1350 mm approx. 90 kg
The price has been reduced. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Fonoico is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment. (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV, proper needle pressure 2.5 g, impedance 24 ohms
The price has been reduced! 2024/6/2 sales price 1,480,000 yen This is a high-end horn system, avant-garde duo. The high efficiency and high speed MID/HI driver is equipped with 2 active woofers. The sound is amazing while keeping the impactful look intact. The beautiful smooth mid-range sound that flows out of a giant trumpet-like horn is particularly wonderful!! Also, although it is a horn system, the smooth connection from bottom to top with no time errors as far as possible is also noteworthy. The exterior is generally good, although there is a slight feeling of use. Serial 09080415 09080416 (Tomoho Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Saran net power cord, jumper cable x 4
Main specifications: crossover frequency 220 Hz/2,000 Hz 104 dB 8 Ω built-in power amplifier output 250W W670 × H1550 × D680 mm weight 65 kg
Both the interior and exterior have been maintained and brushed up! The OLYMPUS S8R representing JBL has arrived. The combination of thick, dry low frequencies, the sound of a driver that seems to blow fire, and the 075, which leaves a gritty feeling of realism, is impressive. Please enjoy the real thrill of vintage audio. The exterior is also beautifully finished (Yonejima Satoshi)
Maintenance information: 2024.5.11 Maintained (network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, exterior cleaning. Woofer maintenance: edge replacement, cone paper coating, passive cone paper coating. Exterior repair/polishing/oil finish, front and rear baffle/hakama repair/painting. Lattice repair/polishing/painting, lining replacement. (Detaching the unit, repairing the diffuser)
Accessories: saran net
Main specifications: 3-way 3-speaker passive radiator system low range unit 38cm cone type (LE15A) mid range unit horn type (375) high range unit (075) passive radiator 38cm cone type (PR15) network LX5/N7000 sound pressure level 95dB allowable input 125W dimensions W1,020 x H670 x D510 mm weight 82 kg
A high-performance speaker that condenses the sound production of the multi-cabinet SYSTEM7 into a single cabinet has an excellent balance of dynamism, wide range, and sense of sound localization. Another advantage is that the sound is not easily affected by the performance of the amplifier. There is a partial tear in the corner of the saran net, and there is a linear paint crack separating the top and bottom on the right side of one (Sasaki Shota)
Maintenance information: 2024.6.3 sweep test is good
Accessories: manual, spike, spike holder, cover
Main specifications: 3-way 4Ω frequency characteristics 29Hz to 22.5kHz 89dB W320 × H1040 × D460 mm 73 kg
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
All units have been overhauled, including the woofer, mid, driver and tweeter, and network! It is an individual that has been fully restored, including the exterior. The original 4343 by All Alnico, the original 4343 of 4343! The crisp low frequencies and punchy high frequencies are unbearable, and popularity continues unabated even now. The dynamic sound typical of JBL has been revived due to maintenance. It is a famous monitor that can best reproduce the sound source of on-microphone recordings regardless of age or genre (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/gray paint. Front and rear baffle repair and painting. Saran net replacement/frame repair. Woofer maintenance: edge replacement, corn paper coating. Midmaintenance: edge replacement, corn paper coating. Driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement. Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, switching SW contact cleaning, high frequency capacitor replacement)
Accessories: none
Main specifications: 4 way 4 speaker bass reflex type 2405/2420/2121/2231A crossover 300Hz/1250Hz/9500Hz 8Ω 93dB W635 x H1,051 x D435 mm 83.9 kg/book
Accupase's best model as an integrated player compatible with SACD. It is a best-selling SACD player that inherits the know-how of advanced models. It is delicate, has a sense of scale, and has a large sound field. While it has the amount of information unique to high-end players, the fine particle feel that feels fine against the skin is truly remarkable. There is a scratch on the top plate. Serial D9Y630 (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: remote control, manual, power cable
Main specifications: SACD compatible CD player, ultra giter free plus PLL circuit, MDS++ conversion system, D/A converter, HS-Link equipment, frequency characteristics 0.5 to 50 kHz, S/N ratio, 114 dB, W477 x H156 x D394 mm, 27 kg
This is a special cleaner for 12-inch LP records that can clean records with 200W high-output ultrasonic waves. It can remove micro, stubborn dirt and dust that is invisible to the naked eye and adheres deeply to the sound groove. This effect also has an overwhelming impact on sound quality. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: Jogo power cable (general purpose)
Main specifications: built-in tank capacity 2.5 liters (use of commercially available purified water is recommended). Approximately 50 to 100 sheets can be washed with one water supply W435 ✕ H300 x D181 mm weight 14.4 kg
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
The price has been reduced! 2024/5/31 sales price 598,000 yen Manufacturer maintained! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
The price has been reduced. 2024/6/1 sales price 598,000 yen rare items have arrived! Swiss-made electro Voices It features a thick sound unique to wood horns, and tight low frequencies. The goodness of construction shines through. It is equipped with a laminated wood horn, and I want to raise the volume and make a sound. Please experience the natural tone of an acoustic guitar and the subdued sound of the wood bass. The exterior has scratches on the corner, paint chips on the back, and other overall line damage (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: Swiss 2 way 2 speakers, efficiency 93 dB, impedance 10 ohms, external dimensions W378 x H590 x D325 mm, weight: 28.5 kg
The price has been reduced. 2024/6/2 sales price 498,000 yen straight pipes, only lightweight weights are included, and the armrest is an external item, so it's cheap. Maintained! EXCLUSIVE's popular analog player. The inside of the thick cab is structured so that the motor part and tone arm part float. When you actually play it, the effect is tremendous, and it brings out the sound of the record to the extreme. The exterior is broken in the corner of the dust cover, chipped glass, and finger tips are substitutes, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintenance completed (START, disassembly and cleaning in other buttons, servo circuit electrolytic capacitor replacement, rotation lock position adjustment, arm damping grease cleaning replacement, turntable height adjustment, armrest replacement (structure is different). (Arm operation, voice check)
Accessories: straight pipe, lightweight weight, instruction manual (copy)
Main specifications: linear torque DC Hall motor direct drive dynamic balance type arm needle pressure adjustment range 0 to 3 g W600 x H267 x D415 mm 45 kg
The price has been reduced! 2024/5/19 sales price 498,000 yen Maintenance has been completed, such as capacitor replacement/replacement of deteriorated parts! It is a famous machine with a velvet transformer, and you can enjoy rich sound with stable operation. The fresh, glossy tone in the mid to high range has a different appeal from the MC275. The exterior has a feeling of use over time, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.19 Maintained (volume curing improvement treatment for TWIN, 2W oil capacitor replaced with 0.01μF, 3W oil capacitor replaced with 0.5 μF, missing thermistor, replacement, 250μF, domestic CE replacement, block capacitor 100/30 μF defective replacement, oil capacitor 0.22 μF defective replacement electrolytic capacitor 20μF, etc. Deterioration replacement resistor 2W deterioration replacement Vacuum tube socket and RCA jack caulking repairs ※ Other operation checks have been performed (measured at 41 to 58 W with rated output AC 100 to 117 V, SP: 8 Ω) ※ The power transformer groans a little, but there is no problem with performance)
Accessories: A copy of the English instruction manual
Main specifications: 40W+40W 6L6GCPP vacuum tube 6L6GC × 4 12AX7 × 3 12AU7x2 12BH7 × 2 frequency characteristics 16 to 40,000 Hz dimensions W400 × D265 × H195 mm weight 25 kg
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
※Inexpensive because there are noticeable scratches on the front. Player system with SME3010R mounted on Luxman PD-171AL! Popular MC cartridge SPUs can also be attached. The combination of the latest high-end machines and high-end arms makes it a player that excels in the amount of information with Japanese precision and a reliable skeleton. It is one that brings out the characteristics of cartridges to the greatest extent with precise sound (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: power cable, instruction manual
Main specifications: [PD-171AL] belt drive AC synchronous motor quartz lock oscillator amplifier turntable · machined aluminum surface finish · diamond cut weight 5.0 kg rotation speed 33 · 45 rpm W492 ✕ H140 ✕ D407 mm weight 23.8 kg
Comes with AKTIV CROSSOVER! (4 separate stereo power amplifiers are required) Multi-purpose dedicated system speakers. As an isobaric low frequency system, the same unit as the woofer visible on the front is stored inside the enclosure. Using multiple amplifiers, AKTIV CROSSOVER allows optimal music signals to be played for each unit, creating high quality sound typical of LINN in all bands. The exterior is dull and has a feeling of use, and the saran net is loose. Serial 000295 000296 (Hiroki Aso)
Maintenance information: 2024.6.3 sound output confirmed, AKTIV CROSSOVER maintained (power supply unit replacement, main board, electrolytic capacitor replacement, output, audio check, check frequency characteristics, etc.)
Accessories: AKTIV CROSSOVER
Main specifications: 3 way, 4 speakers, isobaric system, crossover frequency 90 Hz, 3 kHz, external dimensions W350 x H1050 x D410 mm, weight 55 kg (actual measurement)
The price has been reduced! 2024/6/2 sales price 348,000 yen model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. As for the exterior, there is a feeling of use such as line damage or dullness on the top plate. Serial 0850704021 (Tomonori Asaine)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual copy remote control power cord spike
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
Active speakers in the “Formation Suite” series of wireless audio compatible with high-resolution transmission. One unit is powered by a 125W digital amplifier. It features a high-quality sound that casually expresses a sense of dynamism when the sound starts up. It is a system that is likely to become a new listening style in the future, as it can also support network playback using Roon without using a separate amplifier (Kojima Yosuke)
Main specifications: 2-way active speaker output 125W x 2 Wi-Fi, AirPlay 2, Spotify Connect, Roon Ready compatible Bluetooth version: 4.1 Bluetooth compatible codecs: SBC, AAC, aptX HD W197 x H395 x D305 mm 10.6 kg/unit
The price has been drastically reduced. 2024/5/30 sales price 398,000 yen ※It is cheap because there are many scratches. Maintained by Taiyo International. This time it comes with a special battery BPS-2. Geoff Roland's peak stereo power amplifier. Genuine Oba Shoji product. A thorough non-resonance design using the company's traditional hard aluminum material. The high range with a sense of transparency and sharpness, the mid and low range with a sense of speed and driving power, and a vivid and satisfying sound are attractive. The exterior has scratches, line scratches, and dirt marks (Ryo Mizusaki)
Maintenance information: 2024.5.2 manufacturer maintained (BPS-2: internal cleaning, battery replacement, inspection of various parts, operation inspection. (Model2: Inspection of each part, characteristic inspection, running test)
Accessories: power cord, connection cable
Main specifications: 75W+75W (8Ω) with GAIN26/32dB changeover switch input impedance with HIGH/LOW changeover switch W445 × H133 × D362mm 21kg BPS-2: W445 × H133 × D362 mm weight 22 kg
The price has been reduced. 2024/6/2 sales price 278,000 yen Maintained! This α907 limited model is limited to 2000 units. A premain amplifier that stands out for its high SNR and good sound unique to MOS-FET. The fine particle feel in the mid to high range is one of the best in the history of SANSUI premain amplifiers. Coupled with the thick, energetic mid-low range, it is a famous model that has not faded its appeal even now. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (power amplifier direct, etc.) switch disassembly polishing grease application (loudness, subsonic, muting, processor, reckout, MM/MC switch, input selector, source direct, tape), output relay replacement, power amplifier section, power supply transistor, adjustment volume replacement, solder repair, volume, switch cleaning, DC, bias adjustment , running test)
Accessories: copy of instruction manual
Main specifications: 80W+80W (8Ω) MM/MC compatible MOS-FET use W466 × H166 × D453 mm 34 kg
Comes with a wood cabinet. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. As for the exterior, small scratches are scattered on the cabinet (Kanai Hidetsugu)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: instruction manual (copy)
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Maintained! The strength of the extrusion of the entire range and the clear sound are truly sounds unique to the heyday of JBL. The mid-high range with a unique sense of spaciousness and strong linearity makes hard bop and trumpet sounds pleasant. The sense of volume in the mid to low range is also attractive not found in modern speakers. The exterior has been beautifully finished due to maintenance (Mizusaki Ryo)
Maintenance information: 2024.5.11 maintained (exterior repair/polishing/oil finish, front and rear baffle/horn repair/painting, saran net replacement/frame repair, woofer edge replacement, driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning/screw replacement, unit detachment)
Accessories: saran net
Main specifications: 2-way bass reflex, 30cm woofer, frequency band, 40Hz to 16kHz, impedance, 8Ω, sound pressure level, 91 dB, dimensions W406 x H635 x D311 mm, weight 26 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. disassembly contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement. Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Both the interior and exterior have been maintained! Grey version of 4312MK2. A standard monitor that combines responsive, sharp monitor sound with delicate expressive power. You can enjoy the strong, punchy sounds of jazz, rock, soul, etc. The exterior is also completely painted with specially blended JBL gray paint, and the finish is beautiful. Serial J372-010877 J373-011514 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 maintained (exterior cleaning and touch-up saran frame painting and net replacement tweeter maintenance driver maintenance (magnetic circuit rust removal, gap cleaning, center adjustment, internal urethane replacement, grill and screw coating, rubber ring replacement) mid-maintenance (corn paper repair and coating) ATT cleaning unit detached)
Accessories: saran net
Main specifications: Onboard unit 2213H+104H-3+052Ti 3-way speaker replacement titanium dome tweeter bass reflex structure 93dB 6Ω W362 x H597 x D298 mm 20 kg
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound is captivating. The exterior has been beautifully finished due to maintenance. Serial 32547 32298 (Murakoshi Yoichi)
Maintenance information: 2024.5.16 maintenance (exterior repair/cleaning, saran net cleaning, repasting, ATT cleaning)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
The price has been reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed due to fixed switch. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
Maintained! A driver unit suitable for sound reproduction for large halls and theaters, modeled after the standard 2-inch 375. High frequency characteristics have been enhanced while retaining a vintage feel. The cymbals play a sound that makes you think of jazz. The exterior has rust, paint peeling, etc. Serial 32769 32799 (Tomonori Asaine)
Maintenance information: 2024.6.3 maintained (diaphragm repair and installation adjustment pad dampener replacement, 18 mounting screws, replacement, distribution terminal, contact part cleaning, terminal cleaning, 8 insulating bushings, replacement, diaphragm cleaning)
Accessories: none
Main specifications: frequency characteristics, 500 to 18 kHz, crossover, 500 Hz, 16 ohms, diameter: 175 mm, height: 145 mm, approx. 11.8 kg/bottle
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
Maintained by the manufacturer! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input 160 W, W650 x H204 x D314 mm, weight 14 kg
The price has been reduced! 2024/6/2 sales price 128,000 yen Woofer edge softening treatment! Comes with a genuine stand DK-1000ZX (list price 50,000 yen). Standard diamond tone model. The characteristics of the Boron scoker, which is strong and has a good sound, shine through. The tight low range with supple stretch is a sound unique to Diatone. You can enjoy excellent sound regardless of genre. The exterior has small scratches and dullness. ※Saran net is out of stock. Serial 14308/14315 (Fujisawa Yukishi)
Maintenance Information: 2024.6.2 woofer edge softened
Accessories: Genuine stand DK-1000ZX ※Saran net missing
Main specifications: [DS-1000ZX] 3 way 3 speaker sealed type 6.3 ohm output sound pressure level 90 dB W360 × H690 × D341 mm 29 kg [DK-1000ZX] W360 × H195 × D300 mm 6.2 kg
Maintained! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
The price has been reduced. 2024/6/1 sales price 118,000 yen Maintained! This is QUAD's first transistor preamp. The dark tone, with a sweet sense of humidity, is the British sound itself. The combination with the company's 303 power amplifier is also an attractive system. You can see the exterior, discoloration of the letters, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 maintenance completed (poor contact with connectors such as internal PHONO board/LINE board, etc. → pin caulking, contact polishing, other internal board coupling C replacement, operation check)
Accessories: copy of instruction manual, power cord, connection cord
Main specifications: Phono 1 system, 3 line systems, W260 x H92 x D165 mm, 3 kg
The price has been reduced! 2024/6/2 sales price 118,000 yen ROYAL AUDIO TSB-9 with dedicated stand! A popular Pioneer ribbon tweeter. A golden combination of beryllium diaphragms and alnico magnets. In addition to the ultra-high frequency sound quality correction, the expansion of spatial expression, and the wide sound field can be clearly experienced with classical sources. The exterior is dull, and there are scratches on the front mesh and pedestal (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: dedicated stand
Main specifications: input impedance 8 ohms, playback frequency band, 5,000 Hz to 120,000 Hz, maximum input, 100 W, output sound pressure level, 97.5 dB, crossover frequency of 5,000 Hz or more, W134 x H89 x D179 mm, 2.6 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
The price has been reduced! 2024/6/1 sales price 118,000 yen A headphone amplifier with a built-in DAC equipped with a renewed D/A circuit and 1 ESS Technology “ES9038Q2M” on the left and right. By using the DAC in mono mode, a high S/N value is obtained, and native playback of DSD 22.5 MHz and PCM 768 kHz/32 bit is realized. The exterior is good with no noticeable scratches. Serial 20Z0002 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: Remote control power cord (general purpose)
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.1 kg
The price has been drastically reduced. 2024/1/15 sales price 118,000 yen pair tube 45 special compatible ball straight heat triode fishing rod type filament made in America measurement value 90/86 (rejected value 55) with white box*Pairs are determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Hi-Fi is in stock for the first time! It was brand new, unopened, but I opened it for testing. These wireless headphones were produced for a limited time to commemorate the 60th anniversary of the movie 007. Homages to James Bond are included everywhere, and it is a must-see model for fans that combines the symbols of B&W and 007 (Mizusaki Ryo)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: 40mm dynamic full range/driver x 2, battery life 30 hours, charging method, USB-C terminal, W189 x H233 x D63 mm, weight: 320 g
The price has been drastically reduced. 2024/6/1 sales price 118,000 yen popular 15 inch Alnico magnet HIFI woofer! The high efficiency and punchy, bouncy low frequencies are attractive. It is compatible with JBL drivers, and it is easy to create a sense of scale even in bass reflex type enclosures, etc. Mounting in an airtight or bass reflex enclosure with an internal volume of 150L to 250L is recommended. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Key Specifications: Alnico Magnet 38cm Impedance 8Ω Crossover Frequency 800Hz Sound Pressure 96.8dB Front Mount 357mm Rear Mount 349mm 11kg
The price has been reduced! 2024/5/25 sales price 99,800 yen Maintained! Professional A version (8 ohm specification) of the LE15. This woofer has good response and allows you to enjoy a dry, tense sound. There is only one unit developed for monitors, and it is a unit that can handle large inputs. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (edge replacement, operation check)
Accessories: No accessories
Main specifications: 38cm cone woofer Alnico 8Ω (measured DC value 7.0Ω/6.9Ω) 150W crossover 800Hz baffle opening diameter 355mm screw pitch (diagonal) 370 mm
Direct drive record player equipped with the Orthophone 2M RED as standard. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (sometimes not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
The price has been reduced. 2024/5/25 sales price 99,800 yen with 2447 exclusive horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
The disposal price has been reduced. Member prices are not applicable. 2024/5/9 sales price 128,000 yen One side tweeter has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg