Maintained by the manufacturer. The third generation of the Denon 2000 series. Frequency characteristics have been improved and low noise has been achieved by reviewing power parts, volume circuits, etc., while keeping the low frequency range with a sense of volume unique to the company and the high frequency range with elongation unchanged. Of course, it is a big hit model that is compatible with modern sauces, and doesn't make you feel that it's poor to listen to old sources. There are abrasions on the exterior and volume, and dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 manufacturer maintained (1 PSW rework, 12V relay, function SW replacement. (Amplifier board inspection, solder correction, operation confirmation test)
Accessories: instruction manual, power cord
Main specifications: output 80W+80W (8Ω) PHONO (MM/MC) bi-wiring compatible W434 x H180 x D478 mm 22 kg
It was maintained in 2019. A special edition of the PM-80. A popular Marantz model from the 90s that has both luster and strength. This is a geeky model where you can enjoy the difference in tone by switching between A grade and AB grade. There is a feeling of use, dullness, and small scratches. Serial MZ009046030013 (Murakoshi Yoichi)
Maintenance information: 2019.7.11 maintenance completed (speaker relay replacement, source/TAPE switch push button SW6 wear replacement, other MM/MC switching SW/INPUT selector switch SW disassembly contact polishing cleaning, idling CLASS A · B confirmation adjustment, confirmation of solder cracks on each board, partial repair, confirmation of sound output for each input/output connection)
Accessories: instruction manual (copy)
Main specifications: AB class 100W+100W (8Ω) A grade 20W+20W (8Ω) size W454 x H165 x D380 mm weight 17.5 kg
The price has been drastically reduced. 2024/2/18 Marantz pre-main amplifier with sales price 89,800 yen. The preamp circuit has been revamped to enhance spatial expression ability and detail reproducibility. Similar to the PM-10 and PM-14S1, a highly accurate electronically controlled volume is used for the volume circuit. It makes it possible to reproduce bass that combines a sense of scale and instantaneous power. Serial AWY15180500756 There are scratches on the top plate on the exterior (Hiura Katsuji)
Maintenance information: 2024.2.18 Operation confirmed
Accessories: remote control power cable
Main specifications: 100W+100W (4Ω), 70W+70W (8Ω) frequency characteristics 5Hz-100kHz
W440×H128×D379mm 12.0kg
※It smells like air freshener, so it's cheap. Marantz pre-main amplifier with excellent cost performance. The sturdy, heavy construction is unique to the heyday of audio. Class A operation can be switched, and both design and sound quality are unique to that time (Yasuhito Koshihama)
Maintenance Information: 2020.4.4 Maintained (Confirmation Symptom: The power does not turn on. Action: Power supply board repair correction. Fixed due to soldering deterioration in the main amplifier circuit and other circuit boards. Remote wire switch disassembly contact polishing. Bad output relay contact replacement. (I/O pin jack polish)
Accessories: none
Main specifications: 20W+20W (when grade A) 100W+100W (when AB grade) W454 x H165 x D380 mm 17.5 kg
Maintained! A pre-main amplifier with Class A operation that allows you to enjoy sharp sound. The moderate amount of extrusion is comfortable, and this model is suitable for jazz and rock. The exterior has small scratches and dullness appropriate for the model year (Daiki Goto)
Maintenance information: 2024.1.22 maintained (balance volume (replacement) replacement, output relay replacement, input selector, reck-out, MM/MC switching, MONO, loudness, CD direct switch disassembly polishing grease application, solder repair, other volumes, switch cleaning, internal inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 100W+100W (8Ω) input 6 systems PHONO (MM/MC) quarter A amplification method using CD/PHONO direct switch W462 x H164 x D376 mm 14.3 kg
The price has been reduced! 2024/5/29 sales price 89,800 yen Hi-Fi pre-main amplifier for the network & streaming era. Network playback of high-resolution sound sources (up to DSD 5.6 MHz, PCM192 kHz/24 bit) and streaming services such as Amazon Music, AWA, and Spotify can be performed without using an external player, etc. The exterior is good with no conspicuous scratches. Serial BLP27191000468 (Yonejima Satoshi)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: remote control, instruction manual, power cord, antenna
Main specifications: rated output 60W+60W (8Ω) streaming (Amazon Music, AWA, Spotify, etc.), internet radio, high-resolution file playback compatible W440xH125xD379mm (when the antenna is laid down) W440 x H190 x D379 mm (when the antenna is erected) mass 10.8 kg
The price has been drastically reduced. 2024/5/12 sales price 99,800 yen It has a well-balanced connection between all bands and a good sense of localization, and the three-dimensional grasp of sound is simple and can be reproduced with high quality. I think the AV settings are good along with the other Platinum series, but I think you can enjoy it regardless of genre even with 2CH as it is. There are 2 dents on the exterior and top plate, and a feeling of use can be seen such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.10 Operation confirmed
Accessories: zipper cross grill
Main Specifications: Input 20-150W Allowable Input (RMS) 75W Maximum Allowable Input (Instantaneous) 300W Efficiency 87dB (1W/1m) Impedance 8Ω Frequency Characteristics 40Hz to 20kHz (-6dB) LF (Woofer) 165 mm (6.5 inch), Multi-fiber Paper Cone MF (Mid) 165 mm (6.5 inch) HF (Tweeter) 25.4 mm (1 inch) Silk Dome Tweeter Crossover Type 3 Way, low loss passive type, hardwired crossover frequency 350Hz, 2.5kHz enclosure type bass reflex W235×H1,078×D300mm 17.1 kg
The price has been reduced. 2024/6/4 sales price 398,000 yen*Inexpensive because there are noticeable scratches on the front. Player system with SME3010R mounted on Luxman PD-171AL! Popular MC cartridge SPUs can also be attached. The combination of the latest high-end machines and high-end arms makes it a player that excels in the amount of information with Japanese precision and a reliable skeleton. It is one that brings out the characteristics of cartridges to the greatest extent with precise sound (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: power cable, instruction manual
Main specifications: [PD-171AL] belt drive AC synchronous motor quartz lock oscillator amplifier turntable · machined aluminum surface finish · diamond cut weight 5.0 kg rotation speed 33 · 45 rpm W492 ✕ H140 ✕ D407 mm weight 23.8 kg
The disposal price has been reduced! (Member price not applicable) 2024/5/26 sales price 298,000 yen Current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
A plug adapter that converts a micro jack to a stereo mini plug. It is convenient for converting plugs into headphones, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: total length 8 cm
Micro jack to stereo mini plug adapter It is used when converting a micro plug to a stereo mini plug. There are cracks in the plastic packaging due to aging (Murakoshi Yoichi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: package
The price has been reduced! 2024/6/2 sales price 49,800 yen High power amplifier using a fully balanced Class D amplifier. The high output of 300W and plenty of driving power are attractive. It reproduces PC audio with low distortion and wide range. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, power cord, adapter, original box
Main specifications: 300W×2 (4Ω) 165W×2 (8Ω) W200×D155×H41mm 0,7kg
Compatible needle for ONKYO OC-39 It is unopened and operation has not been checked (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: The needle pressure seems to be 2g.
Compatible needle for ONKYO OC-36M It has not been opened, and operation has not been confirmed (Murakoshi Yoichi)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Main specifications: The needle pressure seems to be 2.0g.
Replacement needle for ONKYO Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
The price has been reduced. 2024/5/16 sales price 64,800 yen A woofer unit equipped with an SMC magnetic circuit that achieves significant reduction in distortion by adopting SMC material (soft magnetic compound) for the pole piece part of the magnetic circuit is mounted. You can enjoy the small yet highly textured sound of Dali. There are dull stains on the exterior and edge cone paper, and a feeling of use such as dullness and small scratches can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: saran net
Main specifications: 4Ω 87dB4 59Hz to 27kHz W195xH351xD297mm 7.8 kg
An Onken (Onken) style 38cm enclosure with an impressive bass reflex lined up on both sides. It adds thickness to the low frequencies and makes full use of the umami of the sound. Originally, the ALTEC 515B is mounted, and it is an enclosure that I want to assemble with a horn system to make it sound firmly. There is quite a feeling of use such as dirt, etc., and some broken screws. (Takasaki Atsushi)
Main specifications: W800 × H1023 (including casters) × D500mm Mounting hole diameter 345mm Screw pitch (diagonal) 372mm Width between splints on the back of the front baffle 410mm (actual measurement) 79.6 kg (actual measurement)
The price has been reduced. 2024/5/17 sales price 45,000 yen There is a slight gap in the volume, and it will be sold as is. The mid-range is thick and powerful, and it is characterized by analog-like sound quality with a moderate sense of range. It effectively gently relaxes hard sound CD players. The characters on the panel display are slightly off, and the 48khz lamp is misaligned in the back (Takasaki Atsushi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: copy of the manual
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Yamaha's new compact stereo CC-75 series speakers. Equipped with Yamaha active servo technology that reproduces rich deep bass even though it is small. The exterior has a feeling of use such as dullness and small scratches. Serial 646497Y0 646507Y0 (Takahashi Nobuyuki)
Maintenance information: 2024.6.3 operation confirmed
Accessories: saran net
Main specifications: 14cm woofer, 5cm tweeter, 1.1 cm super tweeter impedance 6 ohms, playback frequency band 40 Hz to 20,000 Hz, W200 x H330 x D239 mm, 4.3 kg
※Since it is cheap, it is currently sold. This is a thin center speaker. Since it has an anti-magnetic design, this model is easy to use and easy to combine with other speakers. Recommended for those who are building surround sound for the first time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual, connection cord, original box
Main specifications: 2 way, 3 speakers, bass reflex system, center type, anti-magnetic design, playback frequency band 60 Hz to 20 kHz, 88 dB, 6 ohms, allowable input, 40 W, W435 x H100 x D221 mm, 2.2 kg
The price has been reduced. 2024/5/7 sales price 29,800 yen This item is currently sold because dirt, tobacco smell, and feeling of use are conspicuous. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/5/16 sales price 9,800 yen*Currently sold, it is cheap because it is in poor condition. This model has a nicely looking model with units arranged in the center. It has excellent sharpness from low to high frequencies, and is perfect for those who listen to pop music. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 105025A 105025B (Hiroki Aso)
Maintenance information: 2024.5.16 sound output confirmed (good sweep test)
Accessories: saran net
Main specifications: low frequency 18 cm cone woofer high range 3.5 cm dome tweeter impedance 6 ohm allowable input 70W W225 x H370 x D229 mm 5.4 kg/book
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
*The attenuator is cheap and is sold as is. This model was measured to improve the quality of the NS-500M. Carbon is used for the woofer. It has a transparent tone typical of Yamaha, has good response, and is made with digital sources in mind. Overall, there is a lot of feeling of use such as small scratches and dullness (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: saran net
Main specifications: 3-way speaker 40Hz-20000Hz 6Ω 100W W374 x H678 x D324.5mm 23.5 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg
The winding of the mainspring is smooth and can produce sound, but the platter swells, and there is no screw in the hinge and the lid comes off, so it is sold as it is. The volume is not big, but I feel good in the cohesion of the sound. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.8 operation confirmed
Accessories: handle
Main specifications: W400 × H335 × D470 11.95kg (actual measurement)
The price has been reduced. 2014/7/13 sales price 198,000 yen 2014/7/13 spring has been exchanged! Columbia Grahonora is a gramophone with an orthodox design that doesn't take up much space. It feels like it's in the narrow range and sounds almost only in the mid range, but it has a retro vibe that sounds like it's playing in the background of a black and white movie. The brakes are good, and pitch control is also very sensitive. There are age stains, scratches, and rust on the exterior as a whole. Spring type (Hei Kazuyuki)
Maintenance information: 2014.7.13 Maintained (spring repair operation confirmed)
Accessories: no accessories
Main specifications: W425 x H345 x D478 mm 17 kg
The disposal price has been reduced. Member discounts are not applicable. 2022/12/18 sales price 79,800 yen Columbia desktop gramophone Viva-tonal Grafonola. You can adjust the volume with the front fins. The sound box is equipped with No. 9. The exterior is in good condition, although there are some scratches and stains due to age, I think it is good considering the age (Kanai Hidetsugu)
Maintenance information: 2022.12.11 sound output confirmed
Accessories: none
Main specifications: Dimensions W490 (including handle) x H320 x D483 mm, weight 14 kg
The price has been drastically reduced. 2024/4/18 sales price 89,800 yen TANGO input transformer, line transformer using NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
It is one of Monster Cable's representative works that uses an unprocessed time correction structure at the 3.0 m and 1.9 m pair end of the speaker cable, and is quite thick with a conductor system of 3 mm. It is a cable with large changes in sound quality that can easily produce a sense of volume of bass (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Vacuum tube CD players are rarely in stock. It looks like a product manufactured in Germany and the Netherlands based on the MarantzCD-4000 package, and you can comfortably listen to the mild sound quality unique to tube balls and the gorgeous high frequencies that pop out. This is a great item for those who want an accent to the sound. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440 x H90 x D270 mm weight 3.82 kg
This is a replacement needle compatible with the Technics MM cartridge EPC-05STA. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics MM cartridges EPC-96SSAD. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics EPC-27 and EPC-09ST. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with the Technics MM cartridge EPC-42. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
This is a replacement needle compatible with Technics EPC-95 SSED. Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Sony VL-37G compatible replacement needle Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: original box, instruction manual
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
Replacement needle for M97xe. If you are an M97xe user of the main unit, how about using it as a spare? On the exterior, there is rust on the metal part of the magnet (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: none
Main specifications: needle tip shape 0.2 x 0.7 mil oval needle optimal needle pressure 1.25 g
The price has been reduced! 2020/11/9 sales price 70,000 yen maintenance completed. This is a 2-way network. Since bass can be pushed out well, and high frequency adjustment ranges can be obtained with 2 types of HF/MF attenuators, it is a model that is easy to match the desired sound quality. There are small scratches on the exterior due to the feeling of use. Serial 05234 07210 (Makoto Kono)
Maintenance information: 2020.11.9 maintained (common wiring reinforcement terminal solder removal, rust removal treatment, cleaning, ATT (x4) contact disassembly cleaning, contact grease application, frequency characteristic measurement check (~ approx. 42 kHz), continue using the original capacitor for good results, input/output waveform and balance confirmation sound check)
Accessories: none
Main specifications: W114 x H190 x D228 mm 1.8 kg Crossover frequency 1.2 kHz Impedance 8 ohms Level control is continuously variable up to -8 dB in the middle range is 2 kHz and the high range is continuously variable up to -6 dB at 10 kHz
Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.)
Accessories: instruction manual (copy)
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
Fully maintained! The main part of the SQ38F is an independent power amplifier, the famous MQ60. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. The exterior has dullness, small scratches, and paint peeling. Serial 473753 (Hiroki Aso)
Maintenance information: 2024.5.19 maintained (vacuum tube socket block capacitor electrolytic capacitor oil capacitor SP and RCA terminal semi-fixed VR fuse holder replacement load test (8Ω load 1kHz 30W/30W) input/output waveform confirmation sound output check performed impedance switching SW gain VOL disassembly contact refinement oxidation and sulfidation prevention grease coating input/output waveform confirmation load test (1 kHz) (Sine wave at 8Ω load: 30W+30W) sound output test)
Accessories: copy of instruction manual
Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
This speaker system was developed with the aim of being a monitor for enjoying music rather than checking sound like a studio monitor. A silk OMF diaphragm is used to reproduce an excellent sense of localization and depth of sound image. The size that is easy to handle and the depth of pocket compatible with various genres are also attractive. There are small scratches and dullness throughout the exterior (Oikawa Tetsuji)
Maintenance information: 2024.6.3 operation confirmed
Accessories: none
Main specifications: 3 way, 3 speakers, bass reflex system, impedance 4 ohms, sensitivity level: 86 dB/w/m, frequency range: 35 Hz to 50 kHz, crossover frequency: 350 Hz, 2.5 kHz; external dimensions: W270 x H456 x D369 mm; weight: 15.8 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
The disposal price has been reduced. Member prices are not applicable. 2023/10/23 sales price 29,800 yen ※Currently sold. Comes with a special case! Portable headphone amplifier with built-in D/A converter. DSD256 (11.2 MHz/1 bit) PCM supports native playback of up to 768 kHz/32 bit. Please enjoy the sound quality unique to a thick mojo in the mid to low range. There is dullness and a feeling of use (Sasaki Shota)
Maintenance information: 2023.10.23 Operation confirmed
Accessories: original box
Main specifications: output level 35 mw/600 ohm, 720mw/8 ohm, output impedance 0.075 Ω, dynamic range, 125 dB input system, 3 optical systems, 1 coaxial x 1, microUSB x 1, 2 output systems, headphone jack x 2, charging time, approx. 5 hours continuous operation time, approx. 8 hours W82 x H60 x D22 mm 180 g
The price has been reduced. 2024/6/4 sales price 698,000 yen Oba Shoji genuine 2nd generation mono amplifier equipped with an ultra-high speed switching power supply. The suppleness, delicacy, and strength are all first-class products. First of all, I was surprised by the smooth, cored sound. The driving power is also excellent, and it has the ability to easily drive high-class speakers. There are 2 noticeable paint peeling spots on the top plate and light scuffs and minor scratches in places (Sasaki Shota)
Maintenance information: 2024.6.4 operation confirmed
Accessories: instruction manual, power cable, connection cable
Main specifications: 200W+200W (8Ω) 350W+350W (4Ω) main body W445 × H97 × D335 mm 13.5 kg/unit power supply unit W445 × H97 × D319 mm 13.7 kg/unit
The disposal price was lowered. Member discounts are not applicable. 2021/11/27 Selling price 148,000 yen The product around 1920 features a telescopic tone arm, needle pressure, and volume adjustment possible. 2-spring, oval straight horn The volume is not large, but the tone is delicate and coherent. The rotation is relatively stable, but there is sound cracking, so it is currently sold. The appearance has dirt scratches of age. (Takimoto Yutaka)
Maintenance information: 2021.11.27 operation confirmed
Accessories: handle
Main specifications: W440 × H380 × D520mm 17.9kg (actual measurement)
The price has been drastically reduced. 2023/9/28 sales price 700 yen. *Unopened item I opened it for photography. XLR cable 1.5m1 interconnect cable with the notation OFC AUDIO. XLR12C (male) - XLR311C (female) RoHS compliant (Hiura Katsuji)
Maintenance information: 2023.9.28 continuity confirmed
Accessories: none
Hi-Fi is in stock for the first time! GLANTZ statically balanced tone arm. The main body is machined from hard stainless steel, and the structure is firmly supported by 4 large bearings, and it has high traceability performance with reduced resonance and blurring, and exudes a sharp sound. Since there is weight in the weight part, you can use heavy cartridges such as OrtoFon's SPU without lowering the weight too much. The exterior is generally good (Takahashi Nobuyuki)
Maintenance information: 2024.6.2 operation confirmed
Accessories: instruction manual, headshell, phono cable, cartridge installation screw wrench
Main specifications: Form Static balance system Total length 330 mm Effective length (arm fulcrum to needle tip) 305 mm Effective length (arm fulcrum to center of turntable) 290 mm Compatible cartridge 16 to 43 g weight 1.14 kg Overhang 15 mm Mounting base internal dimensions 16 mm Mounting hole 30 mm