Unspecified speaker stand. It's the size of JBL4312 and DIATONE's DS-77 class. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate W340 x D245 mm overall W380 x H437 x D340 mm 6.2 kg (actual measurement)
Currently sold. An affordable theater speaker with a round finish. A tall boy with 4 ways that are more luxurious than the price. It is a cost-effective speaker that can be easily used for TVs and subs. In addition to the exterior and damage to the dowels on the saran net, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net, instruction manual
Main specifications: 3-way 4-speaker bass reflex type maximum input 120W rated input 60W playback frequency band 36Hz to 25kHz 8Ω output sound pressure level 85dB W225 x H900 x D313 mm 15.6 kg
※ There is no problem with operation, but since it is cheap, it is currently sold. Panasonic CD player. A CD player that uses a MASH 1-bit DAC and a unique swing arm mechanism. It's a natural sound with no quirks, so you can enjoy it in a wide range of genres. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 2 Hz to 20 kHz W430 × H130 × D333 mm 5.2 kg
*Currently sold. Bose's classic full range speaker. This model has a reputation for its well-organized and punchy sound quality. It can be used for a wide range of purposes, from subsystems to surround use. The exterior has a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: full range unit, 6Ω output, sound pressure level 88dB, magnetic-proof type, W270 x H168 x D180 mm, 4k g/unit, MS-2 size, W230 x H47 x D200 mm, 0.65 kg
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
※Accessories such as spikes are missing, so it's cheap. A stand designed for the company's 705 and CM1 bookshelf speakers. It will also fit similar sized third-party speakers. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: top plate size 160 x 220 mm W278 x H595 x D368 mm 10 kg/bottle
Maintained! Standard model of 120V commercial power amplifier. It's high watt and can be played with plenty of room even with large speakers. Even though it's for commercial use, there is little coloring and the feeling that the sound flies straight through is very appealing. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance completed (replacement of C and IC etc. within the board, VOL cleaning*Please narrow down the VOL when the power is off)
Accessories: none
Main specifications: 155W+155W (8Ω) SNR 110dB W457 x D254 x H209 mm 18.1 kg
NEW GENERATION LUXMAN A CLASS POWER AMPLIFIER! In addition to the warm sound quality unique to Class A, the range is wide and driving power is sufficient. It has resolution and instantaneous power compatible with the latest speakers, and can easily drive even large speakers. It goes well with recent European speakers. The exterior has line scratches on the upper center of the front and top plate, and several scratches on the upper front corner and upper back corner (Kanai Hidetsugu)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: instruction manual, power cord
Main specifications: 60W+60W (8Ω) BLT240W (8Ω) W440 × H230 × D480 mm weight 47.0 kg
The price has been drastically reduced. 2024/5/30 sales price 128,000 yen Maintained! This is a Dynaco tubular control amplifier. It is an amplifier where you can enjoy the warm and comfortable sound unique to vintage. While the microwave feel is moderate, the nostalgic sound with an emphasis on atmosphere has a unique, hard-to-get flavor. There is a feeling of use such as rust stains on the top and sides, and rust etc. on the knobs (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (12AX7, 2000 μF electrolytic capacitor, 1 μF replacement, 1/4 W resistance added as a measure to improve switching noise, vacuum tube socket and RCA jack caulking repair, parts check including block capacitors, and operation check with AC 100 to 117 V)
Accessories: none
Main specifications: vacuum tube 12 AX7 x 4, 12 x 4 line input 5 systems phono 1 system (mm), 1 pre-out system, W385 x H134 x D230 mm 7 kg