With AI2-B1 (balanced input board) +AO2-B1 (balanced output board). This is the 2nd generation digital voicing equalizer. Compared to the previous DG-28, it is overwhelmingly easy to use and convenience has been improved. Sound quality can be controlled surprisingly smoothly by operating the stylus attached to the main unit. You can save as many as 20 patterns of personal data. There is a feeling of use on the exterior, such as line scratches on the top plate, scratches on the upper corner, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, remote control, power cord, connection cord, microphone
Main specifications: [Voicing] 1/6 octave 68 band IIR filter system adjustment range + · -12 dB [equalizer] 1/6 octave 74 band IIR filter+FIR filter/hybrid system adjustment range ± 12 dB [digital input/output] HS-Link/coaxial digital/optical digital 1 system each dimensions W465 x H151 x D396 mm weight 13.8 kg
A direct drive record player equipped with an Orthophone 2M RED as standard equipment. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (there are times when it is not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. The exterior has some impact scratches on the corner. Serial D1Y562 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
Accuphase's pure A class stereo flagship model. The balance between static and dynamic, and soft and stiff is packed into this car. A power MOS FET with a reputation for sound quality and reliability is used as the output element, and 10 parallel push-pull drives are used per channel. Furthermore, the powerful power supply unit achieves linear high power up to an ultra-low impedance of 1 ohm. There are scratches on the exterior. Serial D1Y563 (Fujisawa Yukishi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, power cable (general purpose)
Main specifications: 60 W+60 W (when 8 ohm stereo specification) 240 W (when 8 ohm mono specification/bridge connection) gain 28 dB load impedance 2 to 16 ohms (in stereo specification) 4 to 16 ohms (in mono specification/bridge connection) W465 x H238 x D515 mm weight 43 kg
Accuphase 40th anniversary SACD/CD transport. In-house one-lens/twin pickup high-speed access mechanism and ultra-heavyweight design chassis structure. It has an even richer sense of scale than the previous 800, and the high sound quality of delicate and precise music is attractive. You can relax and enjoy a variety of sauces. There are a few small scratches on the exterior. Serial K2Y319 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: remote control, instruction manual, connection cable, power cable (general purpose)
Main specifications: twin pickup high speed access mechanism connection terminal HS-LINK coaxial terminal dimensions W477 x H156 x D394 mm weight 30 kg
A model commemorating the 40th anniversary of Accuphase's founding. A full-body D/A converter equipped with the new Multiple Double Speed DSD. It is also equipped with a USB input to be compatible with modern sources. The high quality and fine particle feel unique to high-end aircraft with high SNs is irresistible. As for the exterior, there is a slight scratch on the back cab. Serial K2Y352 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, driver CD, power cable (general-purpose)
Main specifications: SACD compatible D/A converter connection terminal HS-LINK, coaxial digital, optical digital, XLR, USB (type B) frequency characteristics 0.5 to 50,000 Hz total harmonic distortion ratio 0.0005% (between 20 Hz to 20 kHz) S/N ratio 120 dB dynamic range 117 dB W477 x H156 x D394 mm 23.4 kg
*Since it comes with a T4P adapter, it can also be used with a regular player. T4P standard cartridges. If you use a jacket-sized record player from the company, such as the SL-10, how about using a spare one? The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: No accessories
Main specifications: MM round needle needle pressure 1.5 to 2.0 g
Maintained! Professional A version (8 ohm specification) of the LE15. This woofer has good response and allows you to enjoy a dry, tense sound. There is only one unit developed for monitors, and it is a unit that can handle large inputs. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (edge replacement, operation check)
Accessories: No accessories
Main specifications: 38cm cone woofer Alnico 8Ω (measured DC value 7.0Ω/6.9Ω) 150W crossover 800Hz baffle opening diameter 355mm screw pitch (diagonal) 370 mm
Maintained! The successor to the C-220, which was particular about the phono equalizer. Models from the heyday of analog are notable models that focus on records. The deep, authentic sound quality of PHONO with good sharpness is attractive. The exterior is dull and has small scratches. Serial C4X515 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (contact cleaning due to poor main volume and balance volume. Due to poor contact with the compensation center switch in the sealing door, disassembly contact polishing contact grease was applied. Electrolytic capacitor replacement near the heating unit. (Check the operation of each input/output)
Accessories: power cord, copy of instruction manual
Main specifications: PHONO (MM/MC) line input 5 systems W466 x H153 x D385 mm 9.7 kg
Carefully maintained, including replacing glass panels with new ones! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The legs are alternative rubber feet (adhesive). You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 maintained (vacuum tube cover, replacement, front panel replacement, 0.01 μF, etc., replacement, 6 electrolytic capacitors, 40 μF replacement, resistance, 1 W and 1/2 W replacement, 8 switching noise improvement measures, 1/4 W, 6 additional resistors, vacuum tube socket and RCA jack, re-caulking repair, etc. Operation checked with AC 100 to 117 V (if you are concerned about sound leakage when volume is minimal, on the top Please narrow down OUT LEVEL))
Accessories: copy of instruction manual
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Maintained by the manufacturer! Yamaha's pre-main amplifier equipped with a floating and balanced amplification power amplifier using a MOS FET. A screw fastening system is used for the connection, and thorough consideration has been given to low impedance. Equipped with a phono equalizer with MC head amplifier. The smoothness and strength of the sound are perfectly balanced, and no source is selected from records to high-resolution sound sources. The appearance is good, with a slight dullness. There are a lot of scratches on the remote control (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Maintained (replacement of power supply related resistors, etc. in the main board and INPUT board. Operation check confirmation)
Accessories: remote control, instruction manual, power cord
Main specifications: output 90W+90W (8Ω) 150W+150W (4Ω) input 7 systems (phono MM/MC) dimensions W435 x H157 x D463 mm weight 23.4 kg
※Since it is a commercial device, there is no problem with the as-is operation, but since there is no guarantee, it is inexpensive. The sound quality is clean, fresh, and light, and the sound is firm and crisp. The sound development is such that the image that comes to mind when using the word YAMAHA for commercial use fits perfectly. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, power cord
Main specifications: stereo output 105W+105W (4Ω) 100W+100W (8Ω) bridge output 210W (8Ω) frequency characteristics 20Hz-50kHz damping factor 200 input terminal XLR, phone, output terminal 5WAY binding post power consumption 150W W480 x H880 x D456mm 12 kg
Maintained by the manufacturer in 2022. This model has eliminated unnecessary auxiliary functions and has been thoroughly particular about sound quality. You can enjoy the delicate sound that pursues linearity unique to pure A class. This model has expressive power that you wouldn't think of as a pre-main amp, and is still popular today. There are no visible scratches on the exterior, etc., and it is good with a slight dullness from the age (Kobayashi Hitoshi)
Maintenance information: 2022.8.3 manufacturer maintained (output relay contact deterioration replacement, power switch defect replacement, ultimate attenuator disassembly contact cleaning, power amplifier electrolyte capacitor replacement, styrene capacitor replacement, balance volume contact deterioration replacement, overall board solder rework, comprehensive adjustment, operation characteristic test OK)
Accessories: copy of instruction manual
Main specifications: pure A grade operation 50W+50W (8Ω) line input 8 systems (RCA x 7/XLR x 1) 2 phono systems (MM/MC) W438 x H176 x D467 mm 30 kg
Comes with a 2447 special horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
※The output has been changed to an RCA terminal. 15th anniversary limited edition model of the famous DL-103 cartridge. It is a step-up transformer that was sold as a set as the DL-103 T2 at the time, and it has a solid framework and a thick sound. In addition to the exterior, as described above, you can see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5,21 operation confirmed
Accessories: Connection cable (external product)
Main specifications: frequency band 20 Hz to 70 kHz 40 ohms crosstalk 60 dB or more W92 x H55 x D145 mm 720g
※There is slight distortion, but I don't mind playing music. Altec's 10cm full range unit is rarely in stock. An ALTEC unit with an orthodox design suitable for bass reflex. Please enjoy the speedy sound unique to ALTEC. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 operation confirmed (slight distortion, no problem with music playback)
Accessories: instruction manual, gasket
Main specifications: inch screw pitch, 120 mm, playback frequency characteristics, 130 to 14,000 Hz, efficiency: 94 dB, impedance: 7 ohms, weight: 0.8 kg
Mark Levinson's current pre-main amplifier. It is composed of Mark Levinson's traditional full discrete, direct coupling, dual mono class A circuit preamp section and Class AB amplification, and a power section equipped with a large capacity power transformer and a large capacity capacitor. In addition to analog disc (MM/MC), high-resolution, and streaming playback, it also has an aptXHD compatible Bluetooth connection function. The exterior is generally good, but there is a slight scratch on the side (Tomonori Asaine)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: remote control instruction manual power cable
Main specifications: output 125 W+125 W (8 ohms) frequency response 2 Hz to 20 kHz input balance (XLR) x 1, line (RCA) x 2, phono MC x 1, MM x 1, optical x 2, coaxial x 1, USB 2.0-B x 1 Bluetooth connection compatible digital format linear PCM 32 to 384 kHz/32 bit, DSD 64 to 256 (2.8 to 11.2 MHz) digital processing MQA decoding, 7 PCM digital filters, upsampling to 352.8 kHz and 384 kHz, 4 DSD digital filters selectable W438 × H145 × D507 mm 28.1 kg
* There is no remote control, and there is no problem with the current operation, but since it is inexpensive, it is a CD player equipped with a K2 interface circuit, has plenty of functions, and is also attractive in terms of ease of use. It eliminates digital distortion caused by jitter (time difference distortion), ripple (waveform distortion), etc. There are threads and small scratches on the exterior, and deterioration can be seen on the inside of the tray (Kojima Yosuke)
Accessories: copy of the manual
Main specifications: W435 x H115 x D375 mm 9.3 kg
It's a small digital interface that fits in the palm of your hand. The input uses a Type-C USB interface. The output is I2S/optical/coaxial. The sampling rate is PCM32 bit/768 kHz compatible, DSD native, DOP64 compatible (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: original box, connection cable
Main specifications: W80 x H13 x D60 mm dead weight 120 g
The 0.5 m HDMI cable connector is made of high-grade aluminum material, and the outer skin of the cable uses a slim nylon mesh cable that can be wired neatly and is less burdensome when bending. Compatible with 4K2K (60P), it is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: case
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
The 1.2m pair of unprocessed speaker cable has excellent balance from low to high frequencies, and has an energetic and warm tone. There are threads and disappearing characters on the exterior (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
This is Shanlin's top loading CD player that will be introduced for the first time in Hi-Fi. It is compact in size, uses a Philips mechanism, is Bluetooth compatible, and is full of attractions such as variable volume functions. Good product with little feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: instruction manual, top cover, remote control, original box
Main specifications: PHILIPS CD80, SANYO HD850 drive system digital output coaxial, 1 optical system each Bluetooth compatible W255 x H188 x D68 mm 2.4 kg
Maintained by the manufacturer! Comes with an M44G cartridge and is ready to use. A new dust cover has also been created. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move the tone arm to the desired position and perform without touching it are convenient (Sasaki Shota)
Maintenance information: 2024.5.23 Maintained by the manufacturer (due to disconnection of the motor coil of the monitor inside the arm, the arm's UP/DOWN operation is fast and the operation fails → remove the arm and replace it. Arm position detection CDS replacement. Lead in adjustment, sound output test. (Create a new dust cover)
Accessories: cartridge (SHURE M44G) manual copy EP adapter
Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
MC step-up transformer. It features a body structure that thoroughly eliminates magnetic noise. The sound is fresh and smooth. The range is also wide, and the sound quality is relaxed and elegant. There are a few small scratches. Serial T30905032 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: instruction manual
Main specifications: Compatible cartridge impedance 1.5 to 40 ohms load impedance 47 kΩ boost ratio 26 dB W133 x H85 x 129 mm 1 kg
Chinese SMSL D/A converter. ESS's ES9068AS is used as the DAC. Although it is inexpensive, it supports a wide range of inputs such as AES/EBU and I2S. The exterior is dull. Serial 4600010200207 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: input USB, optical, coaxial, I2S, 1 AES/EBU system each, W210 x H40 x D170 mm 1.2 kg
DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. This cartridge can be recommended to a variety of people, from analog beginners to experts. There are no needle bends. Serial 4623 (Fujisawa Yukishi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place a needle. The LCD screen is backlit and equipped with an auto off function. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: original box, case
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
An EAR stereo power amplifier boasting a large 70W output with a KT90 parallel push configuration. While having the torque to drive large speakers, the beautiful sound that is glossy and intense is an appeal unique to EAR vacuum tube amplifiers. It also supports balanced inputs, so you can enjoy various combinations from vintage to high-end systems. It is slightly dull and has threads. Serial 010113 (Takasaki Atsushi)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: manual, power cord, cleaning cloth
Main specifications: 60W+60W (8Ω) class A parallel push-pull vacuum tube ECC83 x 2, ECC82 x 2, KT90 x 8 W405 x H165 x D405 mm 24 kg
Maintained in 2015. The 606 is thick and unimaginable from its compact exterior. The good sound unique to QUAD allows you to enjoy not only classical music, but also jazz vocals in a mild way. The high level of musicality that makes you enjoy the music with a pleasant tone stands out. There is deterioration in exterior paint (Murakoshi Yoichi)
Maintenance information: 2015.9.12 maintenance completed (internal power transfer → malt plane deterioration → dismantling and reinstallation, exchange of both channel in-board bypass C, gain setting C, etc., TR check → OK, operation inspection check)
Accessories: power cord
Main specifications: output 140W+140W (8Ω) W321×H140×D238mm 12kg
Everything from the motor power supply to the tone arm has been fully maintained! New dust cover created! A player with a long-arm Ortofon AS-309S mounted on a TD-127. It comes with a dedicated optional weight, so you can use heavyweight cartridges such as SPUs. It has a high ability as a system, and it is a player that can play vividly regardless of genre, from classical to rock ※ The lifter works electrically, but since there is no sensor on the tone arm, auto stop or auto lift up is not possible (Oikawa Tetsuji)
Maintenance information: 2024.5.22 Maintained (deteriorated parts on the board, semi-fixed VOL for rotation speed adjustment, semi-fixed VOL replacement for sensor sensitivity adjustment. Front panel pitch adjustment VOL disassembly/contact polishing. Resolder the board. Disassemble and clean the arm. Drive belt replacement. Indicator lamp replacement. Grease up the platter bearing. Lubricate the motor shaft and disassemble and clean the clutch part. Floating, turntable rotation speed check, arm needle pressure check. Check the sound output. Chassis cleaning. (Comprehensive operation confirmation inspection)
Accessories: copy of instruction manual, optional weight
Main specifications: belt drive floating suspension 33/45/78rpm turntable 30cm zinc alloy 3.2kg double 16-pole synchronous motor speed fine adjustment range ± 6% W555 × H200 × D460 mm 20.4 kg
A CD player equipped with a DSD-compatible USB-DAC. The high quality playback sound is attractive due to the overwhelming amount of information and detail. The USB-A terminal on the front supports playback of iPods and USB memory devices, and a USB-B terminal (compatible only with PCs of the same age) is mounted on the back. There is a line scratch on the top plate, and the tray is slightly sticky (Oikawa Tetsuji)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: 192 kHz/32 bit compatible DAC circuit, optical digital input x 1, USB (Type B) x 1, USB (Type A) x 1, analog audio output (L/R) x 1, optical digital output x 1, coaxial digital output x 1, W434 x H134 x D331 mm 8.2 kg
Luxpremain entry model. You can enjoy solid LUXMAN sound at an affordable price. We recommend combining it with European speakers that are glossy, soft, and have a good tone. The exterior is dull and there are abrasions and small scratches on the top plate. Serial M90410348A (Yonejima Satoshi)
Maintenance information: 2024.5.22 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) line input 4 systems (RCA x 4, XLR x 1), 1 phono system (MM), 2 tape systems W467 x H151 x D439 mm 13 kg
A full-range speaker with a high BOSE interior. 1 bottle only. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior has yellowness, dullness, dirt, scratches, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Currently sold. The tuner's auto tuning is not working, but the current situation is. This K series CD/USB receiver is compatible with playback of iPods/iPhones, USB memory devices, etc. This is a flat, unobtrusive amplifier with a straightforward sound. It can also be connected to a PC and is recommended for those who want to get started with desktop audio. Appearance, dullness, small scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmed (tuner auto tuning not working, other operations confirmed)
Accessories: remote control, power cord
Main specifications: 50W+50W W245 x H104 x D309 mm weight 5.7 kg
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Some SP terminal plates and screws on the OUT side are missing. A full-range speaker with a high BOSE interior. An indoor speaker with high efficiency and clear sound quality. It is optimally designed for low-volume background music. The exterior is dull and has scratches (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: mounting hardware, instruction manual
Main specifications: 5.7 cm full range driver x 1 allowable input 16 W impedance 8 ohms maximum sound pressure level 96 dB playback frequency band 90 Hz to 16 kHz W251 x H125 x D119 mm mass 1.8 kg
Maintained! It is the 5th generation of the 907, the top model in the D series that continues to be popular. Brush-ups have been made, such as strengthening the power supply section from the previous game, and the ability to reproduce the low frequency range has been improved. Precision is also added to the wild Sansui sound that feels torque, making it fun to listen to classical music. The exterior has line scratches, threads, and chips in the corners. Serial 605104895 (Fujisawa Yukishi)
Maintenance information: 2024.5.21 maintained (tone, subsonic, CD direct, muting, input selector (all), reck-out, phono selector switch disassembly polishing grease application, output relay replacement, protector transistor replacement, power supply unit, constant current diode, resistor exchange, selector lamp replacement, adjustment volume replacement, solder repair, SP selector fixed, master volume, other VR Cleaning, internal inspection cleaning, adjustment inspection, operation confirmation. (*Relay operation takes 15 to 20 seconds)
Accessories: No accessories
Main specifications: 160W+160W (8Ω) PHONO (MM/MC) compatible W466 x H161 x D431 mm 26 kg
Maintained. 300B single amplifier using all Tamura transformers. It is a configuration that firmly holds the basics of a single amplifier using a rectifier tube. Furthermore, you can use it safely with 300B DC ignition with a regulator (Oikawa Tetsuji)
Maintenance information: 2024.5.21 maintained (2 main volume gang error replacements, CV378/GZ37 deterioration replacement, RCA jack and vacuum tube socket caulking repair*Other operation checked with AC100V (rated output measured at 8W SP: 8Ω))
Accessories: none
Main specifications: used vacuum tube 300B 6SL7/GZ37/5U4G/5X4G output 7W x 2 W430 x D215 x H210 mm 19 kg
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g