Sold 1 bottle EL34 compatible ball, made in Japan, black plate, measured value 52 (rejected value 30) with original box, there is a slight getter burn ※ pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
Pair tube 45 Special compatible ball straight heat triode tube fishing rod type filament measurement value 84/84 (rejected value 55) with white box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The disposal price has been reduced. Member prices are not applicable. 2024/5/20 sales price 198,000 yen Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
Power Transformer sold 1 piece Osaka High Wave Power Transformer Primary: 100-110V/3A Secondary: 12-18-20-24V/5A W97 × H81 × D96mm Approximately 3kg (Measured, Not Including Projection) Source Box with (Yosuke Kojima)
Accessories: original box
Pair tube (checked with a tube checker) beam quadrupole. There is a tea box. Measured value 36,34/30 (rejection value) *The pair was determined based on the GM value measured by the testing machine TV-7. The ※ logo is scratched, so it's a bargain.
The price has been drastically reduced. 2023/9/9 sales price 69,800 yen*The diaphragm has been replaced with a D8R2421, and the label on one side is missing, so it's cheap. Maintained! Representative of JBL's 1-inch driver units. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high range sound are appealing, which is unbelievable for some input. There are small scratches and paint peeling (Oikawa Tetsuji)
Maintenance information: 2023.9.9 maintained (diaphragm installation adjustment (vibration plate is equipped with D8R2421)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, W145 x D97 mm, 5.1 kg/bottle
Maintained! A 1500 Hz crossover network perfect for combining the LE14A with the 175DLH and LE175. The exterior is dull and has small scratches (Oikawa Tetsuji)
Maintenance information: 2024.4.17 Maintained (2 VR attenuators, 12 screws, 24 insulating washers replaced)
Accessories: none
A compact and lightweight flat front biladial horn. It keeps horizontal characteristics constant and is useful for correcting driver characteristics (Daiki Goto)
Accessories: none
Main specifications: 25 mm throat diameter, compatible driver, 2426H/J, use minimum frequency of 500 Hz, recommended minimum crossover frequency of 630 Hz, made of high-density polyurethane, W448 x H173 x D 174 mm, 1.4 kg
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are small scratches etc. on the exterior. Serial 7413 10417 (Tomonori Asaine)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
All 6 woofers and midrange edges have been replaced! A European-designed tall boy speaker that drastically changed the image of JBL. The combination of gentle treble and unobtrusive low frequencies is truly European modern. It's a great speaker for listening to female vocals and small-group classical music. There are dents, line marks, etc. on the top plate and sides (Oikawa Tetsuji)
Maintenance information: 2024.5.15 maintained (2108H edge replacement and disconnection repair, 2105 edge replacement)
Accessories: jumper plate
Key Specifications: 3 Way 4 Speaker Crossover 300Hz/3KHz 91dB 6Ω W273 × H1130 × D342 mm 25.0 kg
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg
2023.12.18Maintained professional cross 800Hz network. It is used in the 4320, etc., and the low frequencies are pushed out smoothly, giving the impression that the clarity of the mid-high range has improved. This network is useful for creating 2-way systems where woofers have a certain amount of area. How about making a 2-way horn system with a 16Ω unit? There are stains and rust on the main body. (TERAMOTO Hidehiko)
Maintenance information: 2023.12.18 Maintained (terminal rust removal treatment, cleaning, mounting screw replacement. SW type ATT contact cleaning. Frequency characteristics are measured and checked, and the original capacitors are continuously used for good results. (Check the input/output waveform and balance, check the sound output)
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit