The price has been drastically reduced. 2024/1/4 sales price 500 yen. Self-made audio board with unspecified details. Audio board made by wrapping cloth around the board. The board material is unknown. There is a lot of feeling of use on the exterior, scuffs, scratches, stains, torn cloth, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W460 x H40 x D350 mm 4.6 kg
Set of 5 LP/SP switchable replacement needle for Columbia PU-1270, PU-1280, and SPC-310 DTS-2 compatible Unopened, operation unconfirmed (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Good condition with original box! OTG cable compatible with portable devices equipped with Lightning terminals. Can be used with products equipped with USB Type-C. By using a mesh sheath that is resistant to compression and twisting, and aluminum alloy is used for the plug, faster and more stable transmission is achieved. (FUJISAWA KOSHI)
Maintenance information: 2024.2.6 continuity confirmed
Accessories: original box
Main specifications: Lightning-USB TypeC total length 138mm cable length 80mm (excluding plug)
Micro stroboscope It comes with an overhang gauge, so it's convenient to have one. There are small scratches and dents on the exterior (Yonejima Satoshi)
Accessories: No accessories
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
A 38cm double configuration enclosure that can be used as a center woofer or center speaker. The previous owner had an electro voice 38cm woofer installed. Comes with casters. There is a lot of feeling of use, such as uneven paint and bolt marks on the top plate. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W1045 x H790 x D604 mm 52.2 kg
A single-by-wire rocket series entry model with a 3.0 m pair of banana plugs at the end of the speaker cable. Divided into 4 conductor paths, the sound quality is more dynamic with a structure that suppresses malignant interactions that occur between the 2 conductors. Also, although it is composed of a semi-single-wire conductor arrangement, it has a highly flexible cable structure. There are abrasions etc. on the sheath (Kojima Yosuke)
Accessories: original box
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
HUBBEL's unspecified outlet plate. The material is similar to the P80W and NP8I, and it is ivory-colored. There is a scuff on the side (Murakoshi Yoichi)
Accessories: screws
The disposal price has been reduced! (Member discounts are not applicable) 2023/11/11 sales price 99,800 yen Maintained! A preamplifier that can be operated by a full remote control. A familiar quad tone that is natural, easy to listen to and won't get tired of. In addition to volume, left and right balance, input switching, etc., it is fully equipped with functions such as TILT (loudness like function) and high pass and low pass filters (2 levels each), which is convenient. The exterior has peeling paint and repair marks on the bottom. Serial Q 202547 (Tamura Eiji)
Maintenance information: Maintained on 2015.2.23 (reworking the solder on the printed circuit board pattern on the power switch part of the amplifier body. Electrolytic capacitor replacement in the main unit. The CD/PLAY button installation on the remote control has been reworked. Remodeling the remote control emitting diode mounting position. aging test. (Check the operating distance range of the remote control → around 5m)
Accessories: remote control, power cable
Main specifications: full remote control control amplifier with PHONO input W321 x H80 x D255 mm 3.3 kg
The disposal price has been reduced! (Member discounts are not applicable) 2022/2/5 sales price 2,000 yen ※1 bottle only. The speaker stand compatible with BOSE's various surround speakers is compatible with the 3,2,1 series, AMS-series, AM series, FreeStyle, and LS series. The exterior is dull and has a feeling of use. (ASAINE Tomonori)
Accessories: none
Main specifications: W177 x H968 x D254 mm 3.1 kg
Replacement needle for ONKYO Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
SONY ND-220G compatible replacement needle. Since there is no main unit, it has not been checked (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
The price has been reduced. 2023/12/11 sales price 2,500 yen I think it's a shelf board for the company's rack GS-622. There is a scratch on the horn (Oikawa Tetsuji)
Accessories: fastener
Main specifications: W528 x H26 x D470 mm 4.3 kg (actual measurement)
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Pair tube, 6L6GC compatible ball, high reliability tube, made in America lot: 8526/8526 measured value 44/42 (rejected value 25) with replacement box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube, large beam output tube, 8147 compatible bulb, gray plate for Hi-Fi, with original box (outer box/inner box), has slightly decreased getter for both tubes ※ The pair measures and determines EM values with the measuring machine TC-162 (Kojima Yosuke)
Accessories: original box
Pair tube, EL84 compatible ball, pentode tube, made in Japan, measured value 84/80 (rejection value 50), both tubes have pin bends ※ pairs are determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube 6BQ5 high reliability tube made in Japan measured value 72/68 (rejection value 46) *Pairs are determined based on GM values measured with the TV-7 test machine (Kojima Yosuke)
Accessories: none
Pair tube 6BQ5 compatible ball pentode tube measurement value 66/66 (rejection value 50) with original box SIEMENS print is printed, but it was determined from the structure and date code that it was made by Ei (made in Yugoslavia) ※The pair was determined based on GM values measured with the TV-7 testing machine (Kojima Yosuke)
Accessories: original box
Pair tube, triode, metal base, made in America, with original box, the size of the glass tube is different on the left and right, but the internal structure is the same ※The pair is determined based on EM values measured with the SENCORE TC-162 test machine (Kojima Yosuke)
Accessories: white box
Pair tube, triode, metal base, made in America, comes with a box, is inexpensive because there are fewer gutters and there are burns ※Pairs are determined based on EM values measured with the SENCORE TC-162 test machine (Kojima Yosuke)
Accessories: white box
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual copy source box
Main specifications: 52g per weight
Disposal prices have been reduced! (Member discounts are not applicable) 2022/10/9 sales price 2,000 yen Audio Pro speaker Bravo ALLROOM SAT bracket. This is a wall mounting accessory. The exterior is generally good (Takahashi Nobuyuki)
Accessories: instruction manual original box
Main specifications: 52g per weight
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
This is a replacement needle compatible with HITACHI MT-10 and M T-22. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
HITACHI DS-ST40 COMPATIBLE This is a replacement needle for MT-10 and MT-22. Unchecked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
※Shipping service. “Audio Vacuum Tube Manual” /Published by Radio Engineering Company/by Ichiki Yoshinori/A revised edition that carefully selects the “All Japan Vacuum Tube Manual” published in Showa 33 for audio applications. S60.7.20 first edition issued. The photograph is a sample, so the actual product may be broken, written, etc.
Pair tube, 6BQ5 compatible ball, made in Yugoslavia, foot, measured value 70/70 (rejected value 50) with original box ※ pair is determined based on GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: original box
※Shipping service. Special Feature = Internal and External Tweeter Research/Modern Noise Thoughts Vol.3/SR Speaker Research/New BLT Amplifiers/Sound Field Correction Using Partitions/Driver Tube Research/Frontier Technology “VHD Technology” /Published Circuit Diagram: ElectroVoice TL505 Enclosure/Mixing Console and Noise///S59.10.1 published. The photograph is a sample, so the actual product may be broken, written, etc.
※Shipping service. Special Feature = Contemporary Noise Thoughts Vol.2/Overview of American 3-Pole Output Tubes/Mos-FET Single Stage OTL Amplifier/Medium Monitor Speaker Research/New Feedback Circuit Type DC Preamplifier/38 cmW Woofer System Vol.4/Published Circuit Diagram: PIONEER CT-580/S57.5.1 Issued Photographs are samples, so the actual product may be broken or written.
1 bottle of KT88 compatible ball, made in America, metal base, LUXMAN print measurement value 54 (rejection value 44), base with replacement box, has dullness ※ measured values indicate GM values measured with test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Special Feature = CD Era Vacuum Tube Preamplifier/GEC DA30/MOS FET 1 Stone Power Amplifier/82' Audio Technology of the Year/Precision Processing Technology for Players/New JBL Driver 2445J/Large Diameter W Woofer 21 Models/Summary of Published Circuit Diagrams: Technics SU-V7A/HAFLER DH500/S58.3.1 Issued. The photograph is a sample, so the actual product may be broken, written, etc.
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Pair tube 6SL7 equivalent tube military tube brown base ring getter measurement value 52 (rejected value 32) with original box ※The measured value shows the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none