This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
Maintained. This is a heavyweight premain amplifier manufactured by PIONEER. Since they are only from the bubble period, large quantities of material were used, and they are highly cost-effective amplifiers. Even the smallest sounds are clearly reproduced, and the sound quality, which is both thick, shows how well crafted it was unique to that time. Overall there are small scratches, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.19 maintained (output relay replacement, master volume exchange, muting SW exchange, direct switch, etc., switch disassembly polishing grease application (input selector, recoup, loudness, tape 3, speaker switching SW), each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation. * (Additional note) Since the master volume is a replacement, it can be adjusted in detail when the volume is low to medium volume, but when the volume is raised and auditioned, the VR seems to be raised (12:00). (*When listening to a phono, the sound will not come out unless the EQ switch is turned on)
Accessories: instruction manual
Main specifications: output 100W+100W (8Ω) 120W+120W (6Ω) 150W+150W (4Ω) power consumption 270W dimensions W420 x H162 x D435 mm weight 19.6 kg
The price has been reduced! 2024/5/25 sales price 69,800 yen Manufacturer maintained! Rotel's pre-main amplifier. The successor to the company's RA-1062. A full-scale design that uses WBT terminals and other parts that cost more than the price. The unobtrusive and refreshing sound quality is compatible with a wide variety of genres. As for the exterior, there is a feeling of use such as scratches and dullness on the top plate. Serial 867-3031022 (Tomonori Asaine)
Maintenance information: Maintained on 2024.5.24 (volume rotation improvement implemented. Speaker relay contacts have deteriorated (both A/B), B has been replaced, and A improvements have been implemented. (Other maintenance carried out)
Accessories: remote control power cord
Main specifications: 75W+75W with MM input W431 x H99 x D358 mm 8.7 kg
The price has been drastically reduced! 2024/5/9 sales price 39,800 yen D/A converter with a built-in “ES9038PRO.” This model has a compact design, is compatible with MQA, high-resolution, and DSD sound sources, and has excellent cost performance. Desktops etc. are the worst. There are no noticeable scratches on the exterior (Tamura Eiji)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual (no Japanese), remote control, AC adapter
Main Specifications: Input: USB/OPTICAL/COAXIAL/BLUETOOTH USB: 44.1 to 768 kHz/DSD64 to 512 OPTICAL/COAXIAL: 32 to 192 khz W100 x H62 x D192 mm Weight 0.58 kg
Maintained! Inheriting the technology of the C-2302Vintage, it is a control amplifier with excellent cost performance. It uses a Teflon board, a phono input compatible with 3 positions, and WBT for input/output terminals, etc., making it a structure unique to SANSUI with no gaps in specification materials or circuit configurations. It has a sharp, clear, and powerful sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 Maintained (INPUT switch, CARTRIDGE switch, MODE switch, other selector switches x 4 disassembly contact polishing. Master volume cleaning. Reinforced power board solder. (General adjustment)
Accessories: copy of the manual
Main specifications: Phonoico built-in control amplifier, MC/MM compatible, 7 input systems, 3 output systems, W460 x H137 x D383 mm, 16.5 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
The power cable uses DIP FORMING oxygen-free copper wire with HSE treatment, which is an advanced burn-in treatment, applied to the 1.8 m conductor. The S/N is extremely high, and the strong sound in the low range is also an extremely attractive, high cost performance model. There is a film defect on part of the sheath (Kojima Yosuke)
Accessories: none
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
MC boost transformer loaded with transformers developed in collaboration with Tamura, for high impedance. Adopts a completely independent structure for the left and right, including the earth system. It matches Denon's DL-103, etc. The exterior has minor paint peeling and bumps. Serial 298 (Tamura Eiji)
Maintenance information: 2024.6.6 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 10 times W174 x H125 x D121 mm 2.5 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
The price has been reduced. 2022/8/23 selling price 3,000 yen A record cleaner from Watts in the UK. It is a wet type cleaner that is used by soaking water in the core inside. The exterior has a feeling of use. Dirt is noticeable on the core (Katsuji Hiura)
Accessories: none
Main specifications: Dimensions Diameter 25 x Width 105 mm Weight 15 g (actual measurement)
Input transformer sold 1 piece primary: 10KΩ secondary: 60 kΩ boost ratio 1:2.5 W24 x H35 mm 0.06 kg/piece (actual measurement, not including protrusions) (Kojima Yosuke)
Accessories: none
Input transparent sale primary: 10 KΩ secondary: 60 kΩ boost ratio 1:2.5 W 24 x H35 mm 60 g/piece (actual measurement, not including protrusions) with white box (Kojima Yosuke)
Accessories: white box
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see the exterior, mold, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
*Currently sold. A Yamaha center speaker with high cost performance. The full range is used for the woofer, contributing to improving the quality of the mid-range range. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: woofer 12cm cone tweeter 2.5cm soft dome type anti-magnetic impedance 6Ω allowable input 60W W465 x H150 x D185 mm 4.7 kg
Self-made enclosure for 38cm units. An ALTEC 416-8C was installed. It is sturdy and heavy. There is a feeling of use on the exterior, such as scratches, paint chips, paint on the back, and screw holes in the top plate. ※Shipping costs will be estimated separately (Mizusaki Ryo)
Accessories: saran net
Main specifications: W660 x H995 x D465 mm (including casters) woofer aperture 360 mm φweight 51.1 kg (actual measurement)
※Some glass doors are out of stock. Audio rack with casters of unknown model number and details. The shelves are adjustable with dowels. Overall, there is a feeling of use such as scratches, dirt, and seal marks. Shipping costs will be estimated separately (Daiki Goto)
Accessories: none
Main specifications: W1130 x H1010 x D470 mm Approximate weight 60 kg
Sold 1 bottle 12AU7 compatible sphere smooth plate measurement value 106 (rejection value 56) The printing with the white box has almost disappeared, but it was determined that it was an ECC82 made in Yugoslavia from the structure*The measured value represents the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Self-made enclosure. The woofer opening is about 340 mm in diameter, the horn opening above it is 450 mm x 266 mm, the upper opening is 260 mm x 134 mm, and the tweeter part is about 60 mm in diameter. Shipping costs will be estimated separately (Oikawa Tetsuji)
Accessories: none
Main specifications: plate thickness 25 mm W800 x H960 x D580 mm 54.1 kg (actual measurement)
The price has been reduced. 2024/5/20 sales price 30,000 yen A FOSTEX HA21 throat adapter is set on a self-made horn with a size that imitates the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)