Maintenance has been completed, but since corn paper repair marks remain, it is inexpensive. A cutting-edge unit installed in the high-end model K2 S9800. The unit alone is also highly evaluated, and it stretches flat to a very high range, and it is a dynamic sound. As for the exterior, there are repair marks and wrinkles on the corn paper. Serial 01522, 010034 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 maintained (center cap replaced, part of the cone paper torn back side repair)
Accessories: No accessories
Main specifications: 15inch pure pulp cone woofer with Alnico 5DG magnet 8Ω 400W playback frequency band 20Hz to 2kHz minimum resonance frequency 26 Hz 94 dB recommended crossover frequency 800 Hz outer diameter 387 mm x depth 235 mm 18 kg
Maintained! Sigma cable included! The highest-grade varicon tuner at the time, which is still highly popular! It uses a high-precision 7-frequency linear varicon, and you are amazed at how vivid it is as if you were listening to the studio sound as it is. Please experience sound quality that cannot be enjoyed with a digital synthesizer tuner, which combines both good sensitivity and sound quality. There are scratches and scratches on the exterior. Serial 47K10029 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (comprehensive inspection, adjustment, and correction of modified parts of the board. Replace deteriorated LEDs and add current limiting resistors and diodes. Fixing and repairing damaged parts of the board. (Overall adjustment of the RF system and MPX system)
Accessories: sigma cable, simple FM antenna
Main specifications: FM dedicated tuner, 7-speed varicon, W480 x H147 x D423 mm, 12.4 kg
Maintained! An attractive power amplifier with rich, powerful sound quality that is a bit different from modern Accuphase. The outstanding sound quality with excellent driving feel goes great with 70's JBL speakers. The sound quality is comparable to that of the advanced 300 series. Serial B6Y617 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (transistors, electrolytic capacitors, semi-fixed VR, resistors, etc. replaced. Solder correction. SP switch polishing cleaning. Card edge contact cleaning. Increase and tighten the output elements. Bias and offset check adjustments. Output audio check)
Accessories: instruction manual, power cable
Main specifications: 100W+100W (8Ω) output 3 systems input 2 systems (REAR/FRONT) speaker damping switching system (NORMAL/20, MEDIUM/5, SOFT/1) Dimensions W445 x H165 x D355 mm Weight 19.5 kg
Maintained! One of Sansui's few 2 to 4 way NF type channel dividers. It is a channel divider that pursues basic characteristics and multiple functions, and features a highly saturated tone that is close to JBL speakers. After adjustment, the ceiling panel is clean and the design is excellent. There are scratches and scratches on the exterior. Serial 238070032 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 Maintained (mode selector disassembly contact polishing. Frequency selector x 6 disassembly cleaning Other volume cleaning. (Replace diodes and transistors to enhance power supply)
Accessories: front panel
Main specifications: 2/3/4 way NF filter channel divider with SNR 90dB or higher cutoff frequency (± 10%) [F1] 60/75/95/120/150/190/240/300/380/480/600/750/950/1.2k/1.5k/1.9k/2.4k/3kHz [F3] 1.5k/1.9k/2.4k/3k/3.8k/4.8k/6k/ 7.5K/9.5K/12K/15kHz low star function installed (turnover 60 Hz/100 Hz) W482 x H88 x D305 mm 6.4 kg
※Since it is cheap, it will be handed over as is. Comes with a remote control! CD-RW compatible CD recorder. This model is equipped with a TEAC high-performance CD/RW drive capable of 4x speed recording. There are small scratches on the exterior. Serial 0240023 (Yonejima Satoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, instruction manual
Main specifications: CD-RW compatible CD recorder, 4x speed recording, finalization, 4x speed microphone, analog output (RCA), 1 system, 2 digital input/output systems each (optical/coaxial), 1 microphone input system, 1 system, W435 x H102 x D312 mm 5.5 kg
Genuine Diatone DS-3000 stand. It provides firm support at 4 points. It is a wooden stand with a beautiful finish on the pillars and handrails. There are small scratches and threads on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W470 x H272 x D380 mm approx. 5.5 kg
A slow starter that slowly starts the connected device and protects it from inrush current when the power is turned on. PSE standard product The front panel indicator gradually brightens in sync with the gentle power start, and you can visually confirm the soft start. Serial 0919HA7026120709 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 continuity confirmed
Accessories: No accessories
Main specifications: Output/input capacity 1500 VA, output frequency 50/60 Hz, standby power 0.01W or less, W130 x H94 x D267 mm (without protrusions) 1.8 kg
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
※It is inexpensive because it leaves cracks in the VOL. A headphone amplifier that allows you to enjoy the sound of 2 systems: a vacuum tube and a transistor. It has a built-in USB DAC compatible with 24 bit 96 kHz, and it is a blissful item that allows you to immerse yourself in both digital and analog worlds to your heart's content. Scratches on the transformer area are slightly noticeable. Serial 12060066 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed (sound output OK, gaps remain in VOL)
Accessories: instruction manual, power cord
Main specifications: Vacuum tube using a class single headphone amplifier 6BM8 x 2 vacuum tube output 20Ω to 600Ω (45mW to 135mW) transistor output 12Ω to 300Ω (40mW to 135mW) frequency characteristics 10Hz to 50,000 Hz SNR 89dB power consumption 30W size W190 x H150 x D250 mm mass 4.7 kg
Maintained! A hit model in the heyday of audio by Sony. It has a relaxed, thick tone that you won't get tired of listening to, and it faithfully expresses the sauce without unnecessary seasoning. There is a chip on the corner of the side panel. Serial 203719 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 maintained (replaced with a custom-made product due to VR loud sound, speaker relay replaced, MUTIG push SW replaced, other INPUT selector SW, cartridge LOAD SW, TAPE selector SW, SW disassembly contact polishing grease applied, other DC bias DC balance adjustments, confirmation of sound output for each input/output terminal connection)
Accessories: No accessories
Main specifications: 105W+105W (8Ω) PHONO MM/MC (40Ω/3Ω) W430 × H161 × D436 mm 19.6 kg
Beautiful item with original box! An introductory model of an MC cartridge equipped with an oval needle bonded to an aluminum cantilever. It features delicate, clear, and highly transparent expressions. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: Playback frequency range 20 to 30,000 Hz output voltage 0.32 mV needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 12 ohms recommended load resistance 100 ohms or more (when connected to a head amplifier) stylus joint oval needle aluminum pipe cantilever mass 7.6 g
※The display is uneven, so it is inexpensive. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
The world's standard club mixer model, which won the Best Club Mixer award in 2002 and 2003. Equipped with a 4-band EQ, the 4 dual stereo channels can be freely crossfaded, and are compatible with various mix styles and performance styles. High sound quality is also a factor in its popularity. It is dull and has a feeling of use. Serial X262120X172629 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 6 x dual stereo input 4 x RIAA (phono) input 2 x microphone input 4 band EQ high quality P&G/VCA fader analog VCF x 2 channel & master/cue peak meter split cue function booth monitor out frequency characteristics 20hzto40kHz+0/-1dB maximum power consumption 30W size W320 x H105 x D358 mm 5 kg
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
Beautiful item with original box! The MK2 CLUB from the Concorde series with an integrated headshell, is a staple of DJ play, and is now in stock for the first time at Hi-Fi. It is clear and stands out for its wide range. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, original box, needle cover
Main Specifications: Output voltage: 8mV Channel separation: 25dB (@1kHz) Frequency band (at -3dB): 20-20,000 Hz Stylus: Special Elliptical Appropriate Needle Pressure: 3g Dead Weight: 18.5g
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
Comes with original box Oyaide high quality power plug. The dual monocoque housing made of POM and aluminum has outstanding mechanical strength, and also boasts excellent vibration damping characteristics and noise resistance. Then, beryllium copper was newly adopted for the electrode part, and two-layer platinum+palladium plating, which was determined repeatedly through thorough audition tests, was used for plating (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: Suitable for cables, outer diameter minimum 6.5 mm maximum 17 mm
*Lead wire missing. Popular wood headshell Asada cherry blossoms from Hokkaido are used as the material, and it is a hard, good-sounding material that is also used for speakers and headphone cases (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: No accessories
Main specifications: Hokkaido Asada cherry heartwood self-weight 10.4 g
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input 160 W, W650 x H204 x D314 mm, weight 14 kg
The price has been reduced! 2024/6/1 sales price 69,800 yen Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. There are some scratches on the diaphragm on one side. Serial 60878/74750 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (diaphragm installation adjustment, pad dampener installation, screw rust replacement. Wiring terminal contact cleaning, terminal dirt cleaning. Insulating bushing replacement. Diaphragm dirt cleaning. DCR (29324/6Ω diaphragm undamaged) DCR (33387/5.8Ω diaphragm damaged)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! This is a JBL mid to high range driver. It is also used in the S2600 and S3500, etc., and the well-balanced sound quality with both strength and subtlety is truly a JBL. It can be used on various systems with easy-to-use specs. The exterior has peeling paint, dullness, etc. Serial 041250 041277 (Yonejima Satoshi)
Maintenance information: 2024.6.1 maintained (diaphragm installation adjustment, pad dampener and screw connections OK. DCR (041250/3,4ohm diaphragm no scratch) DCR (041277/3,0ohm diaphragm no scratch))
Accessories: No accessories
Main Specifications: High Range Driver Throttle Diameter 25mm Impedance 8Ω Frequency Range 500Hz to 20kHz Pure Titanium Crossover Frequency 800Hz W147 x H147 x D105 mm 4.3 kg
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
The next generation model of the L-550AX has been reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring the glossy and dense sound unique to pure A class amplification systems. There are no noticeable scratches on the exterior. Serial G60800238 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
This is the 3rd generation model of the 500 series with the familiar clean power supply. It secures and supplies clean power that is free from dirty electricity mixed into the home. Now in the 3rd generation, it is an excellent item where progress can be seen not only in the transparency of the mid to high range, but also in the sense of energy in the low range. As for the exterior, there are line marks on the back. Serial D2Y023 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: instruction manual, power cord, original box
Main specifications: rated output capacity 510VA, rated output voltage AC100V±1V output outlet, 3P x 8 meters/input/output voltages, strain rate, etc. Switch between 6 types and display W465 x H181 x D386 mm 23.8 kg
Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord, RCA cable, original box
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
The price has been reduced! 2024/5/31 sales price 178,000 yen Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed due to fixed switch. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.)
Accessories: power cord
Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
Speaker cable 3.0 m/4.3 m pair end end uses a μ-conductor with unique processing applied to the PC-OCC conductor for the purpose of reproducing sound with good sharpness, and it is a cable with excellent cost performance that also achieves delicate high-frequency reproduction (Fujisawa Yukishi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: No accessories
In addition to suppressing static electricity and electromagnetic noise by adopting a 0.7 m pair titanium compound sheath, the RCA cable is heat-resistant and can also be used for car audio. It's a bit addictive (Fujisawa Yukishi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: No accessories
Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi)
Maintenance information: 2024.5.31 Maintained (power switch replaced. Output relay replacement. (Switch and volume contact correction)
Accessories: No accessories
Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
Unspecified set of 4 gun type banana plugs. By making it a gun type, the depth is shortened, and it is very convenient for amplifiers placed in racks or speaker systems that don't want to take up space on the back. Dullness and oxidation are slightly noticeable. (FUJISAWA KOSHI)
Accessories: No accessories
This is an acrylic overhang gauge for LP records that is convenient for positioning cartridges. (FUJISAWA KOSHI)
Accessories: none
Main specifications: size 190 x 40 mm thickness 2 mm
This is an LP record overhang gauge that is convenient for positioning cartridges. The mirror surface makes it easy to check the cartridge position (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: size 150 x 35 mm thickness 3 mm
*Currently sold. A small speaker with a 16.5 cm woofer. This is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi)
Maintenance information: 2024.5.30 good sweep test
Accessories: saran net
Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji)
Maintenance information: 2024.5.30 Operation confirmed
Accessories: AC adapter
Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
2022.9.10 This is the first 607 model that has undergone full maintenance, such as replacing capacitors, transistors, and SP terminals! It's one that makes you feel the intricacies unique to the heyday of audio. You can feel the strength of extrusion in the low range when playing LP records and the dynamic sense of dynamism with an intonation in the middle range, which is unique to the golden age of SANSUI. The exterior has dullness and small scratches. Serial 227050109 (Yonejima Satoshi)
Maintenance information: 2022.9.10 Maintained (electrolytic/tantalum capacitors, transistors, SP terminal replacement, RCA terminal polishing. Board cleaning and re-soldering. SW/VR disassembly and cleaning, application of grease to prevent oxidation and sulfation, replacement of tantalum capacitors, electrolytic capacitors, transistors, and heat dissipation sheets in the EQ/TONE section. Semi-fixed resistor, cement resistor, fuse resistor, fuse, relay replacement. Input waveform confirmation, load test (1kHz sine wave, 8Ω load: 65W+65W OK) sound output test)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
The price has been reduced! 2024/5/29 Denon luxury analog player with sales price 89,800 yen. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
※Since there are only 2 shelves, it is inexpensive. Comes with casters Hayami's vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. There are line marks on the exterior (Tamura Eiji)
Accessories: none
Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm (height 1060 mm including casters), weight 58 kg
Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are unique to mono (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: needle cover
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g