This is self-made equipment for unknown uses. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W235 x H75 x D305 mm weight 2.0 kg
This is self-made equipment for unknown uses. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W235 x H65 x D300 mm weight 2.3 kg
This is self-made equipment for unknown uses. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W165 x H75 x D250 mm weight 2.0 kg
This is self-made equipment for unknown uses. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W159 x H62 x D225 mm weight 1.2 kg
The price has been reduced (2016/9/2 sales price 5,000 yen) This is a TRIO tuner. It also makes a sound when the power is turned on, but the sensitivity is poor and noise is added. There are times when the FM switch does not make a sound due to poor contact. Please use it as a part remover. Member prices are not applicable for junk items (Tsukazaki Kyohei)
Maintenance information: 2016.8.28 operation check (sounds are made, sensitivity is not good, noise is on, sometimes there is no sound due to poor contact with the FM switch)
Main specifications: external dimensions W435 x H153 x D300 (mm) weight 8.1 kg
The disposal price has been reduced! 2024.6.4 Sales price 4,000 yen The cantilever broke off in the middle and is gone, so I can't make a sound. There are corrosion stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Accessories: none
Main specifications: dead weight 7g
The check at the time of arrival shows flapping on one side of the woofer, midrange distortion on both sides, and gaps in the attenuator. The exterior has chipped corners, uneven paint, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2020.9.21 Operation confirmed Unchecked
Accessories: saran net
Main specifications: W495 x H965 x D430 mm 37.7 kg (actual measurement)
The disposal price has been reduced! 2024/6/2 Marantz CD player with sales price 30,000 yen. It's junk because the LCD display is poor and there is an abnormal noise during SACD playback. Please use it as a part remover. The exterior has stains, yellowing, small scratches, etc., and smells like tobacco. *Member prices are not applicable for junk items. Serial 200005400297 (Tomonori Asaine)
Maintenance information: 2024.6.2 Unmaintained ※Since it is a junk item, it will be delivered as is without warranty.
Accessories: remote control instruction manual power cable
Main specifications: SACD/CD player, 1 analog output system (RCA), 2 digital output systems (coaxial x 1, optical x 1), digital filter, switch to 3 modes, W440 x H123 x D419 mm, 13.5 kg
There is a problem with the horizontal movement of the arm, and there is more noise than the speaker during operation. There are problems such as missing changer spindles, etc., and they are sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance Information: 2024.6.4 Unrepairable. Junk items will be handed over as is.
Accessories: Instruction Book copy (German only)
Main specifications: W415 x H157 x D356 mm approx. 9 kg (actual measurement)
There was no mid-range sound on one side during the check, so I will sell it as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.28 Operation confirmed (the left side of the MID on one side does not come out. (As for junk items, they will be handed over as is.)
Accessories: saran net
Main specifications: W450 x H640 x D290 mm 26.4 kg
Self-made power amplifier. The main parts used are NICHION (LUX) 5557, OZ-15-6.6K, O-36-8K, etc. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W360 x H150 x D240 mm 14.2 kg (actual measurement)
Self-made power amplifier. The main parts used are power supplies TANGO MS-105, MC-10-200D, FW-20-14S, etc. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W402 x H170 x D210 mm 12 kg (actual measurement)
The stylus chip is left, but it looks like there was distortion in the low range during the check at the time of arrival. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Accessories: none
Key Specifications: Weight 5g
The cantilever broke off halfway through, so I can't make a sound. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Main specifications: dead weight 6g
The stylus chip is left, but the sound output has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Accessories: needle cover
Main specifications: dead weight 4.2 g
Harmonia power strip. I checked that the electricity was applied, but there is no PSE mark, so please use it as a part remover. *Member prices are not applicable for junk items. (FUJISAWA KOSHI)
Maintenance information: ※It will be delivered as is without warranty.
Accessories: No accessories
Main specifications: W300 x 165 x D120 mm 2.05 kg (actual measurement)
Camelot power strip. I checked that the electricity was applied, but there is no PSE mark, so please use it as a part remover. *Member prices are not applicable for junk items. (FUJISAWA KOSHI)
Maintenance information: ※It will be delivered as is without warranty.
Accessories: No accessories
Main specifications: W123 x H55 x D 240 mm 1 kg
The motor makes a noise when the power is turned on, but the tray does not open. The remote control responded to the main unit. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.4 Operation confirmation The motor makes a noise when the power is turned on, but the tray does not open. The remote control responded to the main unit.
Accessories: remote control, manual
Main specifications: W470 x H145 x D380 mm 13.6 kg
There is no problem with the sweep or music signal, but the ATT on one side is stuck and the other ATT is junk. Sansui's 3-way 5 speaker. Please use it as a part remover. There is an appearance, dullness, scratches, and a feeling of use*As a junk item, membership prices are not applicable, there is no guarantee, and it is sold as is (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 operation confirmation (sweep, no music signal problem, ATT stuck on one side, other ATT gaps)
Accessories: none
Main specifications: 3 way 5 speakers, phase reversal type, bookshelf type, 8 ohms, maximum input, 50 W, frequency characteristics, 35 to 20,000 Hz, crossover, 600/5,000 Hz, W381 x H650 x D323 mm, 21 kg
You can make a sound, but it won't respond unless you press the PLAY/PAUSE button too hard. Remote control is missing. The exterior is stained and stained, the inside of the tray is sticky, and the OPEN/CLOSE printing has disappeared. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.4 Operation confirmation sound can be made, but it will not respond unless the PLAY/PAUSE button is pressed strongly.
Accessories: None ※ remote control missing
Main specifications: W435 x H115 x D375 mm 9.3 kg
When the MD was inserted during the check at the time of arrival, an error message appeared, and it seemed that it was impossible to eject while a “jee~” sound was heard. After that, the power remains on and the LCD does not appear. Remote control is missing. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.6.4 Operation Confirmation Unchecked
Accessories: None ※ remote control missing
Main specifications: W430 x H95 x D285 mm 3.1 kg
Yamaha cassette decks. There is constant internal noise, and the drive system does not work. Please use it as a parts remover. *Member prices are not applicable for junk items (Mizushima Itsuro)
Maintenance information: 2024.6.2 Unmaintained ※Since it is a junk item, it will be handed over as is without warranty
Accessories: none
Main specifications: W435 x H114 x D303 mm 5.7 kg
Yamaha cassette decks. Internal noise is constantly being made, and PLAY driving does not work. Please use it as a parts remover. *Member prices are not applicable for junk items (Mizushima Itsuro)
Maintenance information: 2024.6.2 Unmaintained ※Since it is a junk item, it will be handed over as is without warranty
Accessories: none
Main specifications: W435 x H114 x D303 mm 5.7 kg
Self-made power amplifier using 16 Matsushita 50HB26. The main parts used are Panasonic 50HB26 x 16, 12AT7 x 2, 6FQ7 x 2, unknown transformers, etc. Operation has not been confirmed and will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W306 x H198 x D451 mm 17.4 kg
The fuse blows when the power is turned on, so it's junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance Information: The fuse blows. Junk items will be handed over as is.
Accessories: none
Main specifications: W468 x H206 x D385 mm 27.3 kg
The sound output of each unit has been confirmed, but the MID on one side appears to be distorted during the inspection at the time of arrival. The sound is interrupted depending on the position due to stiffness and poor contact with the attenuator. The exterior is stained, stained, and there are tears in the saran net. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.2 Operation confirmation The sound output of each unit has been confirmed, but it seems that the MID on one side is distorted during the inspection at the time of delivery.
Accessories: saran net
Main specifications: W380 x H670 x D254 mm 22.7 kg
I was able to make a sound, but it looks like the tray didn't open when it was checked at the time of arrival. The remote control responded to the main unit. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.2 Operation confirmation sound was made, but it seems that the tray did not open during the check at the time of arrival.
Accessories: remote control, RCA cable, power cord
Main specifications: W435 x H111 x D405 mm 8.9 kg
The power is turned on, but operation has not been checked. According to the information at the time of arrival, it looks like a power supply for a 14V field unit, but the details are unknown. The exterior is dirty, scratched, and the condenser is stained. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.6.2 Operation confirmation The power is on, but operation has not been checked.
Main specifications: W170 x H140 x H352 mm 7.75 kg (actual measurement)
A self-made pre-main that imitates JBL's masterpiece amplifier, the SA600. There was noise during the check. Since it is self-made, the details have not been checked, and it is sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.29 Operation confirmation (noise appears. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W360 x H128 x D270 mm 3.8 kg
Disposal price reduction. 2024/5/30 sales price 100,000 yen Once the power is turned on, it will be fast forwarded. We sell junk because the manufacturer is unable to repair it. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2022.9.3 manufacturer inspection (parts not available. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W520 x H267 x D130 mm approx. 13 kg
Disposal price reduction. 2024/5/30 sales price 150,000 yen Westinghouse2A3, mono power amplifier using a Lux transformer. The main parts used are Westinghouse 2A3 x 4, Matsushita 12AU7 x 4, LUX power tiger 4A48 x 2, choke 6BC10 x 2, out OY36-5 x 2, chalk 4620 x 2, etc. Since it is self-made, the details are unknown, and the operation has not been confirmed, so it will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W200 x H165 x D330 weight 12.2 kg
A self-made power amplifier that imitates JBL amplifiers of yesteryear. There was a sound when checking. Details unknown, I will sell it as junk because I made it myself. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.27 sound confirmation (it will be handed over as is for junk items.)
Accessories: none
Main specifications: W380 × H141 × D290 mm 8 kg
The disposal price has been reduced! 2024/5/29 sales price 5,000 yen I was able to confirm the sound output when checking, but since clearance with the board cannot be obtained and it is on the verge of rubbing, I will sell it as junk. The needle cover is missing, the body is dull, and there is a feeling of use. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.26 Operation confirmed (the body seems to be scratched because clearance cannot be obtained. (As for junk items, they will be handed over as is.)
Accessories: none
Disposal price reduction. 2019/11/2 sales price 700,000 yen It seems that the power was initially turned on during the check at the time of arrival, but then it stopped turning on. The back panel is missing. On the exterior, the veneer is peeling off, and there are stains, scratches, and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2019.11.2 Operation Confirmation Unchecked
Accessories: 3 iron needles ※ back plate missing
Main specifications: W1040 x H940 x D650 mm (actual measurement) It seems to be 130 kg or more.
Disposal price reduction. 2023/3/10 sales price 50,000 yen 1 bottle only. Front load bass reflex enclosure used in A7-X etc. in the latter half of the 70s. Made of hard particle board, it has a sense of weight, and the box also makes a modest noise. The exterior has screw holes and dirt marks on the top plate. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: screw pitch 383 mm W757 x H1062 x D610 mm 54.5 kg
Disposal prices have been reduced! 2023/6/22 sales price 5,000 yen ※ It's junk because the distortion of the individual on one side is large. A PA speaker for Yamaha vocals. Please use it to remove parts. You can see a feeling of use such as appearance, rust, dullness, threads, etc. ※Member prices are not applicable for junk items (Kobayashi Hitoshi)
Maintenance Information: 2023.6.19 Operation check (individual distortion on one side. (As for junk items, they will be delivered as is.)
Accessories: none
Main specifications: W335 x H745 x D240 mm 14.8 kg