An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Unspecified power cable 2.0m. The plug is Panasonic WF5018K, and the connector is made by Global Electronics. This cable is relatively easy to handle. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
The price has been reduced! 2023/10/7 This is a self-made MC step-up transformer with a sales price of 20,000 yen. According to the specifications, the boost ratio appears to be 1:10. Use it with high output cartridges such as the DL-103! (FUJISAWA KOSHI)
Maintenance information: 2023.10.7 operation confirmed
Accessories: none
Main specifications: MC boost transformer input/output 1 system boost ratio 1:10 W 110 x H45 x D145 mm (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 12,800 yen. Ground wire 4.0m American steel vintage ground cable. Sturdy single wire. Depending on the idea, it can also be used for wiring other than ground wires. If you've been looking for one, why don't you take this opportunity (Murakoshi Yoichi)
Maintenance information: 2024.2.9 continuity confirmed
Accessories: none
The price has been reduced! 2024/4/11 sales price 1,000 yen, set of 4 jumper cables using WE single-wire 16GA, total length 5.5 mm, all bent in a U-shape. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
※Shipping service. 10th anniversary commemoration of the first publication · 1st edition = reader visits The appeal of TUBE SOUND/Listen to the supreme WE amplifier 8B+9A/ tubular kit amplifier selected by “sound” /300B single output transformer listen and comparison/2005.11.28 published. The photograph is a sample, so the actual product may be broken, or there may be markings etc.
※Shipping service. This is a brand new item. Mr. Nagase Muneshige called Nazo Otoko, the host of an audio blog popular among high-end audio users around the country. This book is a compilation of records of 15 years of audio exploration that Mr. Nagase has spelled out on his blog. “Double Woofers,” which was formed in the wake of the JBL 4350, is the origin of its activities, and in addition to high-end amplifiers such as Mark Levinson, Claire, and Goldmund and the JBL 4350, high-end devices coveted by enthusiasts, such as Avalon, Apogee, and Full Epilogue, have appeared one after another. A must-read for high-end audiophiles.
4.5 m TOSLINK cable The details of the square type - square type are unknown, but it is a type that is easy to handle when it comes to long cables. The sheath smells like tobacco (Takahashi Nobuyuki)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Empire's unknown replacement needle. Very similar for 909E/X, but details are unknown. Since there is no main unit, operation has not been confirmed. There is a feeling of use (Takasaki Atsushi)
Maintenance Information: Operation Unconfirmed
Accessories: none
Speaker cable 3.0 m/4.3 m pair end end uses a μ-conductor with unique processing applied to the PC-OCC conductor for the purpose of reproducing sound with good sharpness, and it is a cable with excellent cost performance that also achieves delicate high-frequency reproduction (Fujisawa Yukishi)
Maintenance information: 2024.5.31 continuity confirmed
Accessories: No accessories
※There is no problem with operation, but since it is cheap, it will be handed over as is. A small 2-way speaker with excellent sense of localization and transparency. The high frequency that extends smoothly is easy on the ears, and although it is a basic model, it has a solid musical sound, which is attractive. There is a stain on the saran net on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: 2 way 2 speakers rear bass reflex frequency band 53 Hz to 26.5 kHz crossover 2.9 kHz 6 Ω 86.5 dB W162 x H274 x D228 mm 4.2 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
Replacement needle for YAMAHA cartridge CG-8000 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6800 Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: unconfirmed
Accessories: original box
Replacement needle for YAMAHA cartridge CG-6600S. Since it is only a replacement needle, it has not been checked. (KOBAYASHI Hitoshi)
Maintenance information: operation unconfirmed
Accessories: original box
N-4500/2 compatible Yamaha CG-4500/2 replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
The world's standard club mixer model, which won the Best Club Mixer award in 2002 and 2003. Equipped with a 4-band EQ, the 4 dual stereo channels can be freely crossfaded, and are compatible with various mix styles and performance styles. High sound quality is also a factor in its popularity. It is dull and has a feeling of use. Serial X262120X172629 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord
Main specifications: 6 x dual stereo input 4 x RIAA (phono) input 2 x microphone input 4 band EQ high quality P&G/VCA fader analog VCF x 2 channel & master/cue peak meter split cue function booth monitor out frequency characteristics 20hzto40kHz+0/-1dB maximum power consumption 30W size W320 x H105 x D358 mm 5 kg
Sound output has been confirmed, and since it is inexpensive, it is currently sold. This speaker was designed for the company's FR-N Hi-MD components. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: W167 x H290 x D230 mm 3.9 kg (actual measurement)
Optical digital cable 2.0m optical mini plug to optical angle plug The exterior and original box are damaged, but the main body is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box (damaged)
Optical digital cable 1.0m optical mini plug to optical angle plug If you've been looking for one, take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
XLR cable 5.0 m male to female details unknown. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
This is a boost transformer (Type L version) for FR low impedance MC cartridges. There is a sense of clarity, and the clean, straight sound is attractive. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: none
Main specifications: input impedance 3 ohms or less, output impedance 47 to 50 kΩ, W158 x H60 x D120 mm, 2.1 kg
It smells like an air freshener, and since ATT has cracks, it is cheap, and is currently discontinued. A bookshelf type speaker that uses a uniquely developed hard dome unit. It is a speaker characterized by a well-balanced, clear, and bright sound. There are small scratches, dents, and net holes (Daiki Goto)
Maintenance information: 2024.3.12 operation confirmed (with ATT gaps)
Accessories: none
Main specifications: 3 way 3 speaker bass reflex system frequency band 30Hz to 30kHz impedance 6Ω sound pressure level 94 dB dimensions W390 x H710 x D350 mm weight 27.5 kg/book
The disposal price has been reduced. Member discounts are not applicable. 2023/5/5 sales price 9,800 yen. ※1 bottle only. A crossover network with exactly the same structure as the company's X8. This network is recommended when using BB4 with a T350 or 12TRXB. There is a feeling of use such as peeling and scratching on the label (Mizushima Itsuro)
Maintenance information: 2023.5.5 operation confirmed
Accessories: none
Main specifications: crossover frequency 3,500 Hz 8 ohms allowable input 100 W external dimensions W114 x H89 x D92 mm weight 680 g
※There are no operation confirmation issues, but since it is for business use, it will be handed over as is without warranty. It is an attractive amplifier with a maximum output of 100W during 4-channel operation, and the strength unique to commercial use. There is a feeling of use such as scratches and dullness on the exterior as a whole (Ryo Mizusaki)
Maintenance information: 2024.2.3 sound output confirmed
Accessories: none
Main specifications: 80 W x 4 (8 Ω continuous output) 100 W x 4 (4 Ω continuous output) 200 W (BTL 8 Ω continuous output) W480 x H88 x D417 mm weight 12.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
※ The effect of the brake is bad, but it is currently sold. Victorola's tabletop gramophone. The antique-style exterior stirs up the desire to own it. The sound is also an item full of nostalgic charm that cannot be created with modern audio. The exterior has dullness, scratches, and threads (Yoichi Murakoshi)
Maintenance information: 2022.8.123 Sound output confirmed
Accessories: none
Main specifications: W394 × H340 × D488 mm (excluding handle) 19.6 kg
common needle. Compatible cartridges are ONKYO DN-201, AKAI RS-90, MarantzCT-6S, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges are Victor DT-59, ONKYO DN-68ST, etc. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-72D, TRIO N-64, Mitsubishi 3D-54M AKAI RS-77, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Toshiba N-78D, TRIO N-64, SHARP STY-129, Marantz CTS-143, etc. Operation has not been checked (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: original box
common needle. Compatible cartridges include Hitachi VFS-260, SONY VM-25G, YAMAHA CG-6500, ONKYO OC-27V, etc. Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
MM/MC phono equalizer from the handmade amplifier workshop Aurora Sound. A model that achieves flat characteristics without coloring using the latest semiconductor technology and a complete DC circuit using the latest semiconductor technology and a Rundahl transformer. Equipped with various functions such as MC/MM switching, MC impedance switching, direct/subsonic filter switching, stereo/mono switching, and cartridge demagnetization, etc., stress-free operability is also attractive. Serial 4J17346 (Fujisawa Yukishi)
Maintenance information: 2024.6.3 operation confirmed
Accessories: instruction manual, power cord, connection cord, power supply unit
Main specifications: [main body] W260 x D250 x H100 mm approx. 3 kg [power supply part] W114 x D200 x H70 mm approx. 1.4 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/5/23 sales price 148,000 yen This is a Venere series bookshelf model designed with a sharp form, breaking away from conventional classical styles. It is a speaker with an excellent glossy, smooth high frequency, and you can enjoy a particularly beautiful sound with stringed instruments and vocals. Serial 0077513 0077513 (Yamato Yuki)
Maintenance information: 2024.5.23 Operation confirmed
Accessories: Saran net original box jumper plate
Main specifications: Wave reflex bookshelf type unit tweeter 29 mm high resolution silk soft dome woofer 180 mm cone type frequency characteristics 45 Hz to 25,000 Hz output sound pressure level 88 dB/w/m 6 ohms size W246 x H449 x D336 mm 7.0 kg (1)
The disposal price has been reduced. Member discounts are not applicable. 2024/5/26 sales price 348,000 yen The current ELAC speakers have arrived! It firmly follows the merits of ELAC up until now, and shines with a higher degree of perfection than ever before. With an expanse that doesn't make you feel the presence of the speaker, and the sound is delicate and bright, it is a practical speaker regardless of genre. There is a small dent in the lower woofer on one side. Serial 31800E000053/31800E000056 (Takasaki Atsushi)
Maintenance information: 2024.5.25 sound output confirmed
Accessories: instruction manual, jumper, spike holder, original box (cushioning material partially broken)
Main specifications: 2.5-way bass reflex type crossover frequency 450/2400 Hz frequency characteristics 30 to 50,000 Hz efficiency 88 dB recommended amplifier power 40 to 300 W rated input 130 W impedance 4 ohms W229 ✕ H1,000 x D266 mm 19.1 kg
Replacement needle for Victor MD-1050Z, Z5P Operation not confirmed (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
VICTOR DT-51 and ST-51 compatible needles Unused, unopened Operation has not been confirmed. No warranty, sold as is (Kobayashi Hitoshi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Compatible needle for VICTOR MD-1013Z Unused, operation unconfirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: I think it is 2.5 to 3.5 g.
Victor DT-20 compatible CS-1021 and HMD-1008 compatible replacement needles Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
original needle. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Tomonori Asae)
Maintenance information: 2024.6.1 operation confirmed
Accessories: none
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
*The stylus is a JICO VN35HE. Good stylus and cantilever. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: No accessories
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g