armless The power does not turn on. The exterior is stained and stained, and there is a crack near the hinge on one side of the dust cover. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.5.31 Operation confirmation The power does not turn on.
Accessories: dust cover (broken)
Main specifications: Direct drive system, quartz control, 30cm, die-cast aluminum turntable, 33/45 rpm, 2 speed switching, W664 x H160 x D392 mm, 22 kg
One caster is missing with a short joint pole, so I will sell it as junk. Screw piles are normal. Suri glass shelf, silver pole Since the height and inner dimensions of each stage are 326 mm, it is also possible to install a large amplifier and a large screen TV display. The struts are all 19 mm in diameter and 326 mm in diameter. The exterior has stains and stains. ※No spikes. (TAKIMOTO Yutaka)
Accessories: Comes with casters (1 joint pole is missing) *No spikes.
Main specifications: W1085 x H800 x D500 mm 42.2 kg (actual measurement). Glass shelves with a thickness of 10 mm can withstand up to 70 kg of load per sheet, but please use it so that the weight is not concentrated on only one point.
The power is on, but the details haven't been checked, so it's junk. National digital display audio timer. Please use it as a part remover. There is a feeling of use due to appearance, dullness, scratches, scuffs, rust, etc. ※As a junk item, membership prices are not applicable and there is no guarantee, and it is sold as is (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmation (power on, details unchecked)
Accessories: none
Main specifications: W297 x H65 x D120 mm 1.6 kg
There is no amount of cleaner liquid left, and the sponge deteriorates over time and becomes dented when touched, so it's junk. PERMOSTAT record cleaner. Please use it as a part remover. There is an appearance, dullness, and feeling of use*As a junk item, membership prices are not applicable, there is no guarantee, and it is sold as is (Kobayashi Hitoshi)
Accessories: original box
The power is turned on, but it cannot be read. The exterior is relatively clean, but there are stains and stains. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.5.30 Operation confirmation The power is on, but it cannot be read.
Accessories: manual
Main specifications: W430 × H168 × D380 mm 14.5 kg
Tube line control amplifier using IDEAL chassis FM-4000. There was a sound when checking. There is a gap in each of the snacks. The main parts are TANGO ST-30S, National 12AU7 x 3, etc. Since they are self-made, they are sold as junk items. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.31 Operation confirmed (A sound was made. There is a gap in the knob. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W400 × H91 × D360 mm 5.4 kg
The disposal price has been reduced! 2024.5.31 sales price 25,000 yen I was able to record and play back at the time of check. Each knob has glitches, and there is slight distortion in the playback sound, so we sell it as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.19 Operation confirmation (there is a gap on each knob. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: 3 head dual capstand Ruby B, C, HX-PRO DBX W430 x H109.5 x D285 mm 5 kg
There is no problem with the sound output on one side due to the inspection at the time of arrival, but the terminal on one side has fallen out, so it seems that it has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.30 Operation Confirmation Unchecked
Accessories: none
Main specifications: horn type tweeter unit 8 ohms 3 kHz to 20 kHz diameter 70 mm x height 107 mm 1.3 kg
A self-made power amplifier that imitates JBL amplifiers of yesteryear. There was a sound when checking. Details unknown, I will sell it as junk because I made it myself. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.27 sound confirmation (it will be handed over as is for junk items.)
Accessories: none
Main specifications: W321×H131×D274mm 5.7 kg
There was a sound when checking. The phono part also made sound, but the gain is low. Details are unknown because they are self-made, and they will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.26 Operation confirmed (A sound was made. Phono gain is low. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W436 x H109 x D330 mm 4.6 kg
When the power-on operation button is pressed, the motor makes a noise, but the tape does not spin. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.5.30 Operation confirmation When the power is turned on, the motor makes a noise when the operation button is pressed, but the tape does not rotate.
Accessories: manual
Main specifications: W450 x H173 x D341 mm 10.0 kg
Disposal price reduction. 2024/5/30 sales price 150,000 yen Westinghouse2A3, mono power amplifier using a Lux transformer. The main parts used are Westinghouse 2A3 x 4, Matsushita 12AU7 x 4, LUX power tiger 4A48 x 2, choke 6BC10 x 2, out OY36-5 x 2, chalk 4620 x 2, etc. Since it is self-made, the details are unknown, and the operation has not been confirmed, so it will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W200 x H165 x D330 weight 12.2 kg
Disposal price reduction. 2024/5/30 sales price 100,000 yen Once the power is turned on, it will be fast forwarded. We sell junk because the manufacturer is unable to repair it. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2022.9.3 manufacturer inspection (parts not available. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W520 x H267 x D130 mm approx. 13 kg
Self-made OTL power amplifier using 16 Matsushita 25E5. The main parts used are Panasonic 25E5 x 16, 12BH7 x 2, 6267 x 2, unknown transformers, etc. Operation has not been confirmed and will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W305 x H190 x D405 weight 13.. 8 kg
Self-made power amplifier using 16 Matsushita 50HB26. The main parts used are Panasonic 50HB26 x 16, 12AT7 x 2, 6FQ7 x 2, unknown transformers, etc. Operation has not been confirmed and will be sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W306 x H198 x D451 mm 17.4 kg
A power amplifier using 8 6C33C. Since it is self-made, detailed specifications are unknown, and it is sold as junk. The vacuum tubes used are SOVTEK 6C33C-B x 8, PHILIPS ECG 6922 x 4. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: Operation unconfirmed (this is a junk item and will be handed over as is.)
Accessories: none
Main specifications: W432 x H179 x D370 mm 8.4 kg
A self-made pre-main that imitates JBL's masterpiece amplifier, the SA600. There was noise during the check. Since it is self-made, the details have not been checked, and it is sold as junk. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.29 Operation confirmation (noise appears. (As for junk items, they will be handed over as is.)
Accessories: none
Main specifications: W360 x H128 x D270 mm 3.8 kg
A self-made power amplifier that imitates JBL amplifiers of yesteryear. There was a sound when checking. Details unknown, I will sell it as junk because I made it myself. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.27 sound confirmation (it will be handed over as is for junk items.)
Accessories: none
Main specifications: W380 × H141 × D290 mm 8 kg
The stylus chip is left, but the cantilever's sideways sound output has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.29 Operation Confirmation Unchecked
Accessories: none
Main specifications: 10.5g dead weight
The stylus chip is left, but the sound output has not been checked. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.29 Operation Confirmation Unchecked
Accessories: none
Main specifications: dead weight 9.0 g
The stylus chip remains, but the screw mounting part is damaged on one side. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.29 Operation Confirmation Unchecked
Accessories: manual, original box
Main specifications: 8.5 g dead weight
It's broken from the base of the cantilever and is gone, so I can't make a sound. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.29 Operation Confirmation Unchecked
Accessories: None ※No shell
Main specifications: 6.5 g dead weight
The cantilever broke off in the middle and is gone, so I can't make a sound. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance Information: 2024.5.29 Operation Confirmation Unchecked
Accessories: needle cover
Main specifications: dead weight 6g
※Conduction was OK, but since there is no PSE, it's junk. Please use the power cable 1.2 m to remove parts, commonly known as the “blue snake,” BLUE NOTE. Although the cable is thick, it is very light and handling has been improved. *Member prices are not applicable for junk items (Satoshi Yonejima)
Maintenance information: 2024.5.28 continuity confirmed
Accessories: No accessories
The disposal price has been reduced! 2024/5/29 sales price 5,000 yen I was able to confirm the sound output when checking, but since clearance with the board cannot be obtained and it is on the verge of rubbing, I will sell it as junk. The needle cover is missing, the body is dull, and there is a feeling of use. Please use it as a parts remover. *Member prices are not applicable for junk items (Murakoshi Yoichi)
Maintenance information: 2024.5.26 Operation confirmed (the body seems to be scratched because clearance cannot be obtained. (As for junk items, they will be handed over as is.)
Accessories: none
The disposal price has been reduced! 2024.5.26 The sales price has rotated to 15,000 yen, but it is slightly unstable and the sound output has not been checked. The exterior has stains, scratches, and sagging arm weights, and missing main weights, dust covers, etc. Please use it as a parts remover. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Maintenance information: 2024.5.26 Operation confirmation The rotation is rotating, but it is slightly unstable and the sound output has not been checked.
Accessories: None ※ dust cover missing
Main specifications: W471 × H175 × D351 mm 10 kg
The disposal price has been reduced! 2024/5/27 sales price 8,000 yen We were able to confirm continuity, but since PSE has not been obtained, it's junk. Star Electric booster. Please use it as a part remover. There is an appearance, dullness, and feeling of use*As a junk item, membership prices are not applicable, there is no guarantee, and it is sold as is (Kobayashi Hitoshi)
Maintenance information: 2024.5.26 Continuity confirmed (it will be handed over as is for junk items)
Accessories: none
Main specifications: rated input 2 kVA output 115 V, 125 V switching cable length approx. 2.0 m W200 x H166 x D180 mm 7 kg
The disposal price has been reduced! 2024.5.25 sales price 30,000 yen*Since the test machine has not been checked, it is treated as junk (heater conduction was OK. We do not check filament with tube checkers or amplifiers) Set of 2 transmission tubes with original box*Member prices are not applicable due to junk items (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced! 2024/5/25 sales price 8,000 yen The power is turned on, but it's junk because there is an operation problem. There are stains, scratches, and stains on the exterior. Please use it as a parts remover. *Member prices are not applicable for junk items. (ASAINE Tomonori)
Maintenance information: 2024.5.25 Unmaintained ※Since it is a junk item, it will be delivered as is without warranty.
Accessories: none
Main specifications: external dimensions: width 415 x height 388 x depth 186 mm, weight 10 kg
Disposal price reduction. 2024/5/18 selling price 300,000 yen Studer CD player. It's junk because it doesn't load. Please use it as a parts remover. On the exterior, there are small scratches and cracks in the disc plate. *Member prices are not applicable for junk items (Tamura Eiji)
Maintenance information: 2024.5.18 Operation confirmation (unreadable, there is a crack in the disc plate)
Accessories: instruction manual, power cable
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
Disposal prices have been reduced! 2023/6/22 sales price 5,000 yen ※ It's junk because the distortion of the individual on one side is large. A PA speaker for Yamaha vocals. Please use it to remove parts. You can see a feeling of use such as appearance, rust, dullness, threads, etc. ※Member prices are not applicable for junk items (Kobayashi Hitoshi)
Maintenance Information: 2023.6.19 Operation check (individual distortion on one side. (As for junk items, they will be delivered as is.)
Accessories: none
Main specifications: W335 x H745 x D240 mm 14.8 kg
Disposal price reduction. 202,3/3/10 sales price 50,000 yen for 1 bottle only. A front-load bass reflex enclosure used in the A7-500-8E etc. in the early 80s. Made of solid particle board with embossed coating. On the exterior, there are screw holes and stains on the top plate. *The membership price does not apply to junk items. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: screw pitch 383 mm W757 x H1060 x D610 mm 58.7 kg (actual measurement)
Disposal price reduction. 2023/3/10 sales price 50,000 yen 1 bottle only. Front load bass reflex enclosure used in A7-X etc. in the latter half of the 70s. Made of hard particle board, it has a sense of weight, and the box also makes a modest noise. The exterior has screw holes and dirt marks on the top plate. *Member prices are not applicable for junk items. (TAKIMOTO Yutaka)
Accessories: none
Main specifications: screw pitch 383 mm W757 x H1062 x D610 mm 54.5 kg
There was a sound, but it was MID only, and there were no Hi and Low sounds. Please use it to remove parts. The exterior has dents, abrasions, dirt, dullness, and rust. *Member prices are not applicable for junk items (Katsutsugu Hiura)
Maintenance information: 2022.11.7 Unmaintained ※Since it is a junk item, there is no warranty and it will be handed over as is
Main specifications: W320mm×H560mm×D295mm 16kg/book