*The remote control is out of stock, so it is cheap and is currently sold. An entry model with excellent cost performance. Since it comes with a phono circuit, you can also enjoy records. The sound quality is stable in both digital and analog. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 50W+50W (8Ω) line input 4 phono 1 system (MM) with pre-out terminal W434 x H121 x D308 mm 7.1 kg
Comes with original box This is the third headphone in the Hifiman sealed series. Inheriting the traditional goodness of the classic model SUNDARA, it has achieved a large sound field that looks like an open type while being sealed. I have the impression that it mellows down from low to high frequencies. It is in good condition with little feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: original box, connection cable
Main specifications: sealed type 20Ω 98dB 432g
The price has been drastically reduced! 2024/5/27 sales price 398,000 yen A popular model equipped with a diamond tweeter that rewrote the history of the 800 series. The color is rose. The excellent stretch that penetrates the high range without habit and the sense of volume in the mid to low range, which has a strong presence, are appealing not found in the current D3. The exterior has dullness, small scratches, and stickiness on the bass reflex. Serial 0012701 0012702 (Asaine Tomoho)
Maintenance information: 2024.5.27 sound output confirmed
Accessories: saran net jumper cable
Main specifications: 2 way 2 speakers bass reflex diamond dome tweeter 8 ohm crossover 4 kHz frequency characteristics 42 to 33 kHz W238 x H418 x D351 mm 12 kg
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
Refresh yourself with interior and exterior maintenance! A gray-finish model of the king monitor 4343B. The balance between thick, strong mids and responsive bass is perfect. A model that wants to make jazz and rock sound thick, thick, and powerful. It's a lot of exhilarating noises. The exterior has been beautifully finished due to maintenance (Tomoho Asaine)
Maintenance information: 2024.5.27 Maintained (exterior repair/all coated saran frame processing correction repair/net replacement, plate maintenance repair, plate maintenance (edge replacement, cone paper coating, center cap replacement)) midmaintenance (edge replacement, cone paper coating, center cap replacement, driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) Tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement, exterior painting) horn painting, diffuser repair/painting, baffle plate cleaning unit detachable network maintenance: frequency characteristic check, ATT cleaning, switching SW/terminal cleaning/screw replacement)
Accessories: diffuser saran net
Main specifications: 4 way 4 speaker bass reflex crossover 300 Hz/1,250 Hz/9,500 Hz impedance 8 Ω 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg/1
The price has been reduced! 2024/5/27 sales price 748,000 yen, beautiful item with original box, first arrival at Hi-Fi! A belt drive analog player equipped with a completely original tone arm and extreme performance. The combination of a newly developed original tone arm with extremely high initial motion sensitivity using knife-edge bearings, a quiet DC motor supported by a powerful power source, and a belt drive system brings an emotional playback sound with high fidelity. The exterior is generally good. Serial M30500158 (Tomonori Asaine)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: original box, instruction manual, handle, hex wrench, power cable, phono cable, EP adapter
Main specifications: belt drive system, rotation speed 33/45/78, switchable platter mass 5.2 kg, tone arm type, static balance, S-shaped universal type, knife edge structure, effective length 256 mm, overhang 16 mm, compatible cartridge 4 to 11 g (17 to 24 g with attached headshell), height adjustment range 22 g, anti-skating 0 to 4 g, power supply voltage AC100V (50/60 Hz) power consumption 5W external dimensions W491 x H128 mm (from bottom to top of turntable) x D399 mm mass 24.8 kg (main body)
Denon high-end MC cartridges in the heyday of analog, using amorphous boron pipes. A sound with a wide range and good separation, which has a different trend from the standard 103 series. This is the reference cartridge at the time. There is slight dirt and a feeling of use. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, needle cover
Main specifications: MC type output 0.2 mV 40 ohm boron cantilever solid diamond special oval needle playback band 20 to 75 kHz proper needle pressure 1.0 to 1.4 g dead weight 5.8 g
The higher model of the DL-103. Wide range was measured, and 20 Hz to 70 kHz was achieved. Delicate, wide, and powerful sound quality. There is slight dirt and a feeling of use. ※There is a note on the original box. (FUJISAWA KOSHI)
Maintenance information: 2024.5.27 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output 0.2 mV playback frequency 20 to 70,000 Hz impedance 40 ohms needle pressure 1.2 g dead weight 6.5 g
Fully maintained! 2-way floor speaker with a double woofer and 1 horn. With the benefit of the 2234H woofer, which has a fast response and is highly efficient, I have the impression that it is very easy to sound even though it is a double woofer. Coupled with the excellent penetration of the biladial horn, it develops a very energetic sound stage. The good positioning unique to 2WAY is also a good impression. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (exterior repair/polishing/oil finish front and rear baffle/hakama/horn coating, saran net replacement driver maintenance: magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, terminal cleaning/screw replacement unit detachment)
2023.12 Edge replaced
Accessories: none
Main specifications: 2 way 3 speaker bass reflex type [unit used] 38cm woofer/2234H x 2 driver/2421A+ biladial horn/2344 frequency characteristics 30Hz-16kHz impedance 8Ω sound pressure level 96dB allowable input 375W crossover frequency 1,000 Hz (30Hz to 1kHz on one side, 100Hz or less on the other) Dimensions W965 x H908 × D515mm weight 114 kg/1 bottle
Full maintenance from each unit to network and exterior! This is a 4343BWX with blue baffles and walnut specifications. The instantaneous power, sharp treble, volume and dynamism of the bass are outstanding. It's one step ahead of current speakers in terms of localization, but it's rare to find a speaker that makes on-mic recordings of all ages sound better than this. It has a beautiful finish due to exterior maintenance (Oikawa Tetsuji)
Maintenance information: 2024.5.27 Maintained (exterior repair/polishing/oil finish baffle repair/paint saran net repair/frame repair: edge replacement, cone paper coating, in-gap cleaning/center adjustment midmaintenance: edge replacement/cone paper coating driver maintenance: magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement Tweeter maintenance: magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement network maintenance: frequency characteristic check, ATT/switching SW cleaning, partial defective resistance/capacitor replacement unit detachment/diffuser repair)
Accessories: none
Main specifications: 4-way monitor speaker bass reflex playback frequency band 35 Hz to 20 kHz (+- 3 dB) crossover frequency 300 Hz/1250 Hz/9500 Hz impedance 8 Ω output sound pressure level 93 dB dimensions W635 x H1,051 x D435 mm weight 83.9 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/27 sales price 248,000 yen maintenance completed! Genuine Electri 7CH high power multi amplifier Power amplifiers featuring high power of 200W each. Not only can it be used for AV surround and multiple amplifiers, but it can also be enjoyed as a normal power amplifier with sufficient driving power. The American sound is straight and has high instantaneous power. The exterior has noticeable line scratches and dullness on the front (Oikawa Tetsuji)
Maintenance information: 2024.5.27 maintained (card edge contact cleaning, excessive reviver cleaning, removal, disassembly, polishing, and resistance value check, mounting solder correction) 2022.11.4 maintenance completed (all amplifier board removal, card edge contact cleaning input and operation mode changeover switch cleaning FAN cleaning bias and offset check. (BTL mode check for each channel RCA and XLR input/output audio check)
Accessories: manual, power cable
Main specifications: each channel 200W/8Ω W440×H144×D483mm 25.4 kg
Beautiful item with original box! Equipped with a new amplifier circuit “LIFES Version 1.0,” the grain of the sound and sense of realism have become even more prominent while retaining the natural and gentle sound of the old model. They seem to handle all genres flawlessly. The appearance is good with little feeling of use. Serial G20800253A (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: remote control instruction manual, power cord, original box
Main specifications: rated output 110W+110W (8Ω) 220W+220W (4Ω) input sensitivity/input impedance PHONO (MM) 2.5mV/47kΩ, PHONO (MC) 0.3mV/100Ω, LINE 180mV/47kΩ, BAL.LINE 1
80 mV/79 kΩ, frequency characteristics PHONO 20 Hz to 20 kHz (within ± 0.5 dB) LINE 20 Hz to 100 kHz (within -3.0 dB) W440 × H178 × D454 mm 25.4 kg
The price has been drastically reduced! 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tone arm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
※It is inexpensive because it is in poor condition, such as rust. Maintained! A vintage Lux Premain model. The 75W yet firm, extruded bass and thick, mild mid-high sound are lackstones themselves. Enjoy playing records with a tasteful sound. The exterior is serial 2503734 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (main amplifier circuit board solder correction. Switch and volume contacts corrected. Panel lamp replacement Output relay replacement. (I/O pin jack polish)
Accessories: No accessories
Main specifications: 75W+75W phono 1 system (MM/MC switching) line 2 tape systems, 2 tape systems, pre/power separable, W453 x H135 x D425 mm 13 kg
The price has been reduced. 2024/5/26 sales price 228,000 yen 2023/10 manufacturer maintenance completed! The flagship stereo power amplifier model with a KT120 push-pull configuration by Sun Valley. An output transformer with a bifiler-wound custom-made by Hashimoto Electric is used. It achieves both a wide range of sound that is pleasant to listen to. This is a powerful power amplifier that can make even vintage speakers sound with modern speakers. The exterior is dull (Hiura Katsuji)
Maintenance information: 2023.10.20 manufacturer maintenance (PT replacement with a brand new product, carrying out energization after returning the remodeled point to a normal state, measurement of voltage of each part and measurement of various characteristics, music playback test)
Accessories: power cable
Main specifications: used vacuum tube KT120 push-pull 55W+55W KT120 x 4 (TUNG-SOL), 12BH7A x 4 (ELECTRO HARMONICS), CV4003 x 2 W400 x H380 x D220 mm 32 kg
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg
Accuphase's dedicated analog disc input board. Using the latest circuitry and selected high-quality sound materials, extremely low noise and high-accuracy RIAA deviations have been achieved. The optimal impedance can be selected from 30/100/300 ohms during MC. It is also equipped with a subsonic filter, so you can enjoy an even higher grade analog sound than the AD-30 (Kojima Yosuke)
Accessories: instruction manual, original box
Main specifications: [MM] gain 40dB, input impedance 47kΩ [MC] gain 66dB, input impedance 30/100/300Ω switching [compatible models] C-2000, C-2110, C-2120, C-245, C-265, CX-260, E-211, E-212, E-213, E-250, E-260, E-270, E-306V, E-307, E-308, E-350, E-360, E-370, E-406 ・E-407 ・E-408 ・E-450 ・E-460 ・E-470 ・E-530 ・E-550 ・E-560 ・E-600 ・E-650
The price has been drastically reduced! 2024/5/25 sales price 698,000 yen AccuPhase 40th anniversary SACD/CD transport. In-house one-lens/twin pickup high-speed access mechanism and ultra-heavyweight design chassis structure. It has an even richer sense of scale than the previous 800, and the high sound quality of delicate and precise music is attractive. It allows you to relax and enjoy a variety of sauces. There are a few small scratches on the exterior. Serial K2Y319 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: remote control, instruction manual, connection cable, power cable (general purpose)
Main specifications: twin pickup high speed access mechanism connection terminal HS-LINK coaxial terminal dimensions W477 x H156 x D394 mm weight 30 kg
The price has been drastically reduced! 2024/5/25 sales price 1,180,000 yen This is a popular piano black model. I am overwhelmed by the range and depth. The piano trio is a versatile player who swings lightly and sounds softly with a delicate vocal system. The 800 series boasts such high performance that many audio manufacturers use as a standard for determining sound. The exterior is good with no conspicuous scratches. Serial 1605 0003931 FP37486/1605 0003932 FP37496 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep check OK
Accessories: instruction manual, spike, rubber foot, cloth, jumper cable
Main specifications: 25 mm diameter tweeter x 1 130 mm diameter mid x 1 165 mm diameter woofer x 2 frequency band 20 Hz to 35 kHz efficiency 89 dB impedance 8 ohms W238 x H1,019 x 345 mm 33 kg/1
The price has been reduced! 2024/5/25 sales price 69,800 yen ※The exterior is in poor condition, so it's cheap. An upgraded model of PMC's small monitor DB1. It has excellent characteristics as a near-field monitor, and is characterized by good phase characteristics and rich spatial expression. It is a high-quality model that can be further upgraded by adding an amplifier. There are line scratches and bumps on the exterior. Also, there are cracks or tears in the urethane on the back. Serial 012503/012504 (Yonejima Satoshi)
Maintenance information: 2024.5.25 sweep test good
Accessories: saran net
Main specifications: 2 way 2 speakers, frequency characteristics, 50 Hz to 25 kHz, output sound pressure level, 87 dB, impedance, 8 ohms, dimensions: H290 x W155 x D240 mm (including grille), mass: 4.5 kg
The price has been reduced! 2024/5/25 sales price 89,800 yen Maintained! CG25D is a staple mono needle and is the highest peak. The precise, thick, and thick sound brings out a unique sense of density that is different from stereo needles. The exterior is dull all over, and paint peeling can be seen on the body. Serial 137743 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (damper replaced)
Accessories: No accessories
Main specifications: mono round needle, MC type, output voltage: 1.5 mV, proper needle pressure: 3.5 g, dead weight: 32 g
Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (contact cleaning due to poor main volume and balance volume. Due to poor contact with the compensation center switch in the sealing door, disassembly contact polishing contact grease was applied. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL))
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
※Since it is a commercial device, there is no problem with the as-is operation, but since there is no guarantee, it is inexpensive. The sound quality is clean, fresh, and light, and the sound is firm and crisp. The sound development is such that the image that comes to mind when using the word YAMAHA for commercial use fits perfectly. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: stereo output 105W+105W (4Ω) 100W+100W (8Ω) bridge output 210W (8Ω) frequency characteristics 20Hz-50kHz damping factor 200 input terminal XLR, phone, output terminal 5WAY binding post power consumption 150W W480 x H880 x D456mm 12 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/5/25 sales price 248,000 yen It now uses Alnico, which can be called premium, and the tuning that emphasizes musicality that is comfortable to listen to throughout the entire area makes a good impression. The visuals are also compact and elegant, and have a sense of luxury. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net, jumper cable
Main specifications: 2WAY sealed 35mm pure silk ring diaphragm tweeter 170mm Kurt Mueller cone woofer rated input 50W maximum input 150W output sound pressure level 87dB impedance 6Ω crossover 3,500 Hz playback band 40 to 50,000 Hz W224 x H380 x D319 mm 10.8 kg
*Remote control is out of stock. Maintained! Onkyo's unique supercurrent amplifier configuration is used for the power section, and the smooth sound is impressive with a circuit that combines a MOS FET and a bipolar transistor. The sense of power in the low frequencies and the extension in the high frequencies play a slightly different sound from the others. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Maintenance completed (switch disassembly, contact polishing, contact cleaner application. Soldering correction for each circuit board)
Accessories: instruction manual
Main specifications: 80W+80W (8Ω) W455 × H170 × D430 mm 17 kg
The price has been reduced. 2024/5/25 sales price 29,800 yen. ※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback)
Accessories: instruction manual, gasket
Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
The price has been drastically reduced! 2024/5/25 sales price 148,000 yen This speaker has acquired wideband playback and high dynamic range. Equipped with a special tweeter Emit-B that fits in the high range, it achieves high frequency reproduction over 45 kHz and a clean, tight low frequency response. The exterior is dull and has small scratches, broken dowels on the saran net, and some repair marks remain on the woofer center cap. Serial 03144 03972 (Tomonori Asae)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: Saran net jumper cable (general purpose product) spike
Main specifications: frequency characteristics 30 Hz to 45 kHz ± 2 dB crossover frequency 250 Hz, 800 Hz, 3.5 kHz sensitivity 89dB/2.8V/1m input impedance 4Ω recommended amplifier output 50W to 400W external dimensions W430xH1,480xD430 mm weight 59 kg
A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The price has been drastically reduced. 2024/5/24 sales price 248,000 yen Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. There are repair marks on the edge (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained (voice coil, grommet, tinsel, and connection terminal parts were polished, connected with aluminum solder, and improved contact. Edge crack repair)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
The price has been drastically reduced! 2024/5/23 sales price 198,000 yen ※This is a record player with Garrard 401 and Technica AT-1503/3 mounted on a 50Hz double arm cabinet. The powerful, thick, and energetic sound unique to rim drives is attractive, and you can enjoy the rich sound typical of analog. The exterior has peeling, scratches, erased characters, scratches, etc. Serial 42640 (Tamura Eiji)
Maintenance information: 2024.5.23 Maintained (dirt cleaning. Motor disassembly, inspection, lubrication and assembly. Motor spring rubber sleeve replacement. AC cord replacement Main bearing disassembly, bearing thrust replacement, lubrication, oil sealant application, assembly. idler cleaning. Speed adjustment linkage adjustment. brake adjustment. Oil felt replacement. Mounting stud bolts missing/added; nuts, metal washers, and rubber washers added. Running tests OK. (*There is a slight loud noise when turning in the opposite direction, but this is the current situation)
Accessories: No accessories
Main specifications: 50 Hz specification idler drive 33/45/78 rotation arm part: static balance type execution length 257 mm compatible cartridge 13.5 to 33 g (including shell) needle pressure range 0 to 3 g W540 x H180 x D640 mm
Pickering's classic headshell. The aluminum press finish has just the right amount of sound. The overhang is adjustable, and the wide mounting width makes this model easy to use. There is a slight screw scratch. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
Main specifications: aluminum stamping weight 8.2 g
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Maintained! Comes with a remote control. This model was created by gathering the know-how of the Integra series. There are only models produced with a thorough emphasis on sound quality, which is a bit different from other Integra series, and has a relaxed, relaxed sound. The exterior has dullness, threads, and small scratches. Also, the SP terminal has been replaced. Serial 6301012428 (Yonejima Satoshi)
Maintenance information: 2024.5.22 Maintained (disassemble the push switch and remote wire switch, polish the contacts, and apply contact cleaner. Volume contact correction. Remote control operation check OK)
Accessories: remote control, instruction manual
Main specifications: 155W+155W (6Ω) 120W+120W (8Ω) damping factor 400 (8Ω) frequency characteristics 2Hz to 100kHz W471 ✕ H170 ✕ D430 mm 26.6 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/21 sales price 1,398,000 yen B&W 40th anniversary limited model of 500 units. Color white. Not only are diamond tweeters that reproduce extremely clear and transparent high frequencies, but their ability to reproduce well-balanced low frequencies is also attractive. The localization is also clear throughout the entire area, and classical music and vocals are reproduced with high quality. There is a line scratch on the base part on one side, a slight thread on the TW dome (no dents), and dents on the grill edge. Serial 0003431,0003432 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 operation confirmed
Accessories: instruction manual, spike, rubber foot, jumper cable
Main specifications: 2-way bass reflex playback frequency band 32 Hz to 33 kHz impedance 8 ohms crossover frequency 3.8 kHz output sound pressure level 88 dB W230 x H930 x D375 mm 25 kg
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/20 sales price 348,000 yen ※The center cap has many wrinkles, so it's cheap. Woofer edge softening treatment! Comes with a dedicated stand DK-10000 sold separately. Diamond Tone 40th anniversary model DS-10000 klavier. A limited-edition model of 300 sets created by infusing all the sensibility of the company's engineers into a beautiful piano finish reminiscent of crafts. It is a masterpiece that pursues even the smallest sounds one by one. In addition to dullness and scratches on the exterior, there is a feeling of use such as dents on the scoker cover. Serial 13467 13468 (Hiroki Aso)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: dedicated stand (DK-10000)
Main specifications: 3-way 3-speaker sealed bookshelf type usage unit/27cm aramid honeycomb curved cone type, 5.0 cm boron D.u.d. dome type, 2.3 cm boron D.U.d. dome type, 6Ω 35 Hz to 60000 Hz crossover 600 Hz/5000 Hz dimensions W360 x H625 x D290 mm weight 27 kg