Set of 24 Amazon Basic banana plug It can be connected, making it convenient when adding tweeters, etc. If you've been looking for one, go ahead. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Parallel cable 1.4 m pair end RCA plug cable that distributes 2 RCA L and R If you've been looking for one, go ahead. In addition to the exterior and writing on the plug, there is dullness and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
This is PLATANUS MC type phono cartridge. The connection from deep bass to high frequencies is good, and the playback ability is delicate and has a sense of density. You can honestly feel the vivid, dynamic sounds, and even the performer's emotions, and the records you've listened to over and over again until now will play richer and more beautiful music. Magnetic circuits are precision machined and integrated from large chunks of pure iron to enhance rigidity so that vibration energy from the needle tip to the power generation coil is not damaged. The printing has disappeared, and there are small scratches on the body, but the needle tip is good (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual
Main specifications: Playback frequency 10 to 50,000 Hz impedance 2.5 ohms dead weight 16 g
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
Orthophone 95th anniversary special limited set with shell An aluminum headshell SH-4 special limited-edition color red type is attached to the popular 2M Red MM cartridge. This is a high cost performance entry model MM cartridge that is clear, has good sound separation, and fits well with modern sources. *Since there is a crack on the needle cover side, it cannot be fixed to the main body. (MURAKOSHI Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: instruction manual, original box, needle cover (broken claws), brush, screws, shell
Main specifications: [2M RED] MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g [SH4R] gold plated terminal body material aluminum self weight 9.3 g (excluding mounting screws)
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Comes with original box This model was developed based on the 2.0S design concept of the company's higher-level model. The sound has good visibility across the entire band, has a solid sense of density, and has an excellent sense of air. Both stylus and cantilever are good (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, instruction manual
Main specifications: MC type 0.4 mV impedance 4 ohms needle pressure 1.9 to 2.2 g dead weight 12 g
This is a standard JBL monitor that has undergone internal and external maintenance and has been refreshed. The darker and thicker tone compared to the current model still doesn't even seem to be declining in popularity. The thick, exhilarating sound goes well with jazz and rock, and the punchy sound becomes a habit. The exterior is in a beautiful state due to maintenance. Serial 32648 32951 (Yamato Yuki)
Maintenance information: 2024.6.7 operation confirmed
2021.10.15 Maintained (exterior cleaning/repair saran frame painting/net replacement cone paper touchup/tweeter grill dent correction ATT cleaning unit detachable)
2012.1.27 Maintained (ATT replacement, capacitor replacement, input/output waveform and balance check, sound output check, frequency characteristic measurement, front baffle repair (touch-up painting), exterior cleaning, plate attachment (not completely flat because there were already quite a few wrinkles)
Sound output test)
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 45 Hz to 20 kHz sound pressure level 93 dB impedance 8 ohms allowable input 100 W dimensions W362 x H597 x D298 mm weight 20 kg/1
A model that inherits the lineage of 4312. The sense of speed and range has been improved with a completely renewed unit, and it has been transformed into a high-fidelity speaker that can play all kinds of sources with a clean sound with good damping. There is a light thread on the top of the exterior. Serial 13466 13432 (Murakoshi Yoichi)
Maintenance information: 2024.6.6 sound output confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex impedance 6 ohms playback frequency band 45 Hz to 35 kHz output sound pressure level 93 dB size W362 x H597 x D299 mm weight 17 kg
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
※Only 1 bottle is currently sold because it is cheap. Bookshelf speakers made in England. It features compact, tight low frequencies and stretchy mid-high frequencies. There are scratches, threads, and the smell of oil (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: none
Main specifications: 89dB 6Ω W210 × H380 × D220 mm 5.4 kg
Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki)
Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced)
Accessories: remote control, instruction manual, power cord
Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
The price has been drastically reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner. It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches simultaneously (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
※It is inexpensive because it has a lot of feeling of use. A classic disc stabilizer. The moderate weight gives a sense of stability for playing records. The exterior has a feeling of use such as fading due to aging (Kanai Hidetsugu)
Accessories: none
Main specifications: diameter 80 mm height 35 mm dead weight approx. 600 g
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
Full maintenance from capacitor replacement to re-soldering of each board, etc.! The first memorable luxury model in the Sansui 07 series in the era when there was no 907. Starting with the newly developed dual FET at the time, the company's consistent commitment to adopting quadruple detent volumes and large electric power transformers independently on the left and right has already been established. Compared to models from the 80s and 90s, the sense of fulfillment in the phono section is amazing. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.16 Maintained (capacitor, semi-fixed resistor, transistor, resistor, protection relay SP terminal, heat dissipation sheet replacement. SW type terminal cleaning, contact grease coating. Re-solder flux cleaning for each board. Each circuit adjustment, RCA terminals, interior and exterior cleaning. (Various tests)
Accessories: copy of instruction manual
Main specifications: 85W+85W W430 x H168 x D389 mm 16.8 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Maintained! A late model in the classic 607 series. It has high-resolution, well-defined sound, and is compatible with modern speakers. You can experience SANSUI's ability. There are threads and small scratches (Daiki Goto)
Maintenance information: 2024.6.2 maintained (maintenance contents/TONE and other subsonic, loudness, processor, muting, source direct, power amplifier direct, input selector, tape switch disassembly, polishing grease application, output relay replacement, protector capacitor replacement, each volume, switch cleaning, pin jack polishing, internal inspection and cleaning, running test.)
Accessories: copy of the manual
Main specifications: 105W+105W (6Ω) 90W+90W (8Ω) phono MM/ MC switching W430 x H162 x D452 mm 18 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
Maintained in March 2024! A prime amplifier developed during the heyday of CDs and gained popularity. The powerful, punchy sound quality, which combines the quality of the mid-high range with the power of the low frequencies, is attractive. There is room not found in lower models, and you can enjoy the sound with a sense of scale typical of SANSUI. As for the exterior, there is a scratch on the top plate. Serial 611088582 (Tomonori Asane)
Maintenance information: 2024.3.21 maintained (tone and other switches dismantled and polished with grease applied (turnover, subsonic, muting, loudness, processor, input selector, reck-out, power supply direct, source direct, tape, MM/MC changeover switch), power amplifier, power circuit transistor, resistor, adjustment volume, diode replacement, solder repair, each volume, switch Cleaning, output relay, headphone relay replacement, DC, bias adjustment, interior and exterior inspection cleaning, operation confirmation)
Accessories: instruction manual
Main specifications: Advanced α-X circuit equipped with 160W+160W (8Ω) damping factor 150 (8Ω) Phonomm/MC compatible W460 x H159 x D446 mm weight 33 kg
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
Maintenance has been completed, such as creating a new dust cover and replacing capacitors! Micro belt drive middle class player. Coupled with a 3.2 kg heavyweight platter, the tone is extremely quiet and smooth. The cabinet is also highly rigid, leading to thick, stable analog sound. There are dullness and small scratches on the exterior. Serial 49120206 (Yonejima Satoshi)
Maintenance information: 2024.6.1 Maintained (new dust cover created. Motor bearing oil replacement, replacement of deteriorated parts (electrolytic capacitors, semi-fixed resistors, rectifier diodes). Tone arm disassembly/bearing replacement. Lifter disassembly/grease up Speed switching SW, fine rotation adjustment, volume disassembly/contact polishing. Check turntable rotation speed, check arm operation, and needle pressure. Exterior cleaning, sound test, and other operation checks)
Accessories: No accessories
Main specifications: belt drive type static balance type tone arm needle pressure variable range 0 g to 3 g compatible cartridge dead weight 11.5 g to 21 g (including shell) W510 x H155 x D400 mm 13 kg
※It is cheap because it is in poor condition due to numerous modifications. Heavyweight horizontal audio rack It's sturdy, so it's fine even if you put a super dreadnought analog player on the top plate. The inside is slightly larger, so even slightly larger full-size equipment can be stored. Since there are many modifications such as the exterior, attaching a copper plate to the upper right shelf, attaching a tile mat to the bottom, and attaching a handle to the tray, etc., the shelf on the right side does not come off, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: Overall measurement W1200 x H535 x D572 mm inner dimensions on one side (without shelf board) W530 x H430 x D (top plate 560, medium plate 470, lower stage 560) mm top plate thickness 45 mm shelf board thickness 23 mm weight 69.85 kg
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/31 sales price 598,000 yen manufacturer maintenance completed! A famous machine loaded with excellent phono amplifiers. This is a good quality control amplifier that allows you to hear clean, transparent sound. There are only top quality models, and the thickness and luster of the sound will not fade even after nearly 30 years have passed. The exterior has dullness and small scratches, and there are noticeable abrasions on the left side. Serial A2X643 (Takahashi Nobuyuki)
Maintenance information: 2024.5.31 Maintained (capacitor replacement logo, lamp replacement, each switch, input/output terminal contact cleaning, DC offset voltage readjustment of each amplifier, internal and external cleaning functions, performance check, pressure resistance, safety check)
Accessories: none
Main specifications: input terminal/RCA5 system, XLR2 system, tape input/output terminal 2 system, PHONO input 2 system pre-out/RCA2 system, XLR2 system W468 x H171 x D415 mm 25.1 kg
Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of all ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance (TR in the EX Pander board, Tr replacement in the headphone board, operation check, connector caulking cleaning, solder processing) maintained (flat cable replacement, each SW and 2023.3.30 and VOL cleaning, RCA cleaning ※ internal capacitor, lamp, cable replacement (made by another company) IC replacement operation check gap cannot be completely removed) 2022.9.29 Maintained (switch, volume contact cleaning, flat cable replacement, electrolytic capacitor replacement, panel lamp replacement, power circuit tap change, 100V specification change, each input/output operation check)
Accessories: instruction manual (copy)
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi)
Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish)
Accessories: none
Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
The price has been drastically reduced! 2024/6/1 sales price 148,000 yen A center speaker that develops ELAC's new-generation quality into multi-channel. It can easily handle the latest multi-channel sources that require huge amounts of information from the center channel. The exterior has line scratches on the TW periphery and threads on the top plate. Serial 0614 (Yonejima Satoshi)
Maintenance information: 2024.6.1 sweep check is good
Accessories: saran net
Main specifications: center speaker, 2.5-way bass reflex, efficiency, 89dB, impedance, 4Ω, frequency characteristics, 32 to 50,000 Hz, crossover frequency, 450/2,400 Hz, maximum input, 160 W, W650 x H204 x D314 mm, weight: 14 kg
The price has been reduced! 2024/5/25 sales price 89,800 yen Maintained! CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. The exterior is dull all over, and paint peeling can be seen on the body. Serial 137743 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (damper replaced)
Accessories: No accessories
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
The disposal price has been reduced. Member discounts are not applicable. 2023/12/13 Sales price 138,000 yen Maintenance completed! Newcomb tube mono prime. An output of about 12W is output using a 6V6 output tube. It has an adjustment function for a total of 36 fine phono curves, 6 low frequencies and 6 high frequencies. The stylish look reminiscent of Old Marantz, such as the hood on the back, is irresistible. Since the input terminals are on the bottom, it is necessary to devise how to insert the RCA cable. The standard LEVEL position is M. Adjust the volume with LOUDNESS. SELECTOR's RUMBLE FILTER is valid only for PHONO. ※The hood is fitted very tightly, so it cannot be removed normally. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.12 maintenance completed (earth terminal added to bottom, vacuum tube 6AV6 replacement, 100 μF electrolytic capacitor and lug terminal added to 80/10 μF block capacitor, base leg replacement/HUM ADJ readjusted, vacuum tube socket and RCA jack caulk repair. Operation checked (measured at 11 to 15 W SP: 8 Ω with rated output AC 100 to 117 V).
Accessories: none
Key Specifications: 6V6P.P. Rated output 12 W LINE 3 system, PHONO (MM) 1 speaker compatible impedance 8, 16 ohms, W322 x H112 x D240 mm, 6.8 kg
The disposal price has been reduced. 2024/5/10 sales price 498,000 yen Both inside and outside have been maintained! Crescendo is a speaker system developed by Electri and sold with Altech's approval. This time it's an original original box specification with the 605B mounted on it. You can enjoy the tasteful design unique to vintage speakers and the crisp American sound with good texture and momentum. The exterior is also beautifully finished due to maintenance, but there are repair marks on the net (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior cleaning/touch repair. Network assembly) 2023.9.3 maintained (exterior repair/polishing/clear finish front and rear baffle repair/paint saran net simple cleaning
Unit maintenance (low range side: viscoid adjustment/center adjustment, high frequency side: lead disconnection repair, magnetic circuit rust removal/gap cleaning/center adjustment, terminal contact cleaning) network maintenance (characteristic check, terminal cleaning) unit detachment)
Accessories: none
Main specifications: frequency characteristics 20 to 20,000 Hz, use unit 38 cm, 605B (coaxial type with built-in horn), maximum input 50 W, output sound pressure level 97 dB, crossover frequency 1.6 kHz, impedance 16 Ω
W690×H1018×D485mm
Based on the CS-1000, it is a model that promotes high sound quality and weight reduction. The duralumin machined body and Diamond Like Carbon treatment achieve both a sense of luxury and rigidity (Daiki Goto)
Maintenance information: 2024.6.5 continuity confirmed
Accessories: original box, instruction manual, screws
Main specifications: dead weight 13.7 g
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
※The power supply has been converted to a glasses inlet. Maintained! Head amplifier for Luxman MC cartridges. This head amplifier has no corners and is characterized by a smooth, sit-down sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (GAIN switch disassembly contact polishing, contact grease application after eyelet correction. Transistor replacement for each circuit (DC amplifier, MUTING, power supply). (Running test)
Accessories: power cable
Main specifications: MC type cartridge head amplifier with PASS input impedance/100Ω 20dB/30dB switching W138 x H78 x D305 mm 2.7 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/9 sales price 99,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic, easy-to-read sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8,000 Hz maximum input 40W 8Ω output sound pressure level 101 dB outer diameter W400 × H200 × D350 mm 3.30 kg
2024.4 Maintained! Equipped with Philips CDM4PRO, this player is easy to operate, has plenty of professional features, and excellent durability. It has a higher frequency extension than the A730, and the overall balance from bass to treble is good, and the sound has a solid sense of sound pressure. There is dullness and small scratches all over the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 Maintained (CD mechanical pickup is movable by checking, dismantling, check assembly → reading OK. All other internal parts of the NG part have been replaced. CD disc plate replacement ~ aging test 6 days ~)
Accessories: power cord, instruction manual (copy)
Main specifications: CDM4PRO mechanical analog output 2 systems (RCA/XLR), 1 digital output system (AES), 1 clock system (BNC) W320 x H131 x D355 mm 6.1 kg
※There is no problem with the sound output operation, but the LCD is dark and there are places where the characters disappear, so it is inexpensive. The company's first standalone USB-DAC and headphone amplifier compatible with DSD. This product took out the USB-DAC part of the company's CD player DCD-1500RE and finished as a standalone unit. Not only does it play music, but it also effectively upgrades the sound of movies and games on a PC. The exterior has noticeable scratches on the top plate, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cord
Main specifications: DSD signal sampling frequency 2.8224, 5.6448MHz sampling frequency PCM signal 32, 44.1, 48, 64, 88.2, 96, 176.4, 192 kHz input terminal USB (TypeB) x 1, optical digital input x 2, coaxial digital input x 1 output terminal analog audio output (L/R) x 1, headphone output x 1 (6.3 mm stereo standard jack) dimensions W170 x H57 x D182 mm weight 1.5 kg