This is a 150-4H instrument model. It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. In addition to discoloration of the exterior and corn paper, mold and dirt on the edges, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
*Ordering decorative plates and power cords is in progress. Accuphase is a popular premain. It is a model that has energy in the mid-range, and also has strength and stickiness. It's sharp, very easy to listen to, and it's nice that it doesn't lose its atmosphere even when the volume is low. Record playback is also possible by adding a phono equalizer option board. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 170W+170W pre/power separable W475 x H180 x D422 mm 23 kg
The disposal price has been reduced! (Member price not applicable) 2024/6/2 sales price 49,800 yen Hi-Res Audio & Hi-Res Audio Wireless Bluetooth 5.1 Compatible DAC Preamp. Equipped with various functions, it is compatible with a wide range of PC audio. Equipped with an AK4499ExDAC, the sound quality of the Bluetooth sound source has been greatly improved. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.2 operation confirmed
Accessories: remote control, instruction manual, power cord, original box
Main specifications: PCM 44.1kHz-768kHz/16-bit - 32bit, DSD (native) DSD64-DSD512, DSD (DOP) DSD64-DSD256, coaxial/opt-in: PCM 44.1kHz-192kH/16 bit 24-bit W347xD276xH10.2mm 1.56kg
A standard wire world model with a wide 1.5m pair range and a smooth RCA cable. It allows you to enjoy music in the glossy, colorful mid- to high-frequency range. The exterior is dull and slightly sticky (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The disposal price has been reduced. Member discounts are not applicable. 2023/5/30 sales price 12,000 yen. Simple conduction has been confirmed, but the details have not been checked. Sony electret condenser microphone Can be used with AA batteries (Murakoshi Yoichi)
Maintenance information: 2023.5.30 simple conduction confirmed
Accessories: instruction manual, case, windscreen x 2, holder clip
Main specifications: frequency characteristics 40 to 15,000 Hz omnidirectional 250 ohms maximum input sound pressure level 122 dB
※The head pad is loose, so it's cheap. The earpads are in good condition. The Edition series flagship model is now in stock for the first time at Hi-Fi. It has a good balance from high to low frequencies, and it seems that it can be used regardless of genre. The ear pads are also soft to the touch and can be worn without stress. A slightly soapy scent remains on the body. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: special case, mini jack conversion plug
Main specifications: sealed dynamic headphone impedance 30 ohms playback frequency band 8 to 35,000 Hz sound pressure level 96 dB
Speaker cable 2.0m pair end Y lug specification An old type of speaker cable using carefully selected vintage wires. Each has a different structure on the HOT and GND sides. Clear sound with good separation. The exterior has frayed cloth (Tamura Eiji)
Maintenance information: 2024.6.13 operation confirmed
Accessories: none
For the first time in about 8 years, Mysonic Labs ultra-low impedance mono MC cartridges have arrived! It is a cartridge designed to extract as much information as possible from mono LPs. Even though it's clear, you can feel the richness of the relaxed sound, and it makes me reaffirm the goodness of mono LPs. Serial A577 (Tamura Eiji)
Maintenance information: 2024.6.1 operation confirmed
Accessories: instruction manual, original box, needle cover, brush
Main specifications: Ultra low impedance MC cartridge frequency range 10 Hz to 50 kHz output voltage 0.4 mV impedance 1.2 Ω needle pressure 3 g
Replacement needle compatible with National EPS-19ST Operation has not been confirmed since there is no main unit (Hiura Katsuji)
Maintenance Information: Operation Unconfirmed
Accessories: original box
Luxman's current phono equalizer that uses a non-feedback CR amplifier circuit using an all-stage vacuum tube has arrived! Using vacuum tubes, 4 independent Super Permaloy MC boost transformers and 4 output transformers are mounted on the left, right, and low/high, respectively. It is a model that emphasizes sound quality, using a VU meter and OFC, which are fun to look at. It is one that can be controlled in a variety of ways. There are small wounds and dullness (Sasaki Shota)
Maintenance information: 2024.6.3 operation confirmed
Accessories: original box, manual, power cable
Main specifications: circuit method: SRPP, terminal cathode follower, non-feedback CR type equalizer (RIAA) vacuum tube: ECC83 x 4, ECC82 x 2, EZ81 x 1 input sensitivity (1 kHz, when gain is switched 36 dB): MM 4mV, MC high 0.44mV, MC low 0.18mV input impedance: mm30kΩ to 100kΩ (variable), MC high 40Ω, MC low 2.5Ω gain (1kHz, when gain is switched at 36 dB): mm36dB, MC High55dB, MC Low63dB S/N ratio mm76dB, MC High75dB, MC Low74dB W440 x H92 x D397mm weight 12.5 kg
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
Machined aluminum headshell made by ENTRE. It has a standard shape, and the sound stretches and tightens well (Tomoho Asae)
Maintenance information: 2024.6.1 continuity confirmed
Accessories: none
Main specifications: dead weight approx. 13g
The price has been drastically reduced. 2024/5/3 sales price 29,800 yen A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: Playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/4/28 sales price 99,800 yen D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
The winding of the mainspring is smooth and can produce sound, but there is rotation noise, unevenness, and sound shake, so it is sold as it is. The volume is not big, but I feel good in the middle and high range center. The appearance is rust of the age, there are dirt scratches Kusumi. (Takimoto Yutaka)
Maintenance information: 2021.12.1 operation confirmed
Accessories: handle
Main specifications: W358 × H260 × D295 6.85kg (actual measurement)
An XLR cable 0.6 m pair uses the world's most advanced virtual coaxial structure, and by using the same structure as a line cable as well as a microphone cable, it achieves low capacitance and broadband transmission (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
* There is no name plate, but I was able to confirm a slight embossing of the model number on the belt seal on the side. Output: 50W for transparent sale push pull output: 50W primary: 5kΩ secondary: 4/8/16/32Ω use: 6L6, 6CA7, 6GB8, etc. W100 x H115 x D90 mm approx. 3.5 kg/piece, no name plate, and is inexpensive because it has been repainted and written on the entire surface (Kojima Yosuke)
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 18,000 yen USB isolator Input to USB Type-B and output from USB Type-A. USB low-speed (1.5Mbps) and full-speed (12Mbps) dedicated hubs. Please refer to the manufacturer's website for details. https://octy.co.jp/products/usb20.html ※5V power supply is not included. Please prepare separately (Oikawa Tetsuji)
Maintenance information: 2023.12.10 storefront operation confirmed (5V test power supply is supplied, and sound output operation confirmed by connecting between PC and USB DAC)
Accessories: *USB microB 5V power supply is not included. Please use your own USB adapter or the like.
Main specifications: 110mm×64mm×30mm 230g
※It is currently sold because it is cheap. AM/FM tuner equipped with AM stereo. There is dirt and a feeling of use (Oikawa Tetsuji)
Maintenance information: 2024.4.3 operation confirmed
Accessories: none
Main specifications: W260 x H96 x D336 mm Weight 2.3 kg
S terminal cable 2.0m model number unknown, S terminal cable from Audio-Technica's FINE GOLD series. Uses OFC line. There are many dull stains on plugs and shields (Murakoshi Yoichi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: none
Maintained including pickup replacement (replacement)! A CD player that lets you listen to a glossy, supple sound typical of England. It is the first model in the FMJ series, which continues with the CD36, which aims for a modern approach while retaining the core part of traditional English traditions. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 maintenance (replacement of products that can be replaced with pickups, mechanical assy cleaning, grease up of various parts) 2024.5.5 operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Equipped with a “24 bit ring DAC” jointly developed with DCS, HDCD compatible digital output: coaxial/TOS analog output: RCA2 system W430 x H85 x D290 mm 6.5 kg
Maintained! An FM masterpiece arm made in Japan made with a high level of stainless steel and workmanship accuracy. The clear, thick tone that doesn't make you feel incidental sounds is excellent, and the breadth and ease of settings, and the excellent firm and excellent tracing ability in the dynamic balance type are excellent (Oikawa Tetsuji)
Maintenance information: 2024.6.5 Maintained (We will disassemble the arm needle pressure application mechanism part and clean it. The arm lifter skate rubber was replaced due to deterioration. Operation tests with cartridge mounting were also good)
Accessories: phono cable, instruction manual
Main specifications: total length 325 mm effective length 245 mm overhang 15 mm needle pressure application range 0 to 5 g arm height adjustment 25 to 60 mm compatible cartridge weight (including shell) 17 to 44 g mounting hole diameter 31 mm
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use such as exterior, fading, abrasions, etc. (Kanai Hidetsugu)
Maintenance information: 2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. The safety wire is broken. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, such as fading, abrasions, etc. (Kanai Hidetsugu)
Maintenance information:2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced! Member discounts do not apply. 2023/4/2 sales price 10,000 yen*Currently sold. The safety wire is broken. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. On the exterior, there is a feeling of use, such as cracks, fading, abrasions, etc. on the main body (Kanai Hidetsugu)
Maintenance information: 2023.4.2 sound output confirmed
Accessories: none
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/30 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
Disposal prices have been reduced. Member discounts do not apply. 2022/12/29 sales price 10,000 yen. In-ceiling subwoofer Equipped with a single 5.25-inch woofer, it provides deep bass up to 40Hz without distortion. There is a feeling of use on the exterior, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information:2022.12.28 operation confirmed
Accessories: instruction manual (copy)
Main specifications: 50 Hz to 230 kHz 96 dB 6 ohm φ391 mm depth 205 mm 6.4 kg
*Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: RCA cable
Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
*Currently sold. The output has been changed to an RCA female terminal. FR MC boost transformer using a toroidal core. Create a natural sound that makes it easy to understand the characteristics of cartridges. In addition to switching the impedance of 10 to 30 ohms, there is also a bypass position, so it is compatible with various cartridges without taking up much space. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.21 Operation confirmed
Accessories: copy of instruction manual, connection cable
Main specifications: impedance 10 ohm/30 ohm/PASS playback frequency band 20 Hz to 30 kHz W64 x H64 x D105 mm approx. 455 g
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
The disposal price has been reduced. Member prices are not applicable. 2023/9/13 sales price 2,980,000 yen Maintained with attention to details such as drivers and wiring! The Georgian 4 is attractive for its elaborate horn configuration and beautiful furniture-like design. It is a model with a built-in crispy horn, a structure that creates a unique sound with a rich sense of scale, and the loud sound is truly an American masterpiece, but you can also feel a somewhat English-like sex appeal. *The attenuator has been maintained, but slight chipping occurs when turning due to deterioration of the original winding resistance (Oikawa Tetsuji)
Maintenance information: 2023.9.13 Maintained (828HF disassembly and maintenance: separation from magnetic circuit and diaphragm, magnetic circuit diaphragm maintenance: cleaning of the magnetic circuit, rustproof vibration system, round out, stop noise, T350 disassembly and maintenance: separation from the magnetic circuit and diaphragm, sound pressure difference adjustment: stop noise due to resonance sound generation, elimination of sound pressure drop due to rear sound leakage. Confirm that there are no modifications inside the housing. Remove rust from screws on screw-type terminals, pickle, and polish and clean the receiving side. ATT (x4) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. (Input/output waveform and balance check, sound output check)
Accessories: none
Main specifications: 4-way 15WK, 828HF, T350, X336 (300/3500) approx. W860 x D660 x H1,350 mm approx. 90 kg
XLR decimal cable 1.5m Glen optimized 4N silver wire+polymer coating A rare digital cable. GOLD ECLIPSE has a reputation for its thickness, smooth texture, and good tone. The bright texture with high musicality is attractive enough. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.11 continuity confirmed
Accessories: No accessories
The price has been reduced. 2024/3/6 sales price 15,000 yen*Currently sold because it is cheap. Small mixer with built-in processor. It can also be used as a PA processor by installing it between the mixer and power amplifier (Oikawa Tetsuji)
Maintenance information: 2024.3.6 operation confirmed
Accessories: power adapter
Main specifications: W155 x H40 x D102 mm (excluding protrusions) 540 g
The price has been drastically reduced. 2024/6/8 sales price 198,000 yen A 3-way tall boy speaker system based on the Concerto Grand Piano. It has a glossy black body full of guests and leather that gives off a chic atmosphere, and a clean tall boy shape with a sense of luxury. The sweet, smooth tone goes great with chamber music and vocals. The exterior, the SP terminal metal part is dull, and small scratches are scattered on the spikes, and a feeling of use such as dullness and abrasions can be seen throughout (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: saran net, spikes, cloth cover
Main specifications: 3-way 3-speaker bass reflex system frequency characteristics 35Hz-20kHz impedance 4Ω output sound pressure level 90dB W237 x H1080 x D310 mm 25 kg
YAMAHA GT racks are highly rigid and have excellent earthquake resistance. The main body is made of 50mm thick particle board, which can firmly support even heavyweight amplifiers. The logo plate is curved, and there is a large repair mark one step below (Oikawa Tetsuji)
Accessories: none
Main specifications: body plate thickness 50 mm medium plate thickness approx. 30 mm W580 x H440 x D440 mm 31.5 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. A unique digital amplifier technology “VL Digital” has been introduced to reproduce high-resolution sound more vividly in a PC environment, making it easy to enjoy as a desktop speaker. The color on the top plate has faded and there are dents (Oikawa Tetsuji)
Maintenance information: 2024.5.29 Operation confirmed
Accessories: none
Main specifications: 40W+40W (4Ω) playback frequency range 50Hz to 100kHz digital IN sampling frequency 32, 44.1, 48, 96, 192 kHz/24 bit size Rch: W169 × H263 × D240 mm Lch: W169 × H263 × D215 mm Weight Rch: 6.4 kg Lch: 4.3 kg
The price has been reduced. 2024/5/25 sales price 39,800 yen This is an S-shaped tonearm. You can use static balance cartridges with a dead weight of 15 to 22 g. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.22 continuity confirmed
Accessories: instruction manual, connection cord
Main specifications: static balance one-point cross suspension type, effective length 229 mm, applicable cartridge weight 4 to 12 mm
The disposal price has been reduced! Member prices are not applicable. 2024/5/17 sales price 99,800 yen ※The HDD has been changed to an SSD (2TB). This is a black model that has upgraded the DELA N1A/N1Z, which was announced and sold as the industry's first “audio NAS,” and improved commerciality. Equipped with a dedicated USB-DAC connection terminal, the rear design has been renewed. In addition to being equipped with a 60W high-capacity power supply unit, a newly developed high-capacity capacitor bank is mounted on the rear stage of the power supply unit. A newly selected 3.5-inch quiet drive is mounted on a floating silicon bush to improve sound quality. There are scuff marks and dirt marks on the exterior. Serial 40300161000139 (Fujisawa Yukishi)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: power cord
Main specifications: storage capacity 2TB (2TB SSD x 1) input/output terminal USB 3.0 x 3 (import/capacity expansion/backup) USB 2.0 x 1 (for USB-DAC connection) RJ45 x 2 (router connection/network player) compatible file format WAV · AIFF · FLAC · ALAC · DSF · DFF sample frequency 44.1/88.2/176.4/352.8/48/96/192/384 kHz (PCM) 2.8 /5.6/11.3 MHz (DSD) compatible bits 16 to 32 bits (PCM) W436 x H70 x D352 mm weight 7 kg
The price has been reduced. 2024/4/15 sales price 35,000 yen It is a high-end masterpiece that has been loved by Sennheiser for a long time. As a studio monitor, it demonstrates its power without regret. It expresses delicate sound and clear space, and provides both vocals and performances with high resolution. There is a slight feeling of use on the earpads (Kanai Hidetsugu)
Maintenance information: 2024.4.15 sound output confirmed
Accessories: original box, instruction manual, cable
Main specifications: dynamic open air, 300 ohms, 103 dB, playback frequency band 10 to 39,500 Hz, cable length: 3.0 m, mass: approx. 260 g
By converting light into magnetism with the 1.5m signal path of a digital RCA cable, the fate of digital, common mode noise is shut out! There is dullness on the plug (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The HDMI cable is a 3.0 m high-grade connector, and a nylon mesh cable is used for the outer shell. It is possible to faithfully transmit high quality video and sound (Tamura Eiji)
Maintenance information: 2024.5.24 Operation confirmed
Accessories: none
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Otai audio brand high-capacity clean power supply. CSE special order The sense of localization becomes so clear that it makes you think that the sound changes just by inserting the power supply, and a sound field rich in spatial expression comes out. Another advantage is that the grunt is very small. There are small wounds and dents (Oikawa Tetsuji)
Maintenance information: 2024.6.11 operation confirmed
Accessories: power cable
Main specifications: clean power supply capacity 3000 VA 100/200 V with input changeover switch (inlet is 3 pins) output voltage 100V output 3 pins x 6 ports W300 x H194 x D357 mm 32 kg
TOPPING USB isolator This is a high speed audio isolator compatible with USB 2.0. Compatible with PCM32bit 768kHz DSD512 natively It removes ground loop noise. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.6 operation confirmed
Accessories: instruction manual, original box
*Currently sold. Lo-D's 3-way 3-speaker system. I have a good impression that the sound connection from the low range is good. As a domestic speaker of this era, it makes me listen to jazz in a sexy way. In addition to the exterior and paint peeling, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: saran net
Main specifications: 3 way 3 speakers sealed impedance 6 ohms output sound pressure level 92 dB W315 × H575 × D305 mm 13 kg
*Currently sold. Details of only one Sony 15 cm full range unit are unknown, but there is an I-502-437-11 description on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
*Currently sold. Details of Sony's 15 cm full range unit pair are unknown, but there is a description of i-502-437-11 on the back. I was able to sweep and make a sound. The exterior has dullness, stains, etc. (Tomoho Asaine)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: none
LGC conductors are used for only 1 3.0 m RCA cable. I want a little more loss of the high frequencies, but the sound is so intense that it comes forward (Mizusaki Ryo)
Maintenance information: 2023.11.24 Continuity confirmed
Accessories: none
The disposal price has been reduced. Member prices are not applicable. 2024/5/9 sales price 128,000 yen One side tweeter has been replaced! The successor model to the super popular “IKON Series.” It is equipped with a unit that uses wood fiber cone paper. The mid and low frequencies are rich, and the high frequencies sound smooth. You can feel the depth of the sound clearly (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: original box, jumper plate
Main specifications: 3 way 4 speakers, frequency characteristics, 39 Hz to 30 kHz, crossover 700 Hz, 2.6 kHz, 14 kHz, efficiency 89 dB impedance 6 ohms size W188 x D352 x H1028 mm weight 17.8 kg