The price has been reduced. 2024/5/11 sales price 39,800 yen ADK 4-tier rack. Of course, other rack units can be stacked and used. Depending on the size of the device, you can change the rack to your liking. There is a feeling of use due to appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: 4 hole caps
Main specifications: upper stage and middle height 170 mm, lower stage height 250 mm W574 x H730 x D497 mm
The price has been drastically reduced. 2024/4/26 sales price 19,800 yen ※There is wobble on one side, so it's cheap. This is a speaker stand made by Dinaudio. I definitely recommend it to anyone who has a Dynaudio bookshelf type (Murakoshi Yoichi)
Accessories: none
Main specifications: top plate: approx. 235 x 190 mm base plate: approx. 300 x 245 mm height (spikes included): approx. 660 mm 12 kg
The price has been drastically reduced. 2023/12/11 sales price 15,000 yen*There is no problem with operation, but since it is cheap, it is being delivered as is. Center speaker for the company's STAGE series. Please help build a theater system (Daiki Goto)
Maintenance information: 2023.12.11 operation confirmed
Accessories: instruction manual
Main specifications: 2-way dual 133mm woofer, 25mm aluminum treble unit impedance 6Ω efficiency 88dB W469 x H190 x D220 mm weight 7.95 kg
※Since it is cheap, it will be handed over as is. Comes with a remote control. AM/FM stereo tuner with dual-gate MOS FET on the front end. The tone is bright and natural. There are dirt scratches and threads on the exterior. Serial MZ009520050055 (Tamura Eiji)
Maintenance information: 2024.6.5 operation confirmed
Accessories: remote control, instruction manual, AM antenna
Main specifications: AM/FM stereo synthesizer tuner dimensions W428 x H86 x D295 mm weight 3.2 kg
Sony Theatre System Tallboy Speaker The sweep test is good, but since the corn paper has dents, it is currently sold at a low price. This speaker is easy to use with both front and rear speakers. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.3.18 Operation confirmed
Accessories: nothing
Main specifications: W60 x H1050 x D60 mm bottom 250 mm weight 3.4 kg (actual measurement)
Sony's high-end floor-type speaker. Fine and high-response high frequencies, glossy mid-range, and low frequencies with thick and firm bass lines. There is a sophisticated sense of luxury, and the high-resolution sound source can express a sense of atmosphere and realism. There is a feeling of use on the exterior due to line damage etc. (Tamai Jun)
Maintenance information: 2024.5.30 sound output confirmed
Accessories: Saran net original box
Main specifications: bass reflex 3-way 4-speaker system units used: woofer/200mm cone type x 2 midrange/130mm cone type x 1 tweeter/25mm soft dome type x 1 maximum input 200W 4Ω 88dB playback frequency band 28 to 60,000 Hz W320 x H1080 x D490 mm approx. 57 kg
Speaker for Toshiba's system stereo SL-8 UV. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: saran net
Main specifications: W219 x H360 x D167 mm 2.5 kg (actual measurement)
Currently sold. ADC 10-band graphic equalizer. There are no problems with the current situation, operation, etc., but the current situation is because it is cheap. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: none
Main specifications: W435 x H88 x D222 mm 4.3 kg
The price has been drastically reduced. 2024/5/31 sales price 138,000 yen Manufacturer maintained! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi)
Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment)
Accessories: remote control, power cable, original box
Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
Maintained! LUXMAN 70th anniversary signature model. The standard EL34 push-pull configuration has an OY transformer, and is designed so that you can fully enjoy the flavor of luxe stone. Using an unprecedented high-rigidity chassis, it also has an outstanding sense of luxury. This is a 90s vacuum tube premain with a good balance of range, thickness, and tone. There is a scuff on the front knob. Serial W51010230 (Hiroki Aso)
Maintenance information: 2024.1.13 maintained (2 output tubes replaced due to right channel bias, double channel drive stage socket replacement switch contact disassembly cleaning volume cleaning knob milling deviation correction vacuum tube pin cleaning bias adjustment output audio check, approx. 30W at 8 Ω load)
Accessories: instruction manual copy power cable
Main specifications: output 30W+30W (6Ω) phono (mm) 2.5mV/47kΩ vacuum tube EL34 (6CA7) x 4, 12AU7 x 4, 12BH7A x 2 W430 x H209 x D387 mm weight 22 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of the manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
※ Present sale item. Victor microcomponent system UX-SH5 speaker. Unit unconfirmed because it does not come off the net. Serial 10612Z (Ryuichi Okubo)
Maintenance Information: 2019.2.14 Good Sweep Check
Accessories: None
Main Specifications: 1-way bass reff type W140 × H250 × D134mm Approx. 1.3 kg
*Needle cover missing. Elliptical type with built-in boost transformer. It has a rich, rich sound and sounds like an SPU. Clarity has been improved by incorporating a transformer that creates a well-balanced sound. Although it is an MC type, it can be used in the MM position. The exterior has small scratches, dullness, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.17 sound output confirmed
Accessories: none
Main specifications: MC type transformer built-in elliptical needle output 10 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 32 g
*Needle cover missing. G-shell elliptical needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal cartridge that fully conveys the appeal of analog. There are slight corrosion irregularities on the shell (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
*The headshell is an SPU-G (M) one, but the body is inexpensive because it is GE. Needle cover missing. G-shell oval needle model. The glossy, rich, and heavy sound is attractive without fading. It is an eternal staple cartridge that fully conveys the original appeal of analog. The exterior has rust on the metal parts, and dullness and dirt throughout the body. The needle tip is in good condition (Murakoshi Yoichi)
Maintenance information: 2024.4.17 sound output confirmed
Accessories: none
Main specifications: G shell oval needle MC type output 0.2 mV needle pressure 3 to 4.5 g internal impedance 2 ohms dead weight 31 g
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
The price has been drastically reduced! 2022/5/1 selling price 79,800 yen It is a masterpiece 505J of domestic enclosure. With enough contents and box noise, it is a highly recommended box for those who use JBL. The excellent design unique to vintage is also attractive as an interior. The appearance has damage such as corner chips and abrasions. * The hakama has been removed, and there are no conversion baffles or mechanical plates. (Satoshi Yonejima)
Accessories: lattice net
Main specifications: W475 × H705 × D395 mm approx. 23 kg/book (actual measurement)
Maintained, with remote control! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. There are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.4 Maintained (Electrolytic capacitors were replaced due to faulty capacitors in the power supply unit and motor unit)
Accessories: power supply unit, remote control, copy of instruction manual
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The price has been drastically reduced. 2024/5/15 sales price 118,000 yen Maintained! A famous direct drive machine representative of Technics. The torque is high, the start and stop times are extremely short, and the stable operation that immediately enters constant speed is unique. It also drives LP heavyweights without difficulty. Overall there are small wounds, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.5.15 Maintained (due to disconnection of the FG coil in the motor core, the FG/ angular velocity detection coil was taken out after disassembling the motor core, and the coil pack was rewound. The rotation speed has been reset)
Accessories: copy of instruction manual, power supply
Main specifications: Direct drive aluminum die-cast turntable 33, 45, 78 rotating body W365 x H100 x D360 mm 9.5 kg power supply unit W110 x H85 x D300 mm 3.8 kg
The price has been reduced. 2024/6/4 sales price 780,000 yen A high-performance speaker that condenses the sound production of the multi-cabinet SYSTEM7 into a single cabinet. The balance between dynamism, wide range, and sense of sound localization is excellent. Another advantage is that it creates a sound that is less likely to be affected by the performance of the amplifier. There is a partial tear in the corner of the saran net, and there is a linear paint crack separating the top and bottom on the right side of one (Sasaki Shota)
Maintenance information: 2024.6.3 sweep test is good
Accessories: manual, spike, spike holder, cover
Main specifications: 3-way 4Ω frequency characteristics 29Hz to 22.5kHz 89dB W320 × H1040 × D460 mm 73 kg
※The display is uneven, so it is inexpensive. A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512). Serial A210J41725016630 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio format AAC · AIF · AIFF · APE · FLAC · M4A (Apple Lossless) ALAC · OGG · WAV · WMA · DSF · DFF maximum sampling frequency PCM192 kHz/24 bit · DSD2.8224 MHz (DSD64) W254 × H76 × D360mm weight 4.7 kg
The price has been drastically reduced. 2024/5/3 sales price 99,800 yen Hi-Res compatible USB-DAC, DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
The price has been reduced. 2023/8/12 sales price 19,800 yen speaker cable 1.5m pair single (Y lug) single side (Y lag) single side tri-wire (Y lag) specification A parallel arrangement structure that neutralizes and makes the flow of electricity accurate. A high CP cable that is smooth and has a sense of speed. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2023.8.12 Conductivity confirmed
Accessories: no accessories
Speaker cable, 2.5 m pair, SOS3+ single connection, Y lug specification on both ends, standard model of the company's speaker cable. There is little dramatization, and the sound is light (Kojima Yosuke)
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/29 sales price 138,000 yen Sneaky DSM with built-in network player function and 2ch amplifier has arrived. It has a smart design that eliminates anything superfluous, and can be operated with an iPod or the like. Of course, it also has an excellent external input function. There are some minor scratches on the exterior. Genuine Rin Japan. Serial 1333455 (Tomonori Asaine)
Maintenance information: 2024.3.29 Operation confirmed
Accessories: Speakon remote control power cable setup manual
Main specifications: analog input: RCA1 system digital input: coaxial, 1 optical system, 3 HDMI output, 1 HDMI system*RCA has variable output and fixed output can be changed by setting Compatible files: FLAC, WAV, Apple Lossless, AIFF, MP3, WMA, AAC, OGG Compatible Bits: 16 to 24 bits 33W ✕ 4ch (4Ω) W350 ✕ H54.5 ✕ D215mm Weight 2.3 kg
Mount adapter compatible with 35mm diameter speaker stands. This adapter is used when mounting speakers that do not have a hole in the bottom (Tetsuji Oikawa)
Main specifications: load capacity approx. 30 kg, stand mount diameter: 35 mm, base thickness: approx. 8 mm
※ There is no problem with operation, but since it is cheap, it is currently sold. Panasonic CD player. A CD player that uses a MASH 1-bit DAC and a unique swing arm mechanism. It's a natural sound with no quirks, so you can enjoy it in a wide range of genres. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: frequency characteristics 2 Hz to 20 kHz W430 × H130 × D333 mm 5.2 kg
Direct drive record player equipped with the Orthophone 2M RED as standard. The built-in PHONO equalizer allows direct line connection to an audio device (conventional PHONO input connection is also possible with the back switch). It is also equipped with a simple auto lift-up function (sometimes not compatible depending on the width of the inner groove), so beginners and advanced users can easily enjoy the subsystem deeply. There is a black spot on the start/stop switch (Kojima Yosuke)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: manual, power cable, connection cable, original box, genuine shell, cartridge (2M RED)
Main specifications: Direct drive universal S-shaped tone arm, static balance arm, effective length 230 mm, overhang 15 mm, applicable cartridge, 14.3 to 20.7 g (including headshell) when using auxiliary weights, 18.7 to 25.1 g (including headshell) output terminal/PHONO terminal x 1, PHONO ground terminal x 1, LINE output terminal x 1, LINE output terminal x 1, LINE output terminal x 1, W453 x H169 x D372mm 9.9kg
Maintained! The dust cover is hingeless. A classic record player that Technics is proud of. It is attractive for its simple design, stable operation, and outstanding durability. This model is recommended as an introductory model and as a secondary unit. There is a feeling of use (Daiki Goto)
Maintenance information: 2024.5.13 Maintained (by disassembling the upper and lower mechanism of the arm, wipe off the stuck grease and apply new grease and reassemble. There were no other operation or sound inspection abnormalities.)
Accessories: EP adapter
Main specifications: quartz lock direct drive, full manual type, 33/45 rotation, adjustable pitch control, W453 x H360 x D162 mm, 12 kg
The price has been reduced! 2024/5/12 sales price 148,000 yen A new standard model for the SL-1200 series that inherits the efforts and results that began with the development of the SL-1200G. Outstanding reliability and stability are now available at an affordable price. I'm also happy that it is compatible with 78 revolutions. There is a thread on the dust cover on the exterior (Satoshi Yonejima)
Maintenance information: 2024.5.12 operation confirmed
Accessories: power cord, connection cord, EP adapter, subway, original box
Main Specifications: Direct Drive Turntable System Brushless DC Motor Speed 33 1/3, 45, 78 Universal S-shaped Tone Arm Static Balance Needle Pressure Adjustment Range 0 to 4 g Applicable Cartridge Weight/5.6 to 12.0 g, 14.3 to 20.7 g (including headshell) /when using auxiliary weight/10.0 to 16.4 g, 18.7 to 25.1 g (headshell included) W453 mm x H173 mm x D372 mm approx. 11.5 kg
※This item is currently sold. Onkyo enabled speaker. It is a design that makes it possible to construct a Dolby Atmos sound field using sound reflection from the ceiling. Accessories such as brackets and cables are missing (Sasaki Shota)
Maintenance Information: 2023.12.11 Sweep Test Good
Accessories: none
Main specifications: sealed impedance 6 ohms, playback frequency band 90 Hz to 20 kHz, W120 x H155 x D153 mm, 1.2 kg
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
The price has been drastically reduced. 2024/4/27 sales price 79,800 yen This is a 3-way center speaker with the tuning that best matches the 500, 300, and 100 of the company's Silver series. Since the C350 was designed to pursue only performance without considering size restrictions, the dynamism in terms of sound quality is impressive. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose) original box
Main specifications: 3-way sealed frequency characteristics 40Hz-35,000Hz crossover frequency 830Hz/3,200Hz allowable input 200W recommended amplifier output 80-200W W560×H235×D240mm 14.9kg
The Silver series is used in woofers that use the new DCF technology. The unit, which has the familiar high-speed texture, is stored in a relatively large enclosure. The low range, which has more volume than the size, and the clear mid to high range are attractive. The exterior has a feeling of use such as dullness. Cereals (Tomoho Asaine)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: jumper cable (general purpose)
Main specifications: 2-way bus reflex type frequency characteristics 40 Hz to 35,000 Hz, crossover frequency 2,800 Hz, efficiency 88 dB, impedance 8 ohms, W230 x H375 x D329 mm, weight 9.3 kg/unit
* I checked the sound, but since it is cheap, it will be passed on as it is. 3-way speaker The saran net on both sides does not open, the screws on the back plate are rusted, and the contents are unidentified because they cannot be removed. There are scratches, dirt, and dullness on the exterior (Katsuji Hiura)
Maintenance information: 2022.1.27 sound output check OK
Accessories: Saran net
Main specifications: 8Ω 60W playback frequency band 35-20,000 Hz W360xH790×D290mm 13.25kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/6 sales price 59,800 yen ※1 shelf board is missing and has 3 tiers, and is cheap because there are many scratches. A popular large rack. It is a model that can even adjust the storage capacity and height. It also has high performance as an audio rack, and is made of full-bodied natural wood, with a sturdy structure and interior design. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W1230 x H703 x D563 mm Weight approx. 52 kg
※It is inexpensive because there are many scratches on the whole. Although it is small, it is an attractive car with a low range and medium to high range with a solid core in the middle. Bi-wire compatible It is compatible with a wide range of genres, and is recommended not only for pure audio but also for surround sound (Ryo Mizusaki)
Maintenance information: 2024.6.1 sweep test is good
Accessories: nothing
Main specifications: Bi-wiring compatible anti-magnetic design impedance 6 ohms playback frequency band 33 Hz to 45 kHz output sound pressure level 88 dB dimensions W194 x H326 x D318 mm weight 8.4 kg
※There is no problem with operation, but since it has an air freshener smell, it is inexpensive and is currently sold. A speaker developed in collaboration with European sound designers. It is compact, has good sound, and the soft, gentle treble characteristic of soft dome tweeters is attractive. A model with a wooden cabinet with a calm design that is excellent for space harmony. There are no major scratches that are particularly noticeable on the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: jumper cable
Main specifications: 2 way 2 speakers bass reflex type anti-magnetic design (JEITA) 13 cm cone type carbon fiber woofer 2.5 cm/ soft dome type tweeter impedance 6 Ω output sound pressure level 86 dB dimensions W182xH296xD293 mm weight 8.7 kg/1
※There is no problem with operation, but since it is cheap, it will be handed over as is. A threatening center speaker that supports playback up to 90 kHz. If you are looking for detailed sound, please consider it. Equipped with a direct drive super tweeter. There are 4 corks attached to the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.7 operation confirmed
Accessories: none
Main specifications: 6Ω 80W dimensions W360 x H71 x D163 mm weight 2 kg
TAOC audio board Hybrid structure of melamine veneer, particle board, cast iron powder, and phenolic laminated board. It prevents resonance on the floor and provides stable bass. There is a feeling of use such as scratches on the side of the exterior (Tamai Jun)
Accessories: none
Main specifications: W600 x H40 x D600 mm 11.5 kg
Hamilex (Hayami Kosan) pedestal speaker stand. The direction of the top plate can be changed to vertical/horizontal orientation according to the speaker, and the mounting direction of the struts can also be changed according to the atmosphere of the speaker to be installed. (Fujisawa Yukishi)
Accessories: Instruction manual
Main specifications: Total load capacity 50 kg (1 unit) W350 × D320 × H400 mm Approx. 5.8 kg/unit
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
This wooden speaker stand is ideal for small and medium speakers. The height is 44cm, making it easy to adjust the listening point. A hard urethane cushioning material is attached to the 4 corners of the top plate (Oikawa Tetsuji)
Accessories: none
Main specifications: top plate W340 x D245 mm height 440 mm bottom plate W380 x D 340 mm 5 kg
High position small speaker stand High density compression boards are used, and rigidity can be expected. The round curved silhouette on the front side is also a point. There are abrasions in places (Kojima Yosuke)
Accessories: none
Main specifications: height 500 mm top plate W240 x D270 (W200 x D250) mm bottom plate W280 x D330 mm weight 6.0 kg/book
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill that symbolizes old JBL is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. Serial 2172380ZGD00103 (Fujisawa Yukishi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: power cord
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg
115V specification A power amplifier that is supported by a heavyweight power transformer and reproduces tight low frequency reproduction with good visibility. It shows high cost performance that exceeds size and price. There are small scratches on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 45W+45W (8Ω) 75W+75W (4Ω) W483 × H51 × D295mm 7.5 kg