Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
Self-made line selector with unknown details. It can be used with 2 input systems, 3 output systems, or 3 input systems, and 2 output systems. The exterior is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: W95 x H95 x D165 mm 778 g (actual measurement)
TRIO N-39 compatible needle. This is a replacement needle for TRIO V-39. Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
*Lead wire missing. Popular wood headshell Asada cherry blossoms from Hokkaido are used as the material, and it is a hard, good-sounding material that is also used for speakers and headphone cases (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: No accessories
Main specifications: Hokkaido Asada cherry heartwood self-weight 10.4 g
This is a replacement needle compatible with Hitachi MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle for Hitachi. Compatible with MFS-250. Unopened Operation has not been checked (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
YBA's rare power amplifier is in stock for the first time at Hi-Fi! Uses a large double power transformer and an original Motorola power transistor. Engineers who were in charge of design at Goldmund are in charge of production, and the sound field is large. It is an amplifier with a very high degree of perfection, with precise tone, medium and low frequencies with intonation, etc. The exterior has dullness, threads, etc. (YONEJIMA Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: power cord
Main specifications: 85W+85W (8Ω) 170W+170W (4Ω) W430 × D330 × H132 mm,22 kg
YBA's high-precision line preamps equipped with independent left and right volumes are in stock for the first time at Hi-Fi! In addition to the supple and glossy tone unique to YBA, you can also feel the high level of separation, it is authentic. A CP machine with a high level of satisfaction over the price. The exterior is dull and has small scratches on the top plate. Serial P21900L (Yonejima Satoshi)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: instruction manual, power cord
Main specifications: input: LINE/5 systems (RCA), output impedance: 20 ohms, output terminals: 2 systems (RCA) W430 x H83 x D330 mm, 5 kg
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
※Since it is a commercial device, there is no problem with the as-is operation, but since there is no guarantee, it is inexpensive. The sound quality is clean, fresh, and light, and the sound is firm and crisp. The sound development is such that the image that comes to mind when using the word YAMAHA for commercial use fits perfectly. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: stereo output 105W+105W (4Ω) 100W+100W (8Ω) bridge output 210W (8Ω) frequency characteristics 20Hz-50kHz damping factor 200 input terminal XLR, phone, output terminal 5WAY binding post power consumption 150W W480 x H880 x D456mm 12 kg
The price has been reduced. 2024/5/7 sales price 29,800 yen This item is currently sold because dirt, tobacco smell, and feeling of use are conspicuous. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
D terminal/RCA-D terminal/RCA cable 1.0 m There is a feeling of use due to appearance, dullness, friction, etc. (Kobayashi Hitoshi)
Maintenance information: RCA operation checked, D terminal unchecked
Accessories: original box
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
※6 month warranty. It is a speaker that was made for natural sound and gained popularity. There is no sense of emphasis and there is a good balance of strength between the high and low frequencies, which have a high texture, and it makes me feel the high level of musicality. There are scratches on the exterior. Serial 16400837L, 16400837R (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: jumper cable
Main specifications: 2-way, 2-speaker sealed, magnetic-proof type, W270 x H456 x D290 mm, 12.5 kg
Triode line exclusive vacuum tube premain developed with the novel concept of an amplifier for women. With its compact, exquisite size and high design, it can be used in a variety of situations. The exterior is good with only a small scratch and there is little feeling of use. (Kobayashi Hitoshi)
Maintenance information: 2024.6.1 operation confirmed
Accessories: power cable
Main specifications: output 3W+3W (8Ω) vacuum tubes 6BQ5 x 2, 12ax7 x 2, dimensions W190 x D180 x H135 mm weight 4.7 kg
※Operation not checked. This is a standalone remote control for the TRIODE TRV-A300XR. If you have been looking for it, please take this opportunity. There is an exterior, small wounds, and dullness (Kobayashi Hitoshi)
Maintenance information: operation unconfirmed
Accessories: none
※Since there is no main unit, operation has not been checked. Nagaoka replacement needles. This is a TRIO N-39 compatible product. As for the exterior, the needle tip is slightly to the left (Hiroki Aso)
Maintenance information: 2024.4.7 operation unchecked
Accessories: none
Main specifications: Appropriate needle pressure 1.5g
High power amplifier using a fully balanced Class D amplifier. The high output of 300W and plenty of driving power are attractive. It reproduces PC audio with low distortion and wide range. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord, adapter, original box
Main specifications: 300W×2 (4Ω) 165W×2 (8Ω) W200×D155×H41mm 0,7kg
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
Hi-Res Audio & Hi-Res Audio Wireless Bluetooth 5.1 Compatible DAC Preamp Equipped with various functions, it is compatible with a wide range of PC audio. Equipped with an AK4499ExDAC, the sound quality of the Bluetooth sound source has been greatly improved. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: PCM 44.1kHz-768kHz/16-bit - 32bit, DSD (native) DSD64-DSD512, DSD (DOP) DSD64-DSD256, coaxial/opt-in: PCM 44.1kHz-192kH/16 bit 24-bit W347xD276xH10.2mm 1.56 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/14 Torrens entry model with sales price 118,000 yen. Although it is an entry model, the silence and smoothness of the belt drive, and the delicate sound are attractive, and the tone arm is easy to adjust. Recommended for entry-level belt drive machines. There are a few small scratches on the exterior. Serial 00262803 (Fujisawa Yukishi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: copy of instruction manual, power cord, connection cord, spike base, original box
Main specifications: W420 x H125 x D330 mm 8 kg Drive system: belt drive motor: synchronous motor speed: 33 1/3, 45 rpm electronic speed selection platter: diameter 300 mm, 3 kg, aluminum power supply unit housing tone arm: static balance type
The disposal price has been reduced! Member prices are not applicable. 2024/4/28 sales price 118,000 yen including new dust cover created and maintained! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: subway, copy of instruction manual, EP adapter
Main specifications: quartz lock direct drive, full manual, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
Direct drive record player equipped with the Orthophone 2M RED as standard. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (sometimes not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
* There are adhesive marks on the main body, the tweeter is dead, etc., so it is inexpensive and is currently sold. If you're a Technics fan, you should try the SB-7000 at least once! It is made with a linear phase design and expresses excellent directivity. Although it is flat and has a wide range, it is highly efficient, so it can handle a full range of genres regardless of the amplifier. The exterior has adhesive marks, dirt, and small scratches. Shipping costs will be estimated separately (Oikawa Tetsuji)
Maintenance information: 2024.5.28 Operation confirmed
Accessories: none
Main specifications: 3-way bass reflex 6Ω 93dB linear phase speaker system W480 x H845 x D410 mm 36 kg
A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying sound (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying the sound. There are scratches and rust (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The battery has been replaced! AC & DC operation is possible. Technics slim control amplifier. This car has few quirks, and its straightforward, natural tone is impressive. It is a thin, space-saving model, and is recommended as a separate introductory machine. There are multiple scratches on the top plate on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 maintained (battery created and installed, encoder etc. cleaned, solder corrected, charging operation checked, AC and DC operation checked, audio checked for each input/output)
Accessories: remote control, instruction manual, power cord
Main specifications: PHONO input (MM/MC) equipped with 2 output systems W430 × H70 × D307 mm 3.3 kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
The price has been reduced! 2024/4/26 sales price 89,800 yen ※It's cheap because it smells like tobacco. Checked by the manufacturer! A TEAC headphone amplifier with a built-in USB DAC that condenses high-spec functions compatible with high-resolution sound sources in an A4 size compact size. The D/A converter section is equipped with Asahi Kasei Electronics' flagship model VERITA AK4497 based on 1 left and right. It is packed with various functions such as wireless playback, analog input, and external clock input. The exterior has bumps, scratches, etc. Serial 17Y0050 (Fujisawa Yukishi)
Maintenance information: Tested on 2024.4.26 TEAC including operation confirmation
Accessories: remote control, power cord
Main specifications: USB input 16 to 32 bit, 44.1 kHz to 768 kHz, DSD2.8 m to 22.5 MHz coaxial, optical digital input 16/24 bit, 32k to 192 kHz, DSD2.8 MHz (compatible with 176.4 kHz/24 bit DOP transmission) Inputs: USB B2.0, RCA, coaxial, optical x 2, coaxial 3.5mm mini, Bluetooth output: RCA, XLR, 6.3 mm standard x 2, 4.4 mm 5 poles Pentaconn W290×H84.5×D248.7mm 4.2 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg