The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
The price has been reduced. 2024/2/26 sales price 1,200 yen. Unspecified set of 3 wood blocks A wooden block that feels like Yamamoto Sound Crafts's QB-4 is one size smaller. There is a feeling of use (Takasaki Atsushi)
Main specifications: size approx. W40 x D40 x H40 mm approx. 70 g (actual measurement)
Unspecified set of 2 wood blocks 30mm square insulator cube It is similar to Yamamoto Sound Crafts's QB-1, but it is smaller than the QB-1 and the details are unknown. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Main specifications: W30 x H30 x D30 mm 28.6 g (actual measurement)
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
KIKUTANI guitar stand Comes with a fall prevention strap. There are some abrasions (Yoichi Murakoshi)
Accessories: none
Main specifications: W510 × H760 (maximum) × D330mm
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
Set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
1 pair of unspecified speaker stands Attention can also be seen, such as constructing a metal circular insulator. If you've been looking for this size, go for it. The exterior, paint unevenness, dullness, abrasions, etc. can be seen a lot of feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W450 x H240 x D450 mm 12 kg (actual measurement)
A speaker stand that suppresses standing waves around the speaker by placing the speaker at an angle to the horizontal or vertical direction. Acoustical characteristics can be obtained so that the entire room is enveloped in sound. Comes with exclusive sorbocaine (Kojima Yosuke)
Accessories: none
Main specifications: bottom surface W125 x D125 mm top plate φ60 height 190/145/110/90 mm weight 1.5 to 1.6 kg (actual measurement) /book
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. There is a feeling of use, such as line scratches scattered on the top plate (Kanai Hidetsugu)
Accessories: none
Main specifications: main body W400 x H220 x D350 mm 5.8 kg (actual measurement) top plate W360 x D320 mm (actual measurement)
Unspecified speaker stand. Recommended for 4312 and NS1000M size speaker users. Appearance, dullness, scratches, and a feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Main specifications: main body: W350 x H300 x D330 mm 5.2 kg (actual measurement) Top plate: W320 x D300 mm (actual measurement)
A self-made record cleaner that imitates PAROSTATIK. The core inside is a vinyl sheet wrapped around it. Thanks to the soft core, it is exquisitely comfortable to use. The exterior has a frayed feeling of use (Katsuji Hiura)
Accessories: none
Main specifications: W105mm diameter 30mm weight 9g
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
The price has been reduced! 2017/3/16 sales price 15,000 yen A well-made record cabinet. Details such as the manufacturer are unknown. It is unclear what the phonomotor was mounted on. There are scratches and stains on the dust cover and cabinet on the exterior. (SEKINE Hisashi)
Accessories: No accessories
Main specifications: W550 x H170 x D445 mm hole diameter 20 mm 11.35 kg (actual measurement)
Unspecified record player cabinet. Unprocessed The double arm is also mountable, and the construction is solid. If you've been looking for one, please take this opportunity. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: W602 x H145 x D535 mm 13 kg (actual measurement)
The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior and color are different due to discoloration of the saran net, and overall a feeling of use such as dullness, abrasions, etc. can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: none
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
*Currently sold. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has scratches, threads, and dullness. There is also a dent in the saran net. Serial 108023/089692 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
Comes with a special bracket. The classic 101 mm small speaker. The sound, which has been compiled in one small full-range shot, makes all kinds of popular music sound cheerfully. The exterior has bumps, scratches, and dullness. Serial 9020409, 9020410 (Fujisawa Yukishi)
Maintenance information: 2024.5.3 operation confirmed
Accessories: special bracket, saran net
Main specifications: 1 way 1 speaker impedance 6 ohms maximum input 150 W output sound pressure level 86 db W232 x H154 x D172 mm 2 kg
※The unit has noticeable mold spots, so it is inexpensive. It is a model equipped with a sound diffuser that can adjust directivity characteristics to the listening position while maintaining the quality and ease of use of the 101 series. On the exterior, there are scratches and mold on the unit. Serial 006855/006856 (Tamura Eiji)
Maintenance information: 2024.3.3 sweep check OK
Accessories: saran net, diffuser
Main specifications: 11.5cm full range anti-magnetic type maximum output 150W impedance 6Ω dimensions W232 × H154 × D162 mm weight 2.2 kg
The price has been drastically reduced! 2024/5/9 sales price 49,800 yen This bookshelf is made in England using solid wood veneer for reinforced MDF. The plumpness of the low range has been handed down since the 12th era, and the low range, which has a rich sense of volume, is attractive when it is small. You can enjoy natural sounds suitable for vocals and classical music. The exterior has scratches and several dowels broken in places on the saran net. Serial 00342B (Yonejima Satoshi)
Maintenance information: 2024.5.9 sweep test is good
Accessories: saran net
Main Specifications: Model: 2 Wave Reflex Type Crossover Frequency 2.2 kHz Output Sound Pressure Level 86 dB Rated Impedance 6 Ω Playback Frequency 45 Hz to 28 kHz W205 x H330 x D253 mm Weight 7.6 kg/book
C-Quenze series woofers are in stock from Danish Audio Technology. Strong magnets are combined with soft edges and dampers to produce an amazingly rich finish and firm bass. Serial 26877, 26883 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: aperture: 15 cm, impedance: 8 ohms, output: 120 W, efficiency: 88 dB, outer diameter: 155 mm, depth: 74 mm, opening dimensions: 131 mm, weight: 2.0 kg
The price has been reduced! 2023/5/9 sales price 17,000 yen set of 4. A TAOC speaker stand with a high vibration damping effect. Made from high-carbon cast iron, the speaker system improves pitch, depth, and transparency. Recommended for middle class speakers. There is no felt. The exterior is dull, and there is a feeling of use over time, such as small scratches and rust stains on the bottom (Asae Tomoho)
Accessories: none
Main specifications: W100×H140×D170mm, made of high-carbon cast iron, weight 5.0 kg/1 bottle
Disposal prices have been reduced! (Member discounts are not applicable) 2023/2/5 sales price 10,000 yen ※1 bottle only. DynAudio's classic 17cm cone woofer. It has resolution and is recommended for bookshelves, etc. The urethane on the back magnet side has not deteriorated (Tamura Eiji)
Maintenance information: 2023.2.5 good sweep test
Accessories: There are no accessories
Main specifications: 17 cm cone type impedance 4 ohms diameter 176 mm depth 66.5 mm
*Currently sold. BOSE's high cost performance model for a wide variety of applications. It reproduces sounds unique to BOSE that are powerful and sharp, such as jazz, rock, etc. You can feel the spread of the sound by swapping the position of the tweeter left and right and listening. Overall, there is dirt and a feeling of use. Serial 017958921760022AC, 017958921760021BC (Fujisawa Yukishi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: saran net
Main specifications: 2 way 2 speakers, 8 ohms, maximum input 60 W, W380 x H240 x D170 mm, 3.9 kg
The price has been drastically reduced. 2024/2/12 sales price 89,800 yen ※It has been replaced with a non-genuine edge. You can enjoy voluminous bass with highly efficient and heavy cone paper. It is also durable with a gathered edge, and is also recommended for backload and front load enclosures. There are viscoid sagging marks (Oikawa Tetsuji)
Maintenance information: 2024.2.12 Operation confirmed
Accessories: none
Main specifications: rated input 150 W frequency characteristics 30 Hz to 2 kHz 16 ohms efficiency 96 dB crossover frequency 800 Hz recommended enclosure volume 170 to 225 liters depth 146 mm 7.5 kg
*Since corn paper is coated, it is inexpensive and is currently sold. A 30cm woofer unit attached to representative series from 4311B to 4312MK2. This unit is representative of JBL. It makes me feel the good overhang, which is typical of JBL. How about spares etc. (Oikawa Tetsuji)
Maintenance information: 2024.4.23 Operation confirmed
Accessories: none
Main Specifications: 30cm Woofer Unit Maximum Input: 75W Sound Pressure Level: 89dB Playback Frequency Band: 40 to 3kHz Recommended Cross: ~1.5 kHz Impedance: 8 ohms Diameter 310 x Depth 107 mm 6 kg
Maintained! Professional A version (8 ohm specification) of the LE15. This woofer has good response and allows you to enjoy a dry, tense sound. There is only one unit developed for monitors, and it is a unit that can handle large inputs. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (edge replacement, operation check)
Accessories: No accessories
Main specifications: 38cm cone woofer Alnico 8Ω (measured DC value 7.0Ω/6.9Ω) 150W crossover 800Hz baffle opening diameter 355mm screw pitch (diagonal) 370 mm
A rare JBL 46cm woofer has arrived! The thick sound that can only be produced with a 46cm woofer is attractive. Please try this large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior has tape marks and magic marks on corn paper. Serial 181936/481666 (Sasaki Shota)
Maintenance information: 2024.5.4 sweep test good
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω 99dB frequency range 25Hz to 1.6kHz recommended enclosure volume 140 to 340 lit diameter 464 ✕ depth 212 mm weight 13.2 kg
※1 bottle only. Shorthorn used in the 43 series. It can also be built into an enclosure, but it makes you hear good sound even when attaching a driver and placing it on top of the enclosure. There are paint peeling and scratches on the exterior (Yonejima Satoshi)
Accessories: No accessories
Main specifications: 80 degrees horizontal orientation for 1-inch drivers, 45 degrees vertical, recommended crossover 1.2 kHz, baffle opening diameter 108 mm, depth 216 mm
The price has been reduced! 2024/5/20 sales price 148,000 yen JBL large horn set 2360H and 2360T. It's perfect for those who want to experience the intense and open sound of a horn. A self-made mounting stand is also included, so you can quickly attach it to the enclosure. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Hiroki Aso)
Accessories: self-made stand
Main specifications: 2360H 2 inch driver radial horn recommended crossover 500 Hz overall size W792 x H786 x D894 mm weight 18.2 kg (actual measurement)
※Chips and oxidation are conspicuous in the horn part, so it is inexpensive. A tweeter representing JBL. It gives an expression with a greater sense of depth and breadth than 075. It has a punchy, dynamic sound quality, and is a model unique to this era that excelled in characteristics such as a sense of attack and horsepower. The exterior has dullness, rust, and scratches due to aging. Serial 33996/33998 (Yonejima Satoshi)
Maintenance information: 2024.5.13 good oscillator test
Accessories: No accessories
Main specifications: horn type ferrite magnet playback frequency band 2,500 to 15,000 Hz impedance 8 ohms output sound pressure level 110 dB diameter 119 x depth 94 mm weight 2.4 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 60878/74750 (Tamura Eiji)
Maintenance information: 2024.5.18 Maintained (diaphragm installation adjustment. Pad dampener, mounting screw rust replacement Wiring terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning, internal wiring cable replacement. DCR (74750/6Ω diaphragm no scratch) DCR (60878/5.7Ω diaphragm no scratch))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has rust and paint peeling due to aging. ※The diaphragm is DR16R2421. (YONEJIMA Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. This is a genuine diaphragm, but it comes with DR16R2421. DCR (A/7.1 ohm diaphragm scratch) DCR (b/6.3 ohm diaphragm scratch))
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms, 118 dB, frequency characteristics: 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg/piece
※1 bottle only. The diaphragm has been replaced with a D8R2421. It is an 8 ohm specification. Maintained! The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance with various woofers and tweeters. The exterior has dullness and small scratches. Serial 23890 (Yonejima Satoshi)
Maintenance information: 2024.5.25 Maintained (diaphragm installation adjustment, pad dampener, mounting screw rust replacement. Material terminal contact part cleaning, terminal dirt cleaning, insulation bushing replacement. Diaphragm dirt cleaning. (This is a genuine diaphragm, but it comes with D8R2421)
Accessories: No accessories
Main specifications: 1 inch driver, throat diameter: 25 mm, 8 ohms (3.8 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The classic model for professional 1" screwdrivers. It is installed in many of the company's 43 series, etc., and it is a driver that is easy to balance even when combined with various woofers and tweeters. There is a feeling of use due to appearance, dullness, small scratches, abrasions, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.24 sound output confirmed
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
The price has been reduced. 2023/10/6 sales price 29,800 yen ※Since it is only 1 bottle, it is cheap. JBL professional 2" screwdriver. It is an item that continues to be used in large horn systems, etc. The quality unique to titanium diaphragms, the breathing of the vocals, and the high hat on the drums are all appealing, and the outstanding realism is appealing. The exterior has dullness, dirt, and scratches. Serial 31316 (Tamura Eiji)
Maintenance Information: 2023.10.6 Oscillator Test Good
Accessories: no accessories
Main specifications: slot diameter 5 cm, allowable input 100 W, sound pressure level 111 dB/W/m, frequency characteristics, 500 Hz to 20 kHz, crossover frequency, 500 Hz or more, 16 ohms, diameter 235 x depth 132 mm, 13.6 kg/1
Comes with a 2447 special horn! A coherent wave structure is used for the phase plug. It is designed so that the phase plug can be connected directly to the horn throat. A titanium diaphragm is used. You can see the exterior, dullness, dirt, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: stand
Main specifications: Throat diameter 3.8 cm 16 ohms Frequency characteristics: 500 Hz to 20 kHz
The price has been reduced. 2022/7/4 sales price 12,000 yen 2.5mm plug specification for genuine balance cable for IER-Z1R. Shafts have been exchanged with perfect accuracy. If you have an DAP with a 2.5 mm balance terminal such as Astell&Kern, this is for you. (SASAKI Shota)
Maintenance information: 2022.7.4 sound output confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/12/1 sales price 298,000 yen Interior and exterior refreshment maintenance has been completed and brushed up! A consumer model of the 2S-305, a timeless monitor speaker masterpiece that Japan is proud of. The thick and clear midrange and detailed high frequencies, which cannot be felt with the look, vividly reproduce vocals. The sound that accurately expresses the characteristics of an amplifier that is set regardless of whether it is a vacuum tube or transistor makes me feel the goodness of the device I have on hand that I haven't been able to see until now. The exterior is in perfect condition due to maintenance. Serial 351364 4851370 (Yamato Yuki)
Maintenance information: 2023.12.1 Maintained (exterior polishing, oil finish, exterior repair, front and rear baffle painting to create missing parts, saran net replacement, velcro replacement. Woofer maintenance center adjustment, edge damping agent application, disconnection solder treatment, center cap dent correction. Tweeter maintenance center cap internal cleaning and replacement, center adjustment, corn paper edge crack repair, edge damping agent application, unit detachment. Network maintenance frequency characteristics check, ATT contact cleaning, terminal cleaning sound operation confirmed)
Accessories: saran net
Main specifications: 2 way bass reflex system input impedance 8 ohms output sound thickness level 96 dB crossover frequency 1500 Hz W650 × H880 × D445 mm weight 50 kg
Self-made enclosure. The previous owner attached a JBL 38cm unit with a 1" driver and used it in 2 ways. It comes with casters. There is a lot of feeling of use, such as uneven paint. Please contact us for shipping (Murakoshi Yoichi)
Accessories: none
Main specifications: W500×H790×D604mm 53.4 kg
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
Set of 4 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior is dull and has small scratches (Murakoshi Yoichi)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book