Currently sold. This is a self-made 10cm full-range 1-way speaker with unknown details. There is no problem with the sweep or music signal, but the current situation is because it is cheap. There are bond marks on the exterior and center cap, and a feeling of use can be seen, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: none
Main specifications: W120 x H200 x D122 mm 2.5 kg (actual measurement)
Phono cable 1.2m L-shaped plug to RCA plug self-made phono cable using OYAIDE 102 SSC. The previous owner used it on the FR/FR-54. Details unknown (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
The price has been drastically reduced! 2024/5/18 sales price 39,800 yen Flat speaker using 600 neodymium magnets. It is built into a self-made enclosure. It is an audio speaker that is mainly used outdoors for station announcements and as a large digital signage product for outdoor use. As for the exterior, there are screw holes in the top plate, and there are dullness and small scratches all over (Yonejima Satoshi)
Maintenance information: 2024.5.18 sweep test good
Accessories: No accessories
Main specifications: MCMA multi-cell flat speaker impedance 8Ω frequency specification 90Hz to 10kHz W270 x H375 x D205 mm 5.2 kg (actual measurement)
Comes with original box! This is an 8cm full range unit from MarkAudio's ALPair series. It is a self-made unit that is attracting attention because of its technical ability, which has been produced with high accuracy, and has advanced playback capabilities, such as precise and delicate high frequencies. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 operation confirmed
Accessories: original box
Main Specifications: 8cm full range speaker 4Ω 95-30,000 Hz 85.45dB 10W
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
Inexpensive because it is in poor condition. 38cm enclosure. Originally, the ALTEC 604-8G was included. There are many scratches, cracks and peeling on the decorative plate, and there is screw licking*Shipping is estimated separately (Oikawa Tetsuji)
Main specifications: W660 x H1005 x D465 mm 35.1 kg
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
A 38cm double configuration enclosure that can be used as a center woofer or center speaker. The previous owner had an electro voice 38cm woofer installed. Comes with casters. There is a lot of feeling of use, such as uneven paint and bolt marks on the top plate. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W1045 x H790 x D604 mm 52.2 kg
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Self-made cabinet for GARRARD 301 with double arm specifications. The 3012 Series 2 and SMG-212 were mounted on the tone arm installation port. You can see the appearance, peeling veneer, abrasions, bruises, etc., and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W760 x H265 x D520 mm 14.4 kg (actual measurement)
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The disposal price has been reduced! Member prices are not applicable. 2022/7/16 selling price 100,000 yen wooden 46cm double woofer type. Baffle opening diameter 425mm Screw pitch 490mm Baffle and enclosure plate thickness 24mm Duct opening diameter 108mm Both the front and back plates cannot be removed. There is a difference in discoloration on the left and right in appearance, and there are corner chips, digging scratches, and dirt stains. (Yutaka Takimoto)
Accessories: none
Main specifications: W1600 × H950 × D850 mm (actual measurement) The weight has not been measured, but it seems that it is 100 kg or more.
The price has been reduced. 2020/4/17 Selling price 5,000 yen Unspecified wooden front baffle. If you are a self-made group, come on. There are scratches and stains scattered, uneven painting, corner chips, etc. (Takasaki Atsushi)
Accessories: none
Main specifications: opening diameter 280 mm bass reflex opening W292 × H80 mm W400 × H610 × D20 mm 1.8 kg/sheet
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
The price has been reduced. 2018/3/3 selling price 10,000 yen Technics ring for fixing horns. Recommended for self-made people (Oikawa Tetsuji)
Accessories: none
Main specifications: Inner circumference diameter 95mm (actual measurement)