Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! A classic British Quad stereo power amplifier. Small in size yet full torque. The sound, which is as deep as a tube amp, exudes an appeal that won't fade. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 62226 (Yonejima Satoshi)
Maintenance Information: 2024.3.25 Maintained (INPUT DIN 4P replacement, internal Tr, C, R all checks. DIN4P-RCA female cable created. Operation check, pattern solder processing)
Accessories: power cable, connection cable
Main specifications: 45W+45W W120×H159×D324mm 8.2 kg
The disposal price has been reduced. Member prices are not applicable. 2024/1/18 sales price 118,000 yen Maintained! QUAD's first transistor preamp. The deep sound image and the impression that the natural atmosphere has definitely increased, and the glossy way it rides and the sound that goes through the core make you think it's a vacuum tube amplifier. Of course, it's a combination with the 303, and the sound doesn't feel out of place even when paired with a vacuum tube power amplifier. BAL knobs are worn out (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (front push button contact failure → cleaning, PHONO/LINE in-board coupling capacitor replacement. AC spark killer capacitor broken → replaced, each VOL cleaned, power cable created)
Accessories: copy of instruction manual
Main specifications: external dimensions W550 x H110 x D220 mm, weight approx. 7.4 kg (actual measurement) [33] 3 input/line systems, 1 phono system (MM) [FM3] tubular FM dedicated tuner with automatic stereo/mono switching
The price has been reduced! 2024/4/19 sales price 79,800 yen ※1 unit only. Maintained! It is originally a professional mono amplifier, but there is only 1 unit. You can feel the strong power of the sound quality even with just one unit. It seems to be useful for mono and center speakers. There are scratches and paint peeling on the exterior. Serial Q001769 (Fujisawa Yukishi)
Maintenance information: 2024.4.19 Maintained (XLR speaker cable created (3 meters)). Electrolytic capacitor replacement. ATT cleaning. Solder correction. Rubber feet added. Bias offset check. Output audio check. Input ① GND ② HOT ③ GND (unbalanced) output ① not used ② is set to plus ③ minus 8 Ω load. (Also, a pop sound is made when the power is on and off, but this is a specification)
Accessories: speaker cable, power cable
Main specifications: 8 ohms W482.6 x H88 x D320 mm weight 13 kg
The price has been drastically reduced. 2024/3/2 sales price 99,800 yen Maintained! professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.3.2 maintained (internal dismantling all check, Tr, C, R check, ±B INPUT bypass C replacement, Tr, R, etc., all OK, INPUT photocoupler check, operation check)
Accessories: copy of instruction manual, power cord, dedicated SP cord (cable length 2.5 m)
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
The price has been reduced. 2024/5/10 sales price 99,800 yen Maintained. professional monitor amplifier It has strength unique to commercial use, and the driving power in the low range is truly remarkable. However, it also has a strong sense of temperature typical of a quad, so it is an amplifier that I would like people who are shunned when the sound is too straight for commercial use to try it once. There is a feeling of use such as a scuff on the top plate. Serial Q002959 (Mizushima Itsuro)
Maintenance information: 2024.2.15 maintenance (internal Tr, C, R check, output phase correction resistor, DC IN± bypass C, gain setting C, CDS replacement within the INPUT photocoupler. INPUT VOL CLEANING Output cable XLR cannon attached)
Accessories: copy of instruction manual, power cable, speaker cable
Main specifications: 100W+100W (8Ω) W483 × H88 × D310 mm 12.5 kg
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, threads, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
The price has been reduced. 2024/2/2 sales price 2,500 yen. ※Inexpensive because 1 bottle is out of stock. Orthophone speaker terminal joint cable Be sure to improve the sound quality of speakers compatible with bi-wiring with 7N ultra-high purity copper wire. One vinyl cover is short (Takasaki Atsushi)
Accessories: original box
Main specifications: 7N copper (diameter 1mm) +gold plating treatment approx. 150mm/book
The 2.1 m pair end of the speaker cable has an unprocessed twist specification, making it less susceptible to sound quality deterioration due to magnetic effects, and the sound is straight. The exterior is dirty and dull, and you can see the feeling of use such as magic writing (Tamai Jun)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: none
Speaker cable A standard BELDEN speaker cable nicknamed “sea snake” with an unprocessed 1.1 m pair end. It is a cable with thickness and a sense of extrusion in the mid-range (Murakoshi Yoichi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The RCA cable uses 102 SSC as the 1.0 m pair conductor and polymer polyolefin as the insulator. This is Oyaide's proud work, which is particular about precision processing. I am overwhelmed by how clear the sound quality surpasses the previous model. (FUJISAWA KOSHI)
Maintenance information: 2024.5.23 continuity confirmed
Accessories: No accessories
The disposal price has been reduced. Member discounts are not applicable. 2024/5/16 sales price 598,000 yen The version has been upgraded from DS/K1 to K3. A model equipped with KATALIST that has adopted a new clock architecture. Similar to the higher-level model KLIMAX DS/3, DSD can now also be played natively, and the range of playback has greatly expanded. It is a degree of perfection that is close to the height of the KLIMAX DS, such as improvements in power supply to the DAC and processor sections by examining the circuit layout. There is a line scratch on the display (Murakoshi Yoichi)
Maintenance information: 2024.5.15 sound output confirmed
Accessories: instruction manual, original box
Main specifications: Playback formats: DSF, DFF, FLAC, WAV, ALAC, AIFF, AAC, MP3, WMA, VORBIS (same as DS and other models) Compatible resolution: 7.35-192 kHz, 16-24 bit (similar to DS and other models) DSD64 (2.8224 MHz) /DSD128 (5.6448 MHz) compatible analog audio output: XLR balanced, RCA unbalanced (fixed/variable output) Digital audio output: 75Ω, BNC, 1 line, EXAKT LINK2 system, W380 x D380 x H91 mm, 5.6 kg
Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/31 Sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy simple 2.1 channels. As for the exterior, there are cracks in the woofer cabinet, overall dullness, and small scratches. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: no accessories
Main Specifications: Rated Input 100W Impedance 6Ω Satellite Speaker 6.0 cm Driver x 2, Antimagnetic Type, W78 x H157 x D104 mm, 1.1 kg, Subwoofer, 13 cm, 2 Drivers, W485 x H358 x D192 mm, 9.1 kg
※Shipping service. Special Feature = Listen to the Latest MC Cartridge/Audio Famous Machine Award 2008 Decided/World Speaker Brand Large Aperture Temptation 1/Infatuation with Open Decks/TAD “TAD Reference One” that sounds famous devices/30th anniversary Learn about Dynaudio's great challenge to high definition speakers/Check out Zonotone Cable's ability in analog playback /Type Specific Tube Bulb Amplifier Research High-End Amplifier/Published on H20.1.20/ Posted models: Criterion Analogue Playback System/gyrodec-UNV1/EA-1 2 P-3G/AT33MONO/MC Windfeld/A-S2000/Illusion A7/SC-11S1 SM-11S1/C-600F M-600A/AT33PTG/YC-03S/Model 7000/Celebration MK2/ZYX-4D/ Stradivari/Hyper Eminent/TRV-M88pp/reference-two reference-one/SD-2 KR/The photograph is a sample, so the actual product may be broken and there may be writing etc.
Digital cable 1.0m RCA terminal It uses a titanium-containing sheath, OFC (oxygen-free copper) wire, gold-plated contacts that are resistant to aging, and a sturdy metal pin plug with strong reliability. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2023.7.20 Conductivity confirmed
Accessories: original box
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
Speaker cable This is an audio-technica home theater speaker cable with an unprocessed 3.0 m end. It's only for home theaters, so it's good to tune the sound field and sense of realism (Kobayashi Hitoshi)
Maintenance information: 2024.3.9 continuity confirmed
Accessories: none
Speaker cable is a basic type of high-purity OFC cable with unprocessed 1.3 m pair ends that are easy to use, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
An introductory cable with 1.5 m pair untreated ends that are soft and easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. Good product with little feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
2.0m optical cable DVD LINK series optical cable Highly efficient transmission has been achieved through round processing of terminals (Murakoshi Yoichi)
Maintenance information: 2024.5.10 continuity confirmed
Accessories: none
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
Maintained! 15th anniversary model of the 607 series. MOS-FET is used for the power stage, adding a sense of transparency to its characteristic heat, and is compatible with various music genres. It has a configuration that exceeds its class, such as balanced input support, and it is a powerful machine that is still popular today. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 maintenance completed (tone and other switches dismantled and polished, coated with grease (loudness, muting, processor, subsonic, input selector, power amplifier direct, source direct switch), output relay replacement, protector part capacitor replacement, solder repair, internal inspection and cleaning, bottom repair, operation confirmation)
Accessories: power cable, copy of manual
Main specifications: 45W+45W (8Ω) PHONO (MM/MC) W460 × H159 × D446mm 18.8 kg
Power cable 1.2m Power cable using the original precision conductor “102SSC”. A cable with a strong monitor color that clearly reproduces music. Recommended for connecting to professional audio devices. (FUJISAWA KOSHI)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
The disposal price has been reduced. Member discounts are not applicable. 2023/6/12 sales price 49,800 yen ※1 mono amplifier only. The display lamp visible through the lattice is a transistor mono power amplifier with an indescribable design. As for the sound quality, it is a powerful sound with a sense of overhang while making you feel thick, and the low frequencies are not sluggish, making you listen to a pleasant sound. The exterior is dull all over, scratches on the top plate, etc., and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.6.13 Maintained (output relay contact correction input volume disassembly contact correction protection circuit transistor replacement input terminal polish)
Accessories: none
Main specifications: effective output 150 W, input level adjustment, SNR 110 dB, dimensions W436 x H95 x D328 mm, weight 11.5 kg/1 unit
The disposal price has been reduced (member prices are not applicable). 2023/11/26 Sales price 128,000 yen Maintained in 2022/6! An eye-catching power amplifier with its black and large power meter typical of Sansui. It entertains me with its power, which can be felt from its appearance, and its supple, stretchy sound quality. The exterior has dullness, scratches, rust, etc. over time (Oikawa Tetsuji)
Maintenance information: 2022.6.23 Maintained (both channel volumes replaced. SP relay bad contact replacement. Replace protectors, deteriorated transistors, resistors, and diodes in meter boards. Replace deteriorated transistors and resistors in the power supply board. Replace deteriorated transistors and capacitors in the drive board. OUTPUT selector switch cleaning. (General adjustment)
Accessories: none
Main specifications: left and right independent 2 power supply diamond differential circuit effective output 110W+110W (8Ω) load impedance 4 to 16 ohms W482 x H187 x D450 mm 20.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso)
Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check)
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
The disposal price has been reduced! Member prices are not applicable. 2024/4/6 sales price 218,000 yen ※The exterior is in poor condition, so it's cheap. Maintained! 100V specification genuine Baes product. A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. The exterior has rust spots, paint deterioration, and unevenness on the front. Serial JBZ7419 (Fujisawa Yukishi)
Maintenance information: 2024.4.6 maintained (TONE, MODE, INPUT, BAL etc. disassembly contact polishing grease applied. All push switch contacts are coated with abrasive grease. Mode switch, volume, balance volume contact cleaning. Electrolytic capacitor replacement. Panel lamp replacement Panel peeling correction. ※Since the panel color is burnt, there is color unevenness with the correction part. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
High accuracy master clock generator. Equipped with a large toroidal core power transformer, the outline of the sound of your system is defined even more firmly with a stable, high-precision clock at all times. With TEAC's unique A4 size design, you don't have to worry about the location. The combination with the company's UD-503 and NT-503 is also a good design. * It becomes almost stable in about 2 minutes after turning on the power, but it takes about 10 minutes for it to completely stabilize. In terms of sound quality, it is recommended to wait at least 10 minutes before use. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 22Y0008 (Tomonori Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, original box, power cable
Main specifications: 4 crystal oscillating BNC output systems, output frequency 10 MHz, output impedance 50 Ω, output level 0.5 Vrms (sine wave) W290 x H54.5 x D248.7 mm (including protrusions) 3.6 kg
※Only 1 speaker cable 1.3 m terminal is a popular sold out speaker cable for the CARDAS entry series, unprocessed (Mizushima Itsuro)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Speaker cable is a current CARDAS entry series speaker cable with an unprocessed 4-core structure with 1.5 m pair terminals. Use Perfect Surface Copper. The high frequency extension of the single line and the Ritz line is an appeal that cannot be obtained anywhere else. (FUJISAWA KOSHI)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: No accessories
1650 series SACD/CD player It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.5.9 operation confirmed
Accessories: remote control, power cable
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi)
Maintenance information: 2024.5.31 operation confirmed
Accessories: remote control, instruction manual, power cord, RCA cable, original box
Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
Maintained by the manufacturer! The 3rd generation model of the S10 series. Equipped with AL24 Processing, an analog waveform reproduction technology. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Yamato Yuki)
Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations, but if it breaks down in the future, pickups cannot be obtained. Loading belt tray opening/closing SW replacement sound test)
Accessories: instruction manual copy remote control power cable
Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/18 sales price 49,800 yen Maintained! An American-made amplifier from the 1970s that can hardly be seen today. Circuits for self-preservation, such as security, correction, and protection, have been cut off, and I think that handsome atmosphere is well reflected in the sound. It has the same feeling of use as the model year (Daiki Goto)
Maintenance information: 2024.1.18 Maintained (LED installation (original not available) poor power stage transistor deterioration, defective transistor in the board → replacement. Bias adjustment, operation check.)
Accessories: none
Main specifications: size (actual measurement) W406 x H155 x D327 mm weight (actual measurement) 12.2 kg
Denon's premium analog player. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: power cable, connection cord
Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
*One SP terminal is a replacement, so it is inexpensive. It hasn't arrived in a long time. This speaker system inherits the DS-205 design philosophy of making small-aperture woofers sound smoothly with a large capacity enclosure. You can enjoy the soft texture and loud sound. Serial 12502/12517 (Murakoshi Yoichi)
Maintenance information: 2024.5.30 maintenance (exterior cleaning/touch repair, 1 terminal replacement)
Accessories: jumper cable (external product)
Main specifications: 2-way bass reflex type 6.3 ohm 87 dB W360 x H925 x D290 mm 25 kg
Beautiful item with original box! In addition to conventional MC/MM cartridges, this is a Soul Note all-in-one phono equalizer that can reproduce all types of cartridges compatible with DS Audio photoelectric cartridges. The fully balanced non-feedback circuit of the signboard technology is used. The bold sound, where you can feel the extrusion and power, is irresistible. The condition is generally good. Serial 23040008 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cable, spike, tool source box
Main specifications: input sensitivity MC0.4mV, mm4mV, opt50mV gain MC72dB, mm52dB, opt30dB rated output voltage BALANCE2.8V, UNBALANCE 1.4V MC load resistance 3Ω/6Ω/12Ω/24Ω/40Ω/100Ω MM load capacity 100P/200P/350P W430 x H160 x D410 mm weight 21 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
Power cable 3.0 m A power cable that uses the company's KS-00 cable, uses an AET PSE-018V2HG as the outlet plug, and an AET PSE-320HG as the inlet plug. Compared to the predecessor, it is a monitor and high-resolution oriented model that has excellent high-frequency reproduction capability and resolution, and transmits sound images more clearly than ever before (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 18,000 yen USB isolator Input to USB Type-B and output from USB Type-A. USB low-speed (1.5Mbps) and full-speed (12Mbps) dedicated hubs. Please refer to the manufacturer's website for details. https://octy.co.jp/products/usb20.html ※5V power supply is not included. Please prepare separately (Oikawa Tetsuji)
Maintenance information: 2023.12.10 storefront operation confirmed (5V test power supply is supplied, and sound output operation confirmed by connecting between PC and USB DAC)
Accessories: *USB microB 5V power supply is not included. Please use your own USB adapter or the like.
Main specifications: 110mm×64mm×30mm 230g
A rare FR dynamic balance type long arm, which has not arrived in a long time, has arrived! Dynamically balanced Roman arms. It uses a central mass concentration structure and a differential damping mechanism to produce precise and accurate sound. *Phono cable is missing. Serial 161934 (Tamura Eiji)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: original box, instruction manual
Main specifications: Long arm dynamic balance needle pressure range 0 to 3 g total length 379 mm effective length 307 mm overhang 12 mm compatible cartridge 17 to 32 g arm height 36 to 72 mm
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
Since there are no connectable devices, it has not been checked. D-terminal cable The highest-grade D-terminal cable using a 1.5m silver-coated OFC conductor is ideal for transmitting high image quality images for progressive, high-definition devices, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none