This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
※It is inexpensive because it has a lot of feeling of use. A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior has a feeling of use such as fading due to aging (Kanai Hidetsugu)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. There is a feeling of use, such as line scratches scattered on the top plate (Kanai Hidetsugu)
Accessories: none
Main specifications: main body W400 x H220 x D350 mm 5.8 kg (actual measurement) top plate W360 x D320 mm (actual measurement)
Comes with a 2447 special horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
The disposal price has been reduced. Member discounts are not applicable. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
Maintained! Although it is a transistor amplifier, it has a warm sound like a vacuum tube with a faint scent. While it is glossy, it is also strong, so you can use it with any speaker. Exterior, dullness, scuff marks, rust, corrosion, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintained (main amplifier circuit fault repair fuse replacement. Switch and volume affinity correction)
Accessories: none
Main specifications: 80W+80W (8Ω) W466 x H181 x D378 mm 15 kg
*Remote control is out of stock. Maintained! Onkyo's unique supercurrent amplifier configuration is used for the power section, and the smooth sound is impressive with a circuit that combines a MOS FET and a bipolar transistor. The sense of power in the low frequencies and the extension in the high frequencies play a slightly different sound from the others. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintenance completed (switch disassembly, contact polishing, contact cleaner application. Soldering correction for each circuit board)
Accessories: instruction manual
Main specifications: 80W+80W (8Ω) W455 × H170 × D430 mm 17 kg
8000 Hz network for high range It can also be used in combination with JBL 077 or when combining a full range with a tweeter. Exterior, paint deterioration and peeling, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (terminal terminal deterioration replacement, terminal cleaning (coil replacement) attenuator VR replacement, crossover 8000 Hz check OK)
Accessories: none
Key Specifications: 2 Way Variable Level Control Crossover Frequency 8kHz 8Ω Weight 0.9 kg
The price has been reduced. 2024/5/25 sales price 29,800 yen. ※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback)
Accessories: instruction manual, gasket
Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
The price has been drastically reduced! 2024/5/25 sales price 148,000 yen This speaker has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose product) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
Tannoy rectangular yoke type enclosure by Shinkosha, a popular domestic box manufacturer. It is attractive because it is made to sound good. A 30cm unit adapter (detachable) is attached to the baffle surface, and casters are attached to the bottom (Murakoshi Yoichi)
Accessories: none
Main specifications: W597 x H108 x D37 mm weight 30 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/24 sales price 128,000 yen A digital amplifier equipped with a Tripath class T PWM amplifier IC. It beautifully expresses the sense of energy and description. Gain can also be switched on the back, and it is compatible with a wide range of input sources. On the exterior, there are oxidation and scratches on the manufacturer logo. Serial 100210015 (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: instruction manual, power cable, spike
Main specifications: output 150W+150W (8Ω) 240W+240W (4Ω) W420 x H98 x D395 mm weight 13 kg
It's a small digital interface that fits in the palm of your hand. The input uses a Type-C USB interface. The output is I2S/optical/coaxial. The sampling rate is PCM32 bit/768 kHz compatible, DSD native, DOP64 compatible (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: original box, connection cable
Main specifications: W80 x H13 x D60 mm dead weight 120 g
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
High position small speaker stand High density compression boards are used, and rigidity can be expected. The round curved silhouette on the front side is also a point. There are abrasions in places (Kojima Yosuke)
Accessories: none
Main specifications: height 500 mm top plate W240 x D270 (W200 x D250) mm bottom plate W280 x D330 mm weight 6.0 kg/book
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/24 sales price 29,800 yen ※1 wooden horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (stop 3 points). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Takahashi Nobuyuki)
Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 manufacturer maintained (arm disassembly repair, arm position detection CDS replacement, lead-in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
Pair tube double triode tube, made in America, JAN measurement value 80/76 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube double triode tube, made in America, JAN measurement value 74/72 (rejected value 32) *Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The price has been reduced. 2024/5/23 sales price 22,800 yen. Set of 4 large insulators The weight capacity is 60 kg, and the height can be adjusted by 7 mm. Please use it under the foot of a rotating device such as a record player. There is a feeling of use such as dirt (Takasaki Atsushi)
Accessories: none
Main specifications: load resistance 60 kg diameter 10 x height 50 mm weight 425 g per piece
※It is inexpensive because there are many stains. A classic shell made from machined aluminum blocks. I like the sturdy construction and simple design (Murakoshi Yoichi)
Maintenance information: 2024.5.21 continuity confirmed
Accessories: none
Main specifications: machined aluminum block body weight 13g
Pair tube direct heat triode tube American-made smoke measurement value 68/68 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube American-made smoke measurement value 72/70 (rejection value 38) with white box (lid claws are missing) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
The price has been drastically reduced. 2024/5/24 sales price 248,000 yen Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Pair tube direct heat triode tube made in Russia measured value 72/72 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
1 bottle sold in England Xf1 6CA7 compatible ball tea base double ring getter date code: Xf1 B1I4 measured value 46 (rejected value 30) with white box (written on the box), there is getter burn, and it has decreased slightly (Kojima Yosuke)
Accessories: white box
Pair tube direct heat triode tube made in Russia measured value 72/70 (rejected value 38) with original box (inner cushioning material has deteriorated) *Pairs are determined based on gM values measured with the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
The price has been reduced! 2024/5/23 sales price 39800 yen Chinese SMSL D/A converter. ESS's ES9068AS is used as the DAC. Although inexpensive, it supports a wide range of inputs such as AES/EBU and I2S. The exterior is dull. Serial 4600010200207 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: input USB, optical, coaxial, I2S, 1 AES/EBU system each W210 x H40 x D170 mm 1.2 kg
HDMI cable 1.0 m transmission speed 10.2 Gbps to 21 Gbps (varies depending on cable length) The shorter the cable, the faster the transmission speed. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping weight 8.2 g
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (disassemble the push switch and remote wire switch, polish the contacts, and apply contact cleaner. Volume contact correction. Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
※Whether it is a genuine product is unknown. Set of 8 1 pair of JBL speaker mount parts There is a lot of feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
A backload type enclosure that can mount an unspecified JBL38cm woofer. The construction is solid. If you've been looking for one, take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: saran net
Main specifications: W603 x H1100 x D508 mm 40 kg (actual measurement)
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg