Yamaha's new compact stereo CC-75 series speakers. Equipped with Yamaha active servo technology that reproduces rich deep bass even though it is small. The exterior has a feeling of use such as dullness and small scratches. Serial 646497Y0 646507Y0 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net
Main specifications: 14cm woofer, 5cm tweeter, 1.1 cm super tweeter impedance 6 ohms, playback frequency band 40 Hz to 20,000 Hz, W200 x H330 x D239 mm, 4.3 kg
A self-made large record player cabinet where Victor's TT-101 was mounted. SAEC's WE-308SX was mounted on the arm. Shipping costs will be estimated separately (Sasaki Shota)
Accessories: none
Main specifications: W630 x H205 x D570 mm, arm hole diameter 43/29 mm, weight 26.2 kg
Unspecified power cable 2.0m. The plug is Panasonic WF5018K, and the connector is made by Global Electronics. This cable is relatively easy to handle. The exterior is dull and has a feeling of use (Takahashi Nobuyuki)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Disposal prices have been reduced. Member discounts are not applicable. 2022/7/10 sales price 4,000 yen. BOSE 301MM Ceiling Mount Bracket I checked the installation, but the specifications seem to be slightly different from the original (Murakoshi Yoichi)
Accessories: mounting screws
Main specifications: Mounting bracket, inner size, 234 x 150 mm, mounting screw position (diagonal), 80 x 80 mm, external dimensions 243 x 350 x 150 mm, 1.35 mm
Comes with original box! JICO's original headshell. A stylish design reminiscent of an SME. Recommended for light needle pressure tone arms. (FUJISAWA KOSHI)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: instruction manual, original box
Main specifications: aluminum stamping dead weight 7.3 g
*1 bottle only Speaker stand with unknown details such as manufacturer name and model. There are appearance, abrasions, and dullness (Hitoshi Kobayashi)
Accessories: none
Main specifications: W280 × H270 × D330 mm 4.8 kg (actual measurement)
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi)
Maintenance information: 2024.5.26 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
Set of 8 Insulator with a two-layer hybrid structure of cork and brass. It can be used for a wide range of purposes, such as small amplifiers and speakers. You can expect bright tones and clear sound images. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure 18 mm in diameter x 11.5 mm in height 18.5 g
Set of 8 brass insulators The compact size is ideal for small speakers and CD players. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: 2-layer hybrid structure; load capacity: 5 kg per piece; diameter: 18 x thickness: 11 mm; weight: approx. 18 g per piece
※There is no problem with operation, but since it is cheap, it will be handed over as is. A threatening center speaker that supports playback up to 90 kHz. If you are looking for detailed sound, please consider it. Equipped with a direct drive super tweeter. There are 4 corks attached to the top plate (Oikawa Tetsuji)
Maintenance information: 2024.4.7 operation confirmed
Accessories: none
Main specifications: 6Ω 80W dimensions W360 x H71 x D163 mm weight 2 kg
HAMILEX speaker stand for small speakers. Recommended for installing small speakers and adjusting the height. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W230 x H150 x D250 mm 2.0 kg total load capacity 20 kg (1 unit)
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
DP-1300M heavy headshell counterweight, set of 2 types, large and small A must-have item for those who use heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. Recommended for those who use a variety of cartridges. There is slight dullness on the exterior (Murakoshi Yoichi)
Accessories: none
Main specifications: Compatible cartridges for their own weight/for 20 to 28 g (small) /for 26 to 37 g (large)
The price has been reduced! 2024/4/28 sales price 5,000 yen set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
Comes with original box! DP-1300M heavy headshell counterweights, set of 2 large and small A must-have item for those using heavyweight cartridges such as SPU and FR. It can also be attached to the DP-500M. It is recommended for those who use a variety of cartridges. There are some scratches on the exterior (Fujisawa Yukishi)
Accessories: original box
Main specifications: Compatible cartridge weight/for 20 to 28 g (small) /26 to 37 g (large)
※Shipping service. Special Feature = All Audio Amplifiers/Latest 96 Model Total Test/2nd Recording Grand Prix Decision/Music and Playback/Audio Diagnosis//Listed Models: NATIONAL/EAS-25HH20 SATIN/M-15, M-15E CORAL/FLAT-5S, FLAT-6S PIONEER/TVX-90, CS-300 TRIO/KL-3060, KL-4060, KL-5080, SANYO/RD-3400, DCX- Published 1300/S45.4.1. The photograph is a sample, so the actual item may be broken or written on it.
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The price has been reduced. 2023/2/10 sales price 5,000 yen. This pan lock is used when storing an amplifier in a wooden case. There are 2 10-inch and 12-inch bracket positions, and amplifiers of 2 different sizes can be attached. The models that can be used are not known here, so please carefully check the target products to be used before purchasing. There is a feeling of use and scratches on the exterior (Hiura Katsutsugu)
Accessories: none
Main specifications: W30 x H110 x D330 mm Weight approx. 400 g
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
* I checked the sound, but since it is cheap, it will be passed on as it is. 3-way speaker The saran net on both sides does not open, the screws on the back plate are rusted, and the contents are unidentified because they cannot be removed. There are scratches, dirt, and dullness on the exterior (Katsuji Hiura)
Maintenance information: 2022.1.27 sound output check OK
Accessories: Saran net
Main specifications: 8Ω 60W playback frequency band 35-20,000 Hz W360xH790×D290mm 13.25kg
Unspecified 3-way enclosure It is a super bargain price with a considerable feeling of use. For experimentation or research, if you are a self-author with confidence in your arm, how about challenging it? (Yoichi Murakoshi)
Main Specifications: W648 x H967 × D457mm 36.8 Kg (Measurement) Woofer opening diameter 300 mm Scoker opening diameter 173mm tweeter opening diameter 102mm
Unspecified wood cabinet. You can see a feeling of use, such as appearance, dullness, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W470 x H134 x D310 mm 2.2 kg (actual measurement)
*Fully automatic player with built-in Denon phono equalizer currently sold. It is recommended for those who want to enjoy records casually without worrying about the location, or for beginners. The exterior is dull and has scratches. Serial 8043308382 (Yonejima Satoshi)
Maintenance information: 2024.1.4 operation confirmed
Accessories: No accessories
Main specifications: fully automatic player belt drive, suitable needle pressure 3.5 g, W360 ✕ H ✕ D370 mm, weight 2.9 kg
Currently sold. This is a self-made 10cm full-range 1-way speaker with unknown details. There is no problem with the sweep or music signal, but the current situation is because it is cheap. There are bond marks on the exterior and center cap, and a feeling of use can be seen, such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.3 sound output confirmed
Accessories: none
Main specifications: W120 x H200 x D122 mm 2.5 kg (actual measurement)
The price has been reduced. 2024/2/24 sales price 6,000 yen ※Since it is cheap, it will be handed over as is. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. The exterior has some holes in creases and threads. Serial Z213158SU (Yonejima Satoshi)
Maintenance information: 2024.2.24 sweep test good
Accessories: instruction manual
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high cut filter, 50 to 150 Hz, continuously variable, W235 x H485 x D409 mm, 14 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
Since the condition is poor, such as cracks in the body, it is currently being sold. A small full-range speaker that is compact, can be placed freely, and has a gentle impression. The sound quality is soft and the sound is relaxed. You can see a feeling of use such as cracks, dullness, and abrasions on the exterior and body (Kobayashi Hitoshi)
Maintenance Information:2023.6.5 Operation confirmed
Accessories: none
Main specifications: full range compact speaker 8ohm maximum input 40W W230 x H150 x D163 mm 1.6 kg
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
※It is currently sold because it is cheap. AM/FM tuner equipped with AM stereo. There is dirt and a feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.4.3 operation confirmed
Accessories: none
Main specifications: W260 x H96 x D336 mm Weight 2.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
*Currently sold. The 13 cm cone-shaped woofer is equipped with an OMF diaphragm made of natural materials, and is specially designed, such as using a German WIMA capacitor for the network, so you can enjoy solid sound with high cost performance. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: saran net
Main specifications: anti-magnetic design 2-way bass reflex woofer 13 cmOMF diaphragm tweeter 2.5 cm soft dome rated impedance 4 Ω maximum input 70 W rated sensitivity level 85 dB/w/m rated frequency range 50 Hz to 35 kHz W170 x H295 x D232 mm 3.8 kg
※Since there are no compatible cartridges, it has not been checked. Audio-Technica SP exclusive replacement needle. For those who use AT-3M, please use it as stock (Kobayashi Hitoshi)
Accessories: original box
Main specifications: 2.5 mil diamond needle, standard needle pressure 2 to 3 g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
It is set directly into the shell to achieve a pattern where records are cleaned at the same time as playing them. There is a feeling of use (Hitoshi Kobayashi)
Accessories: original box, instruction manual
Main specifications: http://www.ebay.com/itm/Vintage-Discwasher-DiscTraker-PRINT-AD-from-1977-/161709875921
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
Denon speaker stand The height can be changed, so it's convenient. If you've been looking for one, please take this opportunity. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: W355 x H535 to 950 (adjustable height) x D309 mm 3.8 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/30 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. There is a feeling of use, such as line scratches scattered on the top plate (Kanai Hidetsugu)
Accessories: none
Main specifications: main body W400 x H220 x D350 mm 5.8 kg (actual measurement) top plate W360 x D320 mm (actual measurement)