※Chips and oxidation are conspicuous in the horn part, so it is inexpensive. A tweeter representing JBL. It gives an expression with a greater sense of depth and breadth than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
The price has been drastically reduced! 2024/4/25 sales price 69,800 yen ※Currently sold. This is an AUDIO PHYSIC superwoofer. You can enjoy very powerful bass. The crossover can also be switched between 32/46/61/80/105 Hz, which is convenient. As for the exterior, there are line scratches, saran net holes, dull stains, etc. on the top plate. Serial 573 (Yonejima Satoshi)
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: spikes, saran net
Main specifications: W260 x H625 x D400 mm 26 kg
Maintained by the manufacturer! The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There is dullness and a feeling of use. Serial 1050502942 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 manufacturer maintained (main volume and selector switch disassembly contact cleaning. (Idle current adjustment and operation inspection carried out.)
Accessories: power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible dimensions W434 x H180 x D478 mm weight 22 kg
C-Quenze series woofers are in stock from Danish Audio Technology. Strong magnets are combined with soft edges and dampers to produce an amazingly rich finish and firm bass. Serial 26877, 26883 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: aperture: 15 cm, impedance: 8 ohms, output: 120 W, efficiency: 88 dB, outer diameter: 155 mm, depth: 74 mm, opening dimensions: 131 mm, weight: 2.0 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. The efficiency is also good, so it's easy to play, and the chic design with the mirror piano paint shines is characteristic. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI)
Maintenance information: 2024.4.9 operation confirmed
Accessories: saran net
Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
The price has been reduced! 2024/5/9 sales price 65,000 yen*It is cheap because the paint is in poor condition, such as peeling paint or soldering. Electrovoice's finest horn tweeter. It is a diffraction type unique to the Electrovoice, which is slightly larger than the T35. A phenolic diaphragm with silk as the core material, and an Alnico V magnet comparable to a scoker are used for the magnetic circuit. The exterior has scratches, paint peeling, and solder marks on the terminals. One side plate is missing (Yonejima Satoshi)
Maintenance information: 2024.5.9 oscillator test is good
Accessories: No accessories
Main specifications: playback frequency band 3,500 to 15 kHz impedance 8 ohms recommended crossover frequency 3.5 kHz or higher W73 x H191 x D125 mm 3.2 kg
The price has been reduced! 2024/3/4 sales price 59,800 yen ※The diaphragm has been replaced with a genuine JBL D8R2425. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are appealing, which is unbelievable for some input. Scratch marks and paint peeling can be seen. Serial 62206, 62240 (Fujisawa Yukishi)
Maintenance information: 2024.3.4 maintained (diaphragm installation adjustment (diaphragm comes with D8R2425) genuine JBL product. (The pad dampener has been replaced.)
Accessories: No accessories
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
※1 bottle only. Maintained! This is a rare blue frame (above) model LX5. The impedance is 8 ohms, and the cross is 500 Hz, so be sure to use a 175 or 375 driver that uses 8 ohms! There are spots, rust spots, and small scratches. (Honda Maki)
Maintenance information: 2021.12.21 Conductivity confirmed 2019.4.4 Maintained (re-fix the internal coil with silicone agent. Remove rust from terminals and mounting screws, clean, and tighten. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: No accessories
Key Specifications: Crossover Frequency: 500 Hz Level Control: 3 Position Switch Input Impedance: 16 ohms 159 x 153 x 120 mm 2.3 kg
Maintained in October 2022! A network with a crossover frequency of 7 kHz. Ideal for MID/HIGH 3-WAY systems using the 2440. On the exterior, paint is bald and oxidized (Yonejima Satoshi)
Maintenance Information: 2022.10.7 Maintained (Terminal rust removal, acid cleaning, insulation bushing & mounting screw replacement. ATT replacement A frequency characteristic measurement check (~ approx. 42 kHz) was performed, and the original capacitor was continuously used for good results. Input/output waveform and balance check, sound output check.)
Accessories: no accessories
Main specifications: crossover frequency 7 kHz allowable input (continuous program) 50 W impedance bass range: 12 to 16 ohms treble range: 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg
Maintained! Sansui's rare CD player. The firm outline and comfortable sound are attractive. I would like to use it in combination with the company's α series premain for a unified look. In addition to listening to CDs, it also has a convenient function when recording to tape, etc., and has a variety of aspects. The exterior has scratches, line marks, etc. Serial 619097168 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Maintained (loading and clamp mechanism drive belt replacement. Front panel operation tact switch replacement. Optical system cleaning cleaning)
Accessories: No accessories
Main specifications: 1-bit linear & direct conversion system (4DAC) W430 × H127.5 × D397.5 mm 8.8 kg
The price has been reduced! 2024/5/14 sales price 55,000 yen direct drive analog turntable. Equipped with a knife-edge tone arm in collaboration with SAEC. A Sumiko Oyster cartridge is also included, and it also has a built-in phono equalizer, so you can enjoy records right away. The exterior is good with no noticeable scratches. Serial 2280200 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: instruction manual, AC adapter, connection cord, cartridge, head shell, original box
Main specifications: direct drive aluminum die-cast static balance type S-shaped tone arm length 223 mm needle pressure variable range 0 g to 5.0 g applicable cartridge mass 3.0 g to 12.0 g, 14 g to 23 g (including attached headshell) cartridge part: mm type output voltage 4.0 mV needle pressure 1.5 to 2.5 g mass 5.3 g analog output terminal: RCA pin jack (phono/line switching type) W420 x H117 x D356 mm Weight approx. 6.1 kg
M/MC compatible A tubular phono equalizer developed with the aim of better analog reproduction. You can enjoy a warm, natural sound using a vacuum tube non-feedback amplifier and a CR-type equalizer. The impedance can be switched according to the cartridge. Externally, there are line scratches on the top plate. Serial 00180 (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cable
Main specifications: MM/MC compatible 12AX7 (ECC83) x 2 W300 x H100 x D260 mm 4.8 kg
*The 2-tier rack decoupler spike holder is not included. You can see the attention to design and sound quality at a high level, such as slits that have been carefully thought out for heat dissipation effects and resonance, and solid aluminum pillars. There are some threads and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: W597 x H455 x D475 mm between shelves 326 mm
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (replacement of defective output relay contacts. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg