※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The price has been reduced. 2024/5/7 sales price 29,800 yen This item is currently sold because dirt, tobacco smell, and feeling of use are conspicuous. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/6 sales price 998,000 yen*The front panel is 20.6L, but it is an upgraded product starting at 20. Maintained! Genuine Harman product. The excellent separation unique to mono and the excellent sense of shading of the sound give off a unique difference, and even large aperture woofers drive well. Also, the slightly sweet, and comfortable sound similar to ML-2L is attractive. It still makes music fans groan. There are scratches and small scratches on the exterior. Serial 666/665 (Sasaki Shota)
Maintenance information: 2024.4.15 Maintained (1 deteriorated transistor has been replaced. Other inspections and adjustments have been made) 2023.7.20 maintained (connector contact between the heat sink board and main board has been corrected. Tr, capacitor and resistor exchange. Part of the board solder is re-soldered. Attach the Fisher plug to the SP cable. (Other inspections and adjustments)
Accessories: copy of instruction manual, power cable, Fisher to SP cable, Remo pin x 2, balance short pin
Main specifications: mono power amplifier effective output 100W (8Ω) input/unbalance (RCA) 1 system, balance (XLR) 1 system, 1 SP terminal system W483 ✕ H210 ✕ D560 mm weight 33 kg/unit
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
※1 bottle only. A full range unit that combines an aluminum alloy HR diaphragm and a pure magnesium ridge dome diaphragm. Compared to conventional paper units, it has a slightly better transparency and microwave feel. The exterior is stained with corn paper, paint marks and scratches on the frame (Satoshi Yonejima)
Maintenance information: 2024.5.6 sweep test is good
Accessories: original box
Main specifications: impedance 4 ohms minimum resonance frequency 72 Hz playback frequency band F0 to 10 kHz output sound pressure level 85.5 dB
Maintained in 2023/7! A control amplifier that inherits the sound of Yamaha's famous C2a. A highly reliable phono equalizer is used, so you can enjoy both MM/MC. It has a clean sound typical of Yamaha, and clarifies the outline of the sound. In addition to dullness and small scratches on the exterior, there are scratches on the front sub-panel and insulator marks on the top plate. Serial E052015SU (Hiroki Aso)
Maintenance information: 2023.7.13 Maintained (PHONO circuit IC/capacitor replacement, main board, soldering, deterioration, all correction, volume type, contact correction, long time sound output check)
Accessories: copy of instruction manual
Main specifications: 3 line inputs, 3 tape terminals, 1 phono input (MM/MC), W438 x H86 x D405 mm, 8.8 kg
※Shipping service. The appeal of the audio maker “Macintosh” of yesteryear, which is still deeply popular, is condensed into this one book! /2011.2.22 issued/published models: AE2/C104/C108/C4P/C8/C8P/C8P/C8S/C11/C20/C22/C26/C285W1/20W2/50W2/50W2/A116/MC30/MC30AMC40/MC50/MC60MC75/MC100/MC225/MC240/MC250/MC275/MC2200/ MC2205/MC2300/MC2505/MC3500 and others Since the photograph is a sample, the actual product may be broken or there may be markings etc.
The price has been drastically reduced! 2024/5/5 sales price 218,000 yen A special edition model commemorating the 70th anniversary of JBL's founding. The latest version that has been refined over the traditional 4312 series. A 12-inch diameter woofer unit equipped with the advanced 4429 is used. It is an all-round speaker with a sense of energy and good range extension. The exterior is dull. Serial 3072/3073 (Yonejima Satoshi)
Maintenance information: 2024.5.5 sweep test is good
Accessories: saran net
Main specifications: 3-way bass reflex type 300mm woofer 125mm mid-range 25mm tweeter impedance 6Ω output sound pressure level 90dB frequency characteristics 44Hz to 40kHz W362 x H597 x D298 mm 25.2 kg
*Currently sold. Woofer edge softened A model developed with an eye on the digital age. The natural spread of sound is suitable not only for vocals, but also for classical music, etc. This is a volume-input high CP model unique to the bubble period. The exterior has a saran net hole, and the emblem is missing on one side and the other side is missing. Also, the veneer is torn. Serial 2609/12502 (Yonejima Satoshi)
Maintenance information: 2024.5.5 maintained (woofer edge softening treatment, good sweep test)
Accessories: saran net
Main specifications: 3 way 3 speakers, sealed, 32 cm for the low range, 10 cm, cone type/2.5 cm for the high range, dome type frequency band 35 Hz to 30 kHz crossover 600 Hz/5 kHz sound pressure level 91 dB impedance 6 Ω dimensions W370 x H680 x D330 mm weight 21 kg/book
Maintained! A popular DENON control amplifier for its excellent phono equalizer. MC head amplifiers are famous for their quality, and they fully draw out the amount of information in the cartridge. It's a neat sound typical of a domestic amplifier with clear yet solid mid-range sound. In addition to the exterior, noticeable scuffs on the top plate, scratches on the VOL dial, and stains on the back of the front flap, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.2.16 Maintained (main volume, balance volume internal contact cleaning, cleaning. All input terminals are polished and cleaned, electrolytic capacitor replaced, PHONO2 impedance changeover switch disassembly, contact polishing, cleaning, and grease is applied. (Check the operation of each input/output)
Accessories: instruction manual (copy)
Main specifications: CR equalizer with 3 PHONO inputs MC head amplifier W455 x H132 x D357 mm 10.5 kg
Mini plug cable 1.5m stereo mini plug to stereo mini plug Stable high sound quality can be ensured with a high purity 99.996% OFC oxygen-free copper cable. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: original box
The price has been drastically reduced. 2024/5/5 sales price 22,000 yen. ※Since there is a lot of deterioration in the exterior, it is inexpensive. A popular DIATONE bookshelf. Metallic sounds such as wind instruments and hi-hats on drums resonate comfortably in the crisp high range, and the low frequencies are more powerful than their size. In addition to the exterior, there are many peeling veneers, and a feeling of use such as dullness, abrasions, and scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: saran net
Main specifications: 2-way speaker, bookshelf type, bass reflex, efficiency 89dB, impedance, 6Ω, size, W212 x H349 x D220 mm, weight 7 kg
The price has been drastically reduced. 2024/5/26 sales price 278,000 yen Maintenance and cabinet repair completed! This is a full set that combines 33 QUAD original transistor preamps and 303 power amplifiers with tuner FM3. Comes with a wood case that allows 33 and FM3 to be built in parallel. The impression is that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier (Oikawa Tetsuji)
Maintenance information: 2024.5.4 maintained (internal check, power supply, filter C, HPX circuit C, etc., there are many differences in capacity → replacement f cover misalignment → readjust, tuning indicator lamp back change, DIN SP-RCA female cable damaged → created)
Accessories: power cable, connection cable (2 types: DIN-RCA and DIN-DIN types), copy of the instruction manual, FM coaxial connector
Main specifications: external dimensions W550 x H113 x D220 mm, weight approx. 7.0 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
Maintained! A D/A converter that was said to be close to analog sound. The high frequencies are tightened, the mid and low frequencies are mild, and the sound feels powerful with a sense of directness. The high cost performance also shines (Sasaki Shota)
Maintenance information: 2024.5.4 maintained (21 replaced due to electrolyte condenser fluid leakage, electrolyte cleaning, pattern and solder correction, insulation washer replacement due to damage, sound and HDCD recognition checks on each input/output)
Accessories: manual, power cable
Main specifications: Input terminal/1 coaxial system, 1 optical system, ST link 1 analog output system (RCA) HDCD compatible D/A conversion chip using a multi-bit Barbrown PCM63P-K type W430 x H60 x D230 mm 4 kg
※Since it is cheap, it is currently sold. This is a thin center speaker. Since it has an anti-magnetic design, this model is easy to use and easy to combine with other speakers. Recommended for those who are building surround sound for the first time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual, connection cord, original box
Main specifications: 2 way, 3 speakers, bass reflex system, center type, anti-magnetic design, playback frequency band 60 Hz to 20 kHz, 88 dB, 6 ohms, allowable input, 40 W, W435 x H100 x D221 mm, 2.2 kg
Sound output has been confirmed, and since it is inexpensive, it is currently sold. This speaker was designed for the company's FR-N Hi-MD components. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: W167 x H290 x D230 mm 3.9 kg (actual measurement)
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
Oxygen-free copper (OFC) is used as the untreated conductor at the 6.0 m end of the speaker cable, and the 4-core structure reduces radiation noise. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
The price has been drastically reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
※Since the cantilever is large and tilts to the right, it is inexpensive. Needle cover missing. The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments. There is a feeling of use on the exterior, such as dullness and scratches on the body (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output
Accessories: case
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
※It is inexpensive because there are creases on the saran net and veneer. A cost-effective bookshelf speaker from CELECTION in the UK. The large but well-organized and smooth sound quality makes you feel the sense unique to CELETION. The luster of the strings and vocals is remarkable. As for the exterior, there are creases and shrinkage on the decorative sheet. Serial 435666, 435678 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers impedance 8 ohms output sound pressure level 86 db size W185 x H310 x D 215 mm weight 5 kg
Comes with a special bracket. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Serial 9020409, 9020410 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: special bracket, saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Comes with a magazine! A full-range unit from Stereo magazine's 2016/8 appendix. Uses Fostex's first aluminum cone diaphragm and center cap. It features good sounding and sharpness. (FUJISAWA KOSHI)
Maintenance information: 2024.5.2 operation confirmed
Accessories: gasket, magazine (original box)
Main specifications: 8cm full range unit impedance 8 ohms minimum resonance frequency 105 Hz sound pressure level 82.5 dB
The 2.1 m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
The power cable uses DIP FORMING oxygen-free copper wire with HSE treatment, which is an advanced burn-in treatment, applied to the 1.8 m conductor. The S/N is extremely high, and the strong sound in the low range is also an extremely attractive, high cost performance model. There is a film defect on part of the sheath (Kojima Yosuke)
Accessories: none
The price has been reduced. 2024/4/29 sales price 13,000 yen. ※Operation has been confirmed, but since it is cheap, it will be handed over as is. It is a high-resolution DAC equipped with the high sound quality DAC PCM1794A from TI's audio IC brand Burr-Brown. By using it between a PC and audio, high-resolution playback on a PC is possible, and it delivers powerful and precise sound (Kobayashi Hitoshi)
Maintenance information: 2024.4.27 Operation confirmed
Accessories: power cable
Main Specifications: Format: PCM [USB] maximum 24 bit 96 kHz [optical/coaxial digital input] maximum 24 bit/192 kHz digital input [3 systems] USB TypeB terminal/optical digital audio input (square type) coaxial digital audio input SNR: 109 dB dynamic range: 110 dB total harmonic distortion: 0.004% or less (20Hz-20kHz) DAC IC: Texas Instruments Burr- Brown PCM1794A compatible OS: Windows 10/8 (8.1) 7/Vista/XP/2000/macOS X/9.1 or later
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
The price has been reduced. 2024/4/26 sales price 12,800 yen. This is a rare KEF center speaker Q6C in stock. It is a well-balanced and well-organized sound character typical of the Q series. It seems to express a sufficient sense of sound field even when used in combination with Q1 for theaters. There is a bruise on the upper back corner. Serial 2027685G (Murakoshi Yoichi)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: jumper plate, saran net
Main specifications: 2-way bass reflex low range/130mm Uni-Q high range/19mm Luminiumdome frequency characteristics 50Hz-27kHz crossover frequency 2.8kHz 89dB 8Ω W432xH160xD215mm 4.1 kg
The price has been drastically reduced. 2024/4/25 sales price 448,000 yen Maintenance is being carried out in 2020. It's a famous machine you can't miss when talking about Marantz sounds of yesteryear. It has a good mid-range fat transfer, and its pleasant sound is an appeal that cannot be obtained anywhere else. You can enjoy the Marantz sounds of the good times. There is some rust and small scratches on the exterior. Serial 8-4160 (Murakoshi Yoichi)
Maintenance information: 2020.11.18 maintained (AC code deterioration replacement, 40/40/20 μF and other deterioration replacement, 3 external paint, 20 μF x 2 deterioration replacement, selenium deterioration countermeasures → diode addition · vacuum tube 6BH6 noise exchange · vacuum tube socket and RCA jack caulking repair ※ other operation checked (measured at 32 to 41 W SP: 8 Ω with rated output AC 100 to 117 V) *A2 The EL34 vacuum tube guide pin is broken, but there is no problem with performance. (Part of the SP terminal on the right channel is missing.)
Accessories: instruction manual (for replicas, Japanese copy)
Main specifications: 35W+35W vacuum tube 6CG7/6BH6/EL34 W348 × H191 × D273mm 22.5 kg
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/23 sales price 99,800 yen, genuine Rin Japan product. A network audio player. It has a simple and modern European design, so you can enjoy a bright sound without getting tired of listening. Not only is it compatible with the LINN system, but it is also equipped with digital output and variable line level output functions not found in the KLIMAX DS and AKURATE DS. There is a thin scratch on the top plate. ※The display is slightly dark, but this is the current situation. Serial 1255165 (Fujisawa Yukishi)
Maintenance information: 2024.4.23 Operation confirmed (Ver. 4.104.518)
Accessories: remote control, power cord
Main specifications: Compatible sampling frequencies 44.1K, 48K, 88.2K, 96K, 176.4K, 192K compatible bits 16-24 bits, output terminals RCA phono (fixed/variable line level output), RCA phono coaxial (digital output) W381 x D360 x H80 mm 4 kg
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
Internally and externally maintained! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has been beautifully finished due to exterior maintenance. Serial 011093 016017 (Tomonori Asaine)
Maintenance information: 2024.4.18 Maintained (exterior repair/polishing/oil finish front and rear baffle/hakama repair/paint saran frame reinforcement painting/net replacement, batch polishing unit maintenance (high frequency magnetic circuit/in-gap cleaning/center adjustment diaphragm gap indirect attachment) ATT cleaning unit detachable)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
Maintained by the manufacturer! This model was the first to use an ALPHA processor in the best-selling 1650 series. The mid and low frequencies are quite stable, and the balance depicts rich, rich music regardless of genre. The exterior has dents on the front panel corner, and there are line scratches, small scratches, dullness, etc. ※The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.17 manufacturer maintained (inside the CD mechanism, loading belt, tray opening/closing SW replacement. VR has been reworked. The HF waveform of the laser pickup is within the regulations and is currently fine. Sound output test)
Accessories: copy of instruction manual ※ remote control missing
Main specifications: Real 20-bit 4DAC/Lambda Super Linear Converter with 20-bit 8x oversampling digital filter+GIC 3rd order analog filter frequency characteristics 2Hz to 20kHz W434 x H120 x D340 mm 10.2 kg
Maintained. The grain of the sound is clear and the smoothness of the connection has also been improved. This is a 1200 Hz crossover network ideal for the combination of a 38 cm woofer and 1 inch driver. The exterior has dullness and scratches due to use over time, serial 18254 18275 (Asaine Satoshi Law)
Maintenance Information: 2024.4.16 Maintained (Screws, Insulated Washer Parts Replacement Switch Contact Cleaning)
Accessories: none
Key Specifications: Crossover 1200 Hz 8 Ohm 3 Position Switch with Level Control
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an untreated 1.0 m pair end. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none