The price has been reduced. 2024/6/15 sales price 16,800 yen VM520EB model with head shell AT-HS10. Uses a bonded elliptical needle and aluminum pipe cantilever to reduce tracing distortion and extract accurate information. High frequency sensitivity and amount of information shine (Tomoho Asaine)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: original box head shell AT-HS10
Main specifications: VM type playback frequency range 20 to 23,000 Hz output voltage 4.5 mV (1 kHz, 5 cm/sec.) Channel separation 27 dB (1 kHz) output balance 1.5 dB (1 kHz) needle pressure 1.8 to 2.2 g (2.0 g standard) coil impedance 2.7 kΩ (1 kHz) DC resistance 800 Ω load resistance 47 kΩ mass 16.8 g (6.4 g for VM520eB only)
The disposal price has been reduced! (Member discounts are not applicable) 2023/5/9 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yamato Yuki)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check. (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: power cable
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The price has been reduced. 2024/6/16 sales price 378,000 yen A new-generation premain amplifier that integrates the performance of a reference separate amplifier into one housing. All stages are balanced from input to output. The smooth tone in the mid to high range is impressive, and it beautifully reproduces vocals, strings, etc. The bass also has a sufficient sense of volume, and the sense of scale is perfect. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 200W+200W (8Ω), 400W+400W (4Ω) playback frequency band 5Hz to 50kHz input: PHONO (MM, MC) 1 system, 4 analog systems W440 x H168 x D453 mm 21.5 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/6/8 sales price 450,000 yen Both the interior and exterior were maintained in June 2021! ALTEC CRESCENDO equipped with a 604E. It has an elegant, furniture-like look designed for use in the home, and stands out from Altech. As for the sound, the good localization unique to coaxialism and the small multi-cellular horn give off the good sense of sharpness typical of Altec, so you can enjoy a crisp American sound. The center cone of the unit is slightly different on the left and right. ATT Gari remains (Takasaki Atsushi)
Maintenance information: 2021.6.15 Maintained (exterior repair/color loss painting/hakama repair, front baffle repair/paint processing trolley removal/hole filling repair, saran net repair/reinforcement unit maintenance (low range: one-sided edge crack repair/dumping agent application, edge repaired/center adjustment, high range: magnetic circuit slit cleaning/center adjustment, cleaning in various places) Removed aluminum seals that do not require unit detachment Terminal wiring related retreatment idle rotation prevention treatment re-fix unfixed internal coils with silicon ATT contact cleaning. Since the wiring is broken at the root of the resistor, an exchange frequency characteristic measurement check (~ 42 kHz) is performed, and the original capacitor is continuously used for good results, input/output waveform and balance confirmation sound output check)
Accessories: saran net
Main specifications: frequency characteristics 20 to 20,000 Hz use unit 38 cm, 604E (coaxial type with built-in horn) network N-1500-A maximum input 50 W output sound pressure level 97 dB crossover frequency 1.6 kHz impedance 16 ohms W690 x H1,018 x D485 mm
The price has been reduced. 2024/6/16 sales price 298,000 yen The sound is enveloping, and there is sex appeal in the glossy mid-high range. It also excels at reproducing acoustic instruments, so you can enjoy vivid playback sound. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 Operation confirmed
Accessories: saran net, spikes, original box
Main specifications: rear bass reflex type frequency characteristics 28 Hz-22 kHz 91 dB 4 Ω crossover 110 Hz, 2,500 Hz W190 x H1085 x D400 mm 32.5 kg
Maintained! This is the ES series flagship model premain amplifier with a highly durable design and balanced input. The bass with a well-centered center of gravity, where you can feel a natural sense of temperature, and delicate, and careful mid and high tones create an overall well-balanced tone. There is deformation and dents in the lower left corner of the front panel, and there are small scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.6.16 maintained (push slide SW disassembly contact polishing and cleaning grease application, speaker relay deterioration replacement, INPUT selector SW 2 disassembly contact polishing cleaning, speaker switching SW disassembly contact polishing cleaning, Cartrich MM/MC switching SW disassembly contact cleaning, other DC balance DC bias adjustments, and sound output for each input/output connection will be confirmed.
Accessories: copy of the manual
Main specifications: effective output 80W+80W (8Ω) 100W+100W (6Ω) 120W+120W (4Ω) phono (MM/MC) dimensions W430 x H175 x D450 mm weight 19.8 kg
The definitive edition of the Orthophone MC transformer. Comes with an MC/MM switcher SW, so you can switch easily. The rounded, warm sound quality is attractive. There is a small dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: none
Main specifications: boost ratio 27dB (3Ω, 47kΩ, 1kHz) input impedance 2Ω to 6Ω load impedance > 47KΩ channel balance <0.5dB frequency characteristics 10 to 100 kHz W153 × H95 × D110 mm 1.36 kg
※Inexpensive because it has a cigarette smell and dirt. Comes with a self-made stand. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. The exterior is corroded and dull, and although it has been cleaned, tobacco smell and dirt cannot be removed (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms, crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/bottle
192 kHz 24 bit D/A converter. The sound image has a clear tone, and it is a high performance model that can also be used as a headphone amplifier. There is a dent on the front panel (Oikawa Tetsuji)
Maintenance information: 2024.6.16 Operation confirmed
Accessories: power cable only
Main specifications: 2 channel 24-bit 192 kHz compatible D/A conversion input 3 systems (coaxial, XLR, optical) W205 ✕ H45 ✕ D240mm 1.6 kg
Rhodium plated The PSE standard cable clamp part was changed from conventional resin clamps to special stainless steel, which is heavy and has excellent damping properties. This effective vibration countermeasure maximizes the potential of the device (Oikawa Tetsuji)
Accessories: none
High end outlet plug. The socket blade is a hybrid high-durability plug with palladium 0.3 microns plated on 3 microns of gold.
Accessories: nothing
Main specifications: cable compatible outer diameter up to 15 mm, wire compatible diameter up to 2.0 SQ
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
It is inexpensive because it leaves a cigarette smell. This is a carbon record mat. The fine vibrations transmitted from the turntable are reduced, the sense of silence is increased, and the sense of sound image is improved (Sasaki Shota)
Accessories: none
Main specifications: diameter approx. 295 mm, thickness 4 mm
The high-quality textured design of KOJO TECHNOLOGY's “Virtual Earth” top cover with a satin white anodized finish is also attractive. From the popular old model FORCE BAR EP, you can feel not only an increase in surface area, partial material changes, and S/N improvements, but also improvements in fineness (Sasaki Shota)
Accessories: original box, manual, connection cable
Main specifications: W80 x H35 x D111 mm, weight approx. 775 g
Maintained! Accuphase first generation power amplifier. Unlike today's company's tone, the wild sound with a strong punch is attractive. It goes well with jazz and rock. The exterior has line marks and dullness. Serial L6T748 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (input volume, output relay, semi-fixed VR, etc. replaced due to foot rattling, etc., replacement, etc., switch cleaning card, edge contact cleaning, solder correction, wiring restyling. Bias and offset check output voice check internal cleaning. Note: The MAIN&REMOTE1 speakers are connected in series. (There is no sound unless both speakers are connected)
Accessories: copy of instruction manual, power cable
Main specifications: rated output 150 W/ch frequency characteristics 20 Hz to 20,000 Hz W445 × H152 × D355 mm 25 kg
HAMILEX speaker stand. Depending on how the connection plate is attached, the width is 330 mm and 300 mm, and installation is possible by changing the direction of height and depth. It's just the right size for a medium sized speaker such as the Yamaha NS-1000M. There is a scratch on the bottom of the exterior (Yonejima Satoshi)
Accessories: No accessories
Maintained by the manufacturer! Luxman CD player with a soft sound. It's easy to hear even when you listen for a long time, and you won't feel tired from listening. It is also recommended to use it in total with L-505s and L-507s of the same age. The exterior is slightly scratched and slightly torn. Serial M90110760B (Fujisawa Yukishi)
Maintenance information: 2024.6.14 manufacturer maintained (replaced due to loading belt deterioration. Tray rail, grease up. Pickup lenses, cleaning. remote control, internal cleaning, general adjustment)
Accessories: remote control, power cable
Main specifications: HDCD playback compatible analog output, 1 RCA unbalanced system, 1 XLR balance system, 1 digital output, 1 coaxial system, W467 x H144 x D396 mm, 9.5 kg
Maintained by the manufacturer! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. The exterior is dull and small scratches can be seen. Serial 25633 (Yonejima Satoshi)
Maintenance information: 2024.6.16 manufacturer maintained (16 transistors replaced. Rotation switch/power switch micro SW replacement. Leaf spring SW cleaning, speed adjustment. (Other inspection of each part, operation test)
Accessories: No accessories
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
Maintained! Adjustable 3-way channel divider Crossover frequencies for LOW/MID 4 and MID/HIGH 4 stages can be selected. Furthermore, it is equipped with a FLAT position. It is possible to switch between 200/400/570/800 Hz and 2500/3500/5000/7000 Hz. There are small scratches and corrosion on the exterior. Serial 141628 (Yonejima Satoshi)
Maintenance information: 2024.6.16 Maintained (replacement of deteriorated capacitors in the circuit. Power circuit transistor replacement. Switch and volume contacts corrected. I/O pin jack polish (This is a specification because each switch only makes a low sound when FLAT)
Accessories: No accessories
Main specifications: W408 x H134 x D280 mm weight 5.4 kg
Please note that since the CSE power cable is a 2.0m power control terminal for outlet taps, it cannot be used with normal devices. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.16 continuity confirmed
Accessories: original box
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Murakoshi Yoichi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: mounting screws
Main specifications: aluminum stamping dead weight 8g
The dust cover is missing. ROTEL record player. It is also recommended for those starting out with semi-automatic audio. Also, the design that blew through is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 maintenance (belt replacement, arm operation, voice check)
Accessories: cartridge
Main specifications: W436 x H130 x D350 mm 4.8 kg (actual measurement)
Equipped with a titanium-coated 7th generation Uni Q driver. Atmospheric sound quality with a wide range. It comfortably plays vocals, chamber music in small groups, etc. Exterior, there are only 3 banana red and black caps on the SP terminal, and in addition to the jumper cable being general-purpose, there is a feeling of use such as dullness (Kobayashi Hitoshi)
Maintenance information: 2024.6.15 sound output confirmed
Accessories: saran net, spikes, jumper cables (general-purpose products)
Main specifications: 3-way 3-speaker frequency characteristics 40Hz to 40kHz W220 x H865 x D372 mm 14.5 kg
The company's classic front-load enclosure. The sound skips well, and it sounds crisp even with heavy units. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: front road horn system/floor type enclosure compatible speakers 2205, 2220, etc., minimum playback frequency 60 Hz, W752 x H914 x D610 mm, 46 kg
It has been replaced with a cloth edge. Currently sold. Onkyo's 3-way bookshelf speaker The stretchiness of the mid-high range, which is typical of Onkyo, makes me feel comfortable listening to vocals. You can see the exterior, dullness, abrasions, etc. and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.14 sound output confirmed (replaced with cloth edge)
Accessories: saran net
Main specifications: 3-way bass reflex 6Ω 91 dB W380 x H670 x D363 mm 34 kg
Manufacturer maintained, including pickup replacement! A CD player with a simple design, good cost performance, and easy for beginners. It is equipped with 10 keys that are convenient for station selection. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.13 manufacturer maintenance (loading belt/tray opening/closing SW exchange, laser pickup replacement, inspection of other parts, sound test)
Accessories: none ※remote control missing
Main specifications: 2 analog outputs (variable, fixed), 2 digital outputs (OPTICAL, COAXIAL) W433 x H115 x D288 mm 6.3 kg
It inherits the power supply technology that achieves high speed responsiveness and high signal-to-noise ratio developed with the Technics premium Primain SU-R1000. It's a tuning that you can listen to with peace of mind regardless of genre with responsive low frequency playback with strong speaker driving power. There is also a PHONO input compatible with MM/MC cartridges, and the fact that it is compatible with various sound sources and peripherals from analog to digital is attractive because it has excellent cost performance. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: 70W+70W (8Ω) phono MM/ MC compatible PC input: back USB B type connector x 1 digital input: optical square terminal x 2, coaxial digital input W430 x H148 x D428 mm 12.7 kg
High sound quality floating board with a combination of special springs and wires. The turbidity of the sound almost completely disappears, and the sound field expands greatly without stress. Significant sound quality improvement effects can be expected on speakers, record players, amplifiers, etc. (Tomoho Asaine)
Accessories: none
Main specifications: size 350 x 450 mm height 58 (± 2) mm weight 6.0 kg
Set of 4 banana plugs High sound quality solderless (no solder). This is a banana plug with a screw fastening system. It is an orthodox and easy to use plug. The exterior is generally good (Hiroki Aso)
Accessories: original box
By placing this plate between the audio device and the stand, it will be transformed into a high-resolution sound without colorization. It has excellent silencing, repulsive elasticity, impact resistance, etc., and leaves the necessary sound while suppressing excessive vibrations in audio devices. The exterior has small scratches, abrasions, etc. (Hiroki Aso)
Accessories: none
Main specifications: size W400 x D220 x H8 mm weight 0.68 kg
※The spikes are out of stock, so it's cheap. It is an audio isolation board that combines soft materials and hard materials to absorb unnecessary vibrations (resonances). The flat full-band characteristics improve the resolution of all bands and faithfully express subtle sound nuances. There is a feeling of use on the exterior, such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: W500 x D450 x H20 mm with 5 cone spike mounting holes on the back.
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W375 x H60 x D475 mm weight 6.0 kg (actual measurement)
High sound quality floating board with a combination of special springs and wires. A special coating with high friction is used on the board surface. Sound quality improvements can be expected from all devices such as speakers, record players, and amplifiers. There is a feeling of use, such as small scratches scattered around (Asae Tomoho)
Accessories: none
Main specifications: size W210 x H58 x D297 mm weight 2.2 kg (actual measurement)
HAMILEX speaker stand. Depending on how the connection plate is attached, the width is 330 mm and 300 mm, and installation is possible by changing the direction of height and depth. It's just the right size for a medium sized speaker such as the Yamaha NS-1000M. There is a feeling of use on the exterior such as scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: Speaker stand W300 (330) x 250 x 300 mm, weight 5.4 kg/unit
※1 sheet only. Perfect for column-type tall boy speakers or bookshelf speakers placed on a stand. Even though the whole thing adheres closely to the floor, the angled edge allows it to spread throughout the room without stopping the sound with the board (Asaine Satoshi Law)
Accessories: none
Main specifications: laminated bamboo, 3 layers, size W330 x H20 x D 380 mm, weight 1.4 kg
Comes with original box! This bookshelf speaker has an attractive sense of scale and volume of bass that cannot be achieved with speakers of the same size. The high range also uses a beryllium tweeter, so there is no cloudy sound and the tone is clear and bright. Overall, a model with excellent cost performance. Also, the design is excellent, and there is no doubt that it will look great as an interior decoration. In addition to dullness and small scratches on the exterior, there is a feeling of use such as dents and cracks. Serial B0871037 B0871037 (Hiroki Aso)
Maintenance information: 2024.6.16 sound output confirmed (good sweep test)
Accessories: Saran net jumper plate original box
Main specifications: 18 cm cone woofer 3.1 cm beryllium tweeter playback frequency band 42 Hz to 35,000 Hz impedance 8 ohms output sound pressure level 87 dB external dimensions W260xH390xD430 mm weight 17.2 kg
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
A sound control panel that adjusts the sound field by absorbing and scattering sound. Not only can it adjust rooms with sound problems, such as dead rooms, etc., it also has the effect of expanding the sound field space in various rooms. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Main specifications: dimensions: width: 587 x height: 1200 x depth: 29 mm; weight: approx. 5.2 kg/sheet
A long-selling model equipped with a USB-A terminal. Compared to other models in the same class, it is popular for its slightly thicker sound that is pleasant to listen to. Music files can be played directly by connecting to an iPod/iPhone, WMA, MP3, or a USB memory with recorded files. There is a feeling of use such as slight dullness and small scratches. Serial 4106605687 (Jun Tamai)
Maintenance information: 2024.6.16 sound output confirmed
Accessories: Remote control instruction manual copy
Main specifications: size W 434 mm x H107 mm x D 273 mm weight 4.1 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/25 sales price 298,000 yen A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
Genuine Electri While being clear and precise, this is a powerful machine that also has the thickness and intensity of sound of successive Macintosh control amplifiers. It is a famous machine with a deep sense of nostalgia that is compatible with both vintage and modern models. Using the familiar 5-band equalizer, it is also possible to change the desired tone depending on the song. The exterior has blows, line scratches, and repair marks. Serial JHD3514 (Fujisawa Yukishi)
Maintenance information: 2018.8.30 Maintained (main volume, balance volume, etc. Contact cleaning. Switch contact cleaning. Head amplifier section and EQ volume circuit capacitor replacement. Power cord replacement. (Check the operation of each input/output)
Accessories: No accessories
Main specifications: built-in monitor amplifier with 5-band equalizer (20W x 2/8Ω), compatible with balanced input/output, PHONO (MM) compatible, W468 x H183 x D432 mm, 12 kg
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
Pioneer carbon fiber molded headshell. Simple and easy to use design. It is also attractive that it has a slightly lighter weight and is easy to combine. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: carbon fiber molding dead weight 9.5 g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well. ※The lead wire is not original. (FUJISAWA KOSHI)
Maintenance information: 2024.6.15 continuity confirmed
Accessories: No accessories
Main specifications: dead weight approx. 13g
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole
Disposal price reduction. Member prices are not applicable. 2024/3/12 sales price 8,000 yen set of 4. 140mm pole (19mm diameter) black pole Please use it when adding shelves such as Q4 or Q4D. The exterior has dullness and small scratches (Mizusaki Ryo)
Accessories: none
Key Specifications: 140mm length/19mm diameter optional pole