Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg
Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord, RCA cable, original box
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
Maintenance such as mechanical ASSY replacement has been completed at Denon! A SACD player with a full aluminum chassis and aluminum tray. Similar to the regular series, the D/A section is also equipped with AL24 processing. The supple sound is pleasant enough to listen to. He's an authentic player who doesn't make you feel the size (Daiki Goto)
Maintenance information: 2024.6.6 Maintained (loading mechanism part, traverse mechanism replaced. Each part was inspected and operation tested.)
Accessories: remote control, instruction manual, power cable
Main specifications: SACD/CD player MP3/WMA file CD playable 1-bit DSD/16-bit linear PCM line output 1 system (RCA), 2 digital output systems (coaxial x 1, optical x 1) W300 x H80 x D310 mm 7 kg
The price has been drastically reduced. 2024/5/5 sales price 22,000 yen. ※Since there is a lot of deterioration in the exterior, it is inexpensive. A popular DIATONE bookshelf. Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
The current state is just the main unit and the dust removal brush. Discwasher record care system The cleaning liquid is out of stock, so it's cheap. The touch and grip when you hold it is reminiscent of a brush from a luxury shoe cleaning kit. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: original box, brush
Main specifications: W121 x H60 x D58 mm (actual measurement)
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
The winding of the mainspring is smooth and can produce sound, but the platter swells, and there is no screw in the hinge and the lid comes off, so it is sold as it is. The volume is not big, but I feel good in the cohesion of the sound. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.8 operation confirmed
Accessories: handle
Main specifications: W400 × H335 × D470 11.95kg (actual measurement)
Pair tube, 6BQ5 compatible ball, made in Yugoslavia, foot, measured value 70/70 (rejected value 50) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
※1 bottle only. This is a 10 cm full range unit from FOSTEX. It is a very popular model for those who make their own speakers. The sound quality is bright and has an impression of tension. Dull, there is a feeling of use (Sasaki Shota)
Maintenance information: 2023.8.11 sound output tested
Accessories: manual, original box
Main specifications: full range aperture 10 cm maximum input 15 W 8 ohms magnetic flux density 13000 gauss baffle aperture diameter 9 cm recommended enclosure volume 15 L
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
1 bottle of KT88 compatible ball, made in America, metal base, LUXMAN print measurement value 54 (rejection value 44), base with replacement box, has dullness ※ measured values indicate GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Set of 2 (the internal shape seems to be the same, but the manufacturer country print is different (made in Canada/USA), so they are not treated as a pair), brown base measurement value 44/42 (rejected value 25), getta burns, and decreases) *Measured values indicate GM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
Sound can be produced, but there is uneven rotation and sound cracking, so it will be sold as it is. The volume is not loud, but it has a soft tone that creates a nostalgic atmosphere. The appearance is a stain scratch kusumi of the age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 Operation confirmed
Accessories: handle, paper horn
Main specifications: W278 × H78 × D300mm 3.7kg (actual measurement)
Large triode sold per unit measured IP value: 50 mA (the best standard IP value for this amplifier is 50 mA) There is a getter burn with the original box ※ I checked the sound output and measured the plate current value with the test amplifier, and it was determined that the operation was good (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
The price has been drastically reduced. 2021/9/22 sales price 99,800 yen This is Hayami's horizontal audio 5-tier rack with 3 tiers added to the GT-9731. A style that is faithful to the basics with a focus on standards. It is a design that combines functionality with a sense of luxury. The exterior has a lot of damage, dirt, stains, etc., and there is a feeling of use. There is sagging due to damage to the dowels on the side plates and partition boards, missing dowels, etc. (TAKIMOTO Yutaka)
Accessories: None ※3 lower shelves are missing
Main specifications: W1724 x H1380 x D580 mm approx. 185 kg
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
※Woofer cones are highly deformed, so they are inexpensive. Maintained in January 2024! It is a Harves speaker with increased appeal, such as the richness of the sound typical of an HL MONITOR. The Harves-like sound, which is characterized by a relaxed sound in addition to the mid-range density unique to those made in England, is attractive. Exterior maintenance has been carried out on the exterior, but in addition to scattering repair marks, there is a feeling of use over time, such as undulations on the woofer edge. *Saran net is not included. Serial 3349A 3349B (Tomonori Asaine)
Maintenance information: 2024.6.6 exterior repair maintenance (exterior chip repair (conspicuous areas only), front baffle painting) 2024.1.12 maintained (exterior repair stain colored front baffle repair polishing paint rear baffle cleaning
Woofer edge repair, protective agent application (with undulations), terminal replacement unit, detachable tweeter, corrosion, disconnection repair, diaphragm, dome coat treatment, 1 voice coil, bobbin deformation correction)
Accessories: none
Main specifications: 2 way 2 speakers, 22.5 cm cone woofer/2.5 cm soft dome tweeter impedance 8 Ω crossover 2,000 Hz sound pressure level 87 dB, W325 x H640 x D330 mm, 13.5 kg
This is a replacement needle compatible with HITACHI MT-10 and M T-22. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g