Add search
6 results
Manufacture | Model/Title | Price | Arrival date
STEREO SOUND NO.058 1981 SPRING/ステレオサウンド 58号
Price: JPY 1,818
雑誌・書籍1000円以上で送料無料
Arrival: 2020-07-08 13:23:51
description
※Shipping service. No. 58 Special Feature = 3rd “THE STATE OF THE ART: Supreme Component” Award Selection/New JBL 4345 Detailed Report/EMT927 vs. Torrance Reference/Listen to the Tannoy SRM Series/Infinity “IRS” Anatomy/1981.4.15 issued. Posted models: JBL/4345BWX MCINTOSH/MC2500 VICTOR/TT-801, CL-P10, TS-1 MICRO/SX-8000, HS-80 ONKYO/INTEGRA P-309, INTEGRA M-509 MARK LEVINSON/ML-6AL AUDI-Technica/AT-34E11 ENTRE/EC-30 SME/3012-R SPECIAL TECHNICS/EPC-C100CMK3 FIDELTY RESEARCH/XF-1 SELLESION/DITTON300 KEF/MODEL105.4 KENWOOD/L-08C, L-08M PIONEER/A-980 SANSUI/AU-D907F SONY/TA-AX8 LO-D/TU-1000 LUXMAN/PD300 ADC/ASTRION LINN/ASAK/ S56.4.15 issued. The photograph is a sample, so the actual product may be broken, or there may be markings etc.

930stGermany

24-42757-09740-00
930st
Manufacture:EMT
Original price: JPY 1,258,000
Price: JPY 889,091
Germany
Arrival: 2024-06-02 20:08:23
description
The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Phonoiko is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment (Running test OK) Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA) Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms

MCH-2Switzerland

Ask 24-43139-12875-00
MCH-2
Manufacture:THORENS
Original price: JPY 140,000
Price: JPY 107,273
Switzerland 1981 made
Arrival: 2024-06-13 20:03:09
description
Comes with original box! It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi) Maintenance information: 2024.6.12 sound output confirmed Accessories: original box Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g

XSD-15Germany

Ask 24-43139-12876-00
XSD-15
Manufacture:EMT
Original price: JPY 190,000
Price: JPY 90,727
Germany
Arrival: 2024-06-13 20:03:14
description
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi) Maintenance information: 2024.6.12 sound output confirmed Accessories: original box, characteristic table Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g

XSD-15Germany

Ask 24-43139-12874-00
XSD-15
Manufacture:EMT
Original price: JPY 190,000
Price: JPY 90,727
Germany
Arrival: 2024-06-14 19:14:28
description
A universal model that can be used with standard tone arms. A long-time seller where you can feel the vividness of the studio atmosphere of each era and even the heat of the performance. You can enjoy a thick and powerful sound (Murakoshi Yoichi) Maintenance information: 2024.6.12 sound output confirmed Accessories: original box Main specifications: MC type needle pressure 2.5 g impedance 22 ohms own weight 17.6 g

MCH-2Switzerland

Ask 24-43139-12873-00
MCH-2
Manufacture:THORENS
Original price: JPY 140,000
Price: JPY 107,273
Switzerland 1981 made
Arrival: 2024-06-14 19:14:32
description
※The cantilever is slightly tilted to the right. It is a universal specification that can be used with normal arms. Tuned based on EMT professional cartridges. A Vandenhall stylus is used. The sharp low range and the thick, powerful mid-high range are attractive (Murakoshi Yoichi) Maintenance information: 2024.6.12 sound output confirmed Accessories: none Main specifications: output voltage 0.15 mV (1 cm/sec 1 kHz) needle pressure 2.0 to 3.0 g playback frequency band 15 to 25,000 Hz channel separation 25 dB compliance 15 x 10-6 cm/dyne internal impedance 24 Ω needle tip super oval dead weight 17.5 g
6 results
UsedUsed
ConsignedConsigned
HoldHold
ReservedReserved
Sold OutSold Out