Disposal prices have been reduced. Member discounts are not applicable. 2018/10/24 Sales price 3,000 yen These are parts made in Mexico whose details are unknown. There is rust, dirt, etc. (NAGAI Michio)
Maintenance Information: 2018.10.24 Conductivity Confirmed
Accessories: none
It hasn't been in stock in a long time! Accuphase Premium Cartridges Using a sapphire tube cantilever, the sound is straightforward with no specific sound, almost no distortion, and a perfect sense of range. Now it's a manufacturer that pushes ahead with the cutting edge of digital audio, but it's a cartridge where you can once again feel the high level of analog audio technology (Yamato Yuki)
Maintenance information: 2024.5.31 operation confirmed
Accessories: The original box needle cover is missing
Main specifications: MC type output voltage 0.18 mV needle pressure 1.5 to 2.5 g optimal 2 g impedance 4 ohms line contact needle
Digital breakout cable sold separately is included. High end AD/DA converter compatible with maximum sample rate PCM768 kHz and DSD 11.2 MHz. In addition to being an excellent USB-DAC, this extremely powerful high-output headphone amplifier that is compatible with balanced driving demonstrates more power than its size. It is also equipped with a high-resolution display, so you can enjoy music both audibly and visually. There is a slight thread on the exterior (Mizusaki Ryo)
Maintenance information: 2024.6.1 operation confirmed
Accessories: manual, original box, power adapter, conversion connector (digital breakout cable)
Main specifications: audio interface, maximum sampling frequency PCM768kHz, DSD 11.2 MHz, output impedance: 200 Ω balanced, 100 Ω unbalanced
The disposal price has been reduced (member prices are not applicable). 2024/5/14 sales price 158,000 yen The top plate has line damage, so it's cheap. Genuine Rin Japan. A famous player that brought network audio to the world at a high level. Equipped with the same functions as the KLIMAX DS, such as balanced output. The density of sound and the rich amount of information are attractive. The remote control is LINN's general-purpose type (Oikawa Tetsuji)
Maintenance information: 2024.5.14 operation confirmed (PCM/playback up to 192 kHz OK)
Accessories: power cable, universal remote control
Main specifications: support files FLAC, WAV, AIFF, AAC, MP3, WMA W381 x D360 x H80 mm 4.0 kg
This is an entry model that uses a 1.0 m pair of RCA cables with a symmetrical coax structure. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Disposal prices have been reduced! (Member discounts are not applicable) 2023/7/31 Sales price 15,000 yen*Currently sold. It is a 2.1 channel speaker system that perfectly matches Bose's unique compact, high-performance speaker technology with bass reproduction technology. You can easily enjoy simple 2.1 channels. As for the exterior, there are cracks in the woofer cabinet, overall dullness, and small scratches. Serial 990701 (Yonejima Satoshi)
Maintenance information: 2023.7.31 Operation confirmed
Accessories: no accessories
Main Specifications: Rated Input 100W Impedance 6Ω Satellite Speaker 6.0 cm Driver x 2, Antimagnetic Type, W78 x H157 x D104 mm, 1.1 kg, Subwoofer, 13 cm, 2 Drivers, W485 x H358 x D192 mm, 9.1 kg
The price has been drastically reduced. 2024/6/1 sales price 598,000 yen rare items have arrived! Swiss-made electro Voices It features a thick sound unique to wood horns, and tight low frequencies. The goodness of construction shines through. It is equipped with a laminated wood horn, and I want to raise the volume and make a sound. Please experience the natural tone of an acoustic guitar and the subdued sound of the wood bass. The exterior has scratches on the corner, paint chips on the back, and other overall line damage (Mizusaki Ryo)
Maintenance information: 2024.6.1 sound output confirmed
Accessories: none
Main specifications: Swiss 2 way 2 speakers, efficiency 93 dB, impedance 10 ohms, external dimensions W378 x H590 x D325 mm, weight: 28.5 kg
Luxman High Definition Speaker Selector It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. The speaker terminals are also compatible with banana and Y lug terminals. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.4 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
The flat characteristics make the sound good and are delicate. The sound quality is relatively thick among Audio-Technica models, and I like it without losing too much weight. The cantilever is slightly to the right. There is dirt and dullness (Hiura Katsuji)
Maintenance information: 2024.2.23 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 4 mV needle pressure 0.75 to 1.75 g oval needle self weight 9 g
This is an orthodox cable for 6.0m pair entry for speaker cables. The wire is soft and easy to handle. The exterior is dirty, dull, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
The disposal price has been reduced! (Member discounts are not applicable) 2023/10/12 sales price 500 yen D terminal cable 1.0m titanium-containing sheath suppresses vibration and achieves high image quality. The exterior has a light feeling of use (Tomonori Asae)
Maintenance information: 2023.10.12 continuity confirmed
Accessories: original box
Fine gold series with a 1.0m pair of RCA cables made of 99.997% OFC material. This is an entry-class, easy-to-use cable. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.29 continuity confirmed
Accessories: none
Digital cable 1.0m round optical mini plug (optical digital voice) → square optical plug (optical digital voice) You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: original box
Speaker cable with 1.7 m pair ends using unprocessed OFC. This cable is simple and easy to handle. There is a feeling of use throughout (Murakoshi Yoichi)
Maintenance Information: 2023.9.5 Conductivity Confirmed
Accessories: none
RCA cable uses 1.5 m pair of out-of-print conductors and single crystalline high-purity oxygen-free copper PCOCCC with theoretically zero crystal boundaries for all core wires, braided wires, and plug pins. The shield is rolled up on the plug attachment part, it is dull, and there is a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.5.3 continuity confirmed
Speaker cable This is an audio-technica home theater speaker cable with an unprocessed 3.0 m end. It's only for home theaters, so it's good to tune the sound field and sense of realism (Kobayashi Hitoshi)
Maintenance information: 2024.3.9 continuity confirmed
Accessories: none
Speaker cable is a basic type of high-purity OFC cable with unprocessed 1.3 m pair ends that are easy to use, and the conductor is a basic type of high-purity OFC cable made by stringing 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
※Only one speaker cable is a 3.0-meter untreated parallel type that is easy to use, and the conductor is a basic type of high-purity OFC cable made by twisting 196 0.1 mm diameter wires. The clear sound quality expands the range of uses. There is a feeling of use of kusumi etc. (Jun Tamai)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
Speaker cable 2.8 m pair ends are untreated, soft, and an introductory cable that is easy to run. The medium range is easy to hear and has a sense of volume, making it perfect for upgrading from accessories. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.9 continuity confirmed
Accessories: none
Speaker cable 3.3 m pair Speaker cable using Audio Technica's signature technology PCOCC conductor+ceramic insulator. The exterior is dull and dirty due to use over time (Asaine Tomoho)
Maintenance information: 2024.5.7 continuity confirmed
Accessories: none
S terminal cable 1.3 m wire/PCCC+Hi-OFC hybrid conductor titanium compound+rheostoma sheath There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.7 continuity confirmed
Accessories: none
The price has been drastically reduced. 2023/7/5 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. There is a feeling of use (Hiura Katsuji)
Maintenance information: 2023.7.5 sound output confirmed
Accessories: AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/2 sales price 2,000 yen. ※Hand over as is. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Tape is wrapped around the base of the AC adapter cord and a sticker is attached (Murakoshi Yoichi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, instruction manual, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The price has been drastically reduced. 2023/6/26 sales price 2,000 yen. *Currently sold. Audio-Technica optical digital distributor. Distributes 1 input system to 4 systems. Exterior, dullness, missing rubber feet, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.13 sound output confirmed
Accessories: original box, AC adapter
Main specifications: 1 OPTICAL input/4 output systems W70xD95xH32mm 154.5 g (actual measurement)
The optical digital cable uses a 0.7 m high-reliability metal ferrule plug and APF (all plastic fiber). How about an introduction to optical connections? The exterior is dull and has a feeling of use. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
※There is no compatible device and it has not been checked. Audio-Technica D terminal video cable 1.3 m. There is an appearance, rubbing, and feeling of use (Kobayashi Hitoshi)
Maintenance information: Confirmation unconfirmed
Accessories: none
A record player equipped with Bluetooth and USB that has sold a total of approximately 1 million units worldwide. You can listen to the sound of records with your wireless speakers or wireless headphones. Since you can move freely within the range of Bluetooth radio waves, you can easily enjoy the sound of records. Furthermore, it is equipped with a USB terminal that can convert record sound sources into digital data. The condition is generally in good condition. *The included shell cartridge is out of stock. Serial 234198228 (Yamato Yuki)
Maintenance information: 2024.4.8 operation confirmed
Accessories: copy of the instruction manual, EP adapter, USB cable, phono cable (general purpose)
Main specifications: Direct drive system 33-1/3, 45 or 78 rotations/minute communication system Bluetooth standard Ver.5.2 compliant USB function 16 bit, 44.1 kHz or 48 kHz USB 1.1 compliant Microsoft Windows 8.1 or higher, MAC OSX or higher W452 x H141.6 x D352 mm 8 kg
*Currently sold. microphone amplifier It is possible to pick up and amplify sound with an AV device without a microphone terminal. There are no noticeable scratches on the exterior (Sasaki Shota)
Maintenance Information: 2023.8.11 Operation confirmed
Accessories: original box, power adapter, manual
Main specifications: W70 x H30 x D92 mm 160 g
High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are an appeal unique to mono (Murakoshi Yoichi)
Maintenance information: 2024.6.2 sound output confirmed
Accessories: needle cover, original box
Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating on both the connector and plug (Murakoshi Yoichi)
Maintenance information: 2024.6.2 continuity confirmed
Accessories: none
※There is no problem with operation, but it is currently sold because it is cheap. Compact and lightweight phono equalizer. Please use it with a Miji component or a pre-main amplifier without a phono input. Perfect as an introductory machine (Daiki Goto)
Maintenance information: 2024.4.10 operation confirmed
Accessories: power cable, original box
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
*Currently sold. DENON's MC type cartridge boost transformer. Since it is equipped with a pass circuit, it is convenient when listening by exchanging 2 types of cartridges (MM type, MC type) with a single arm. Also, since it uses a transformer designed for the DL-103 and DL-103S, it fully demonstrates the capabilities of the models described above. You can see the exterior, dullness, rust, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 operation confirmed
Accessories: none
Main specifications: primary impedance 40 ohms secondary impedance 4 kΩ boost ratio 1:10 frequency band 20 to 40 kHz dimensions W51 x H53 x D181 mm weight 0.65 kg
A classic MC boost transformer. With 2 input systems, an impedance of 3.40 ohms switchable, and a PASS line, you can freely enjoy a variety of cartridges and tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.11.18 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input, 2 systems, switchable, 1st order impedance 40 Ω, 3 Ω, switching, 2nd order impedance 4 kΩ, boost ratio 1:10, frequency characteristics, 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
A classic MC boost transformer. With 2 input systems, the impedance can be switched to 3.40 ohms, and a PASS line is included, so you can freely enjoy various cartridges and tone arms. You can see the exterior, dullness, stains, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.2.13 Operation confirmed
Accessories: none
Main specifications: MC boost transformer input 2 systems switchable, primary impedance 40 ohm, 3 ohm switching, secondary impedance 4 kΩ boost ratio 1:10 frequency characteristics 10 Hz to 100 kHz, W97 x H65 x D155 mm, 800 g
2022.9.10 This is the first 607 model that has undergone full maintenance, such as replacing capacitors, transistors, and SP terminals! It's one that makes you feel the intricacies unique to the heyday of audio. You can feel the strength of extrusion in the low range when playing LP records and the dynamic sense of dynamism with an intonation in the middle range, which is unique to the golden age of SANSUI. The exterior has dullness and small scratches. Serial 227050109 (Yonejima Satoshi)
Maintenance information: 2022.9.10 Maintained (electrolytic/tantalum capacitors, transistors, SP terminal replacement, RCA terminal polishing. Board cleaning and re-soldering. SW/VR disassembly and cleaning, application of grease to prevent oxidation and sulfation, replacement of tantalum capacitors, electrolytic capacitors, transistors, and heat dissipation sheets in the EQ/TONE section. Semi-fixed resistor, cement resistor, fuse resistor, fuse, relay replacement. Input waveform confirmation, load test (1kHz sine wave, 8Ω load: 65W+65W OK) sound output test)
Accessories: copy of instruction manual
Main specifications: 65W+65W (8Ω) W430 × H168 × D389 mm 15.3 kg
Maintained! The thickness of the mid range and the thickness of the low range are an exciting masterpiece pre-main. The special phono part uses a transformer for built-in MC boosting. Compared to lower models, it combines the politeness of being able to enjoy classical music. Appearance, dullness, abrasions, and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (tone switch and other switches dismantled and polished, coated with grease (subsonic, loudness, muting, input selector, reckout), output relay, headphone relay replacement, main amplifier transistor, adjustment volume replacement, solder and board repair, balance volume replacement, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment, operation confirmation)
Accessories: copy of instruction manual
Main specifications: 130W+130W (8Ω) PHONO (MM/MC) 2 systems W460 x H160 x D444 mm 18 kg
Maintained! A popular model from late Sansui. While promoting wider range, the sound that feels the depth and energy unique to the company is compatible with modern speakers. The punching power in the mid to low range that drives a medium bookshelf speaker is truly a word. There is a feeling of use such as dullness and abrasions (Daiki Goto)
Maintenance information: 2024.5.9 maintained (maintenance contents/TONE, loudness, subsonic, processor, input selector, power amplifier direct, source direct, tape, reckout switch disassembly, polishing grease application, output relay replacement, power supply capacitor replacement, solder repair, each volume, switch cleaning, interior and exterior inspection and cleaning, operation confirmation.)
Accessories: copy of instruction manual
Main specifications: 90W+90W NEW HYPERα-X balance circuit PHONO (MM/MC) power amplifier with direct function W430 x H162 x D452 mm 18 kg
The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine)
Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes)
Accessories: copy of instruction manual
Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Maintained! A premain amplifier boasting high driving power, supported by a strong power supply unit typical of Sansui. The sound is soft and transparent, yet also has firm, thick bass. The sophisticated design is also attractive. There is rust on the exterior and back of the top plate, and a feeling of use such as dullness and abrasions can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 maintained (output relay, headphone relay replacement, recouped wire switch due to damage, input selector, etc., switch disassembly polishing grease application (tone, loudness, subsonic, processor, power amplifier direct, source direct, tape, reckout switch), solder repair, each volume, switch cleaning, interior and exterior inspection cleaning, adjustment inspection)
Accessories: none
Main specifications: 130W+130W (8Ω) rated power consumption 330W W471 x H162 x D452 mm weight 23.5 kg
Power cable 1.2m Power cable using the original precision conductor “102SSC”. A cable with a strong monitor color that clearly reproduces music. Recommended for connecting to professional audio devices. (FUJISAWA KOSHI)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Comes with original box First arrival at Hi-Fi Hall. Headphones with a focus on sound and design. You can enjoy it regardless of genre with clear lines of sound. It is characterized by being comfortable to wear without the impression that it is being compressed. It is in good condition (Sasaki Shota)
Maintenance information: 2024.6.2 operation confirmed
Accessories: manual, original box, connection cable
Main specifications: diamic sealed 40mm driver frequency characteristics 20 to 22 kHz impedance 30 ohms cord length 1.2 m 230 g
The price has been drastically reduced! 2024/4/27 sales price 79,800 yen Maintained! This is the first AUDIO OF OREGON control amplifier to arrive in a long time. It is compatible with 117V specification American speakers such as ALTEC and JBL, etc., and although it is a transistor, it doesn't become too stiff and makes you enjoy the firm sound. The exterior has dullness and scratches. ※The plug has been changed. Genuine RF Serial 02117 (Tamura Eiji)
Maintenance information: 2024.4.27 Maintained (no running symptoms. The board vibration check connection was checked. (All pattern parts of the flat amplifier module unit have been added and soldered.) 2024.4.13 Maintained (Electrolytic capacitor replacement in amplifier module. Pattern contact defect correction. (Voice operation check)
Accessories: No accessories
Main specifications: All stages use pure class A operation circuit input phono (mm/47 kΩ) tuner, tape, aux dimensions W483 x H89 x D190 mm weight 4.5 kg
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
The price has been reduced! 2024/2/8 sales price 1,000 yen Compatible replacement needle for AUREX MM cartridge C-550/2. The standard needle is a carbon fiber cantilever, which is presumably made of metal. Sound was made using C-550/2 (Takahashi Nobuyuki)
Maintenance information: 2024.2.8 operation confirmed (sound output on C-550/2)
Accessories: none
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
The price has been reduced. 2024/5/20 sales price 15,000 yen. Crossover 5000 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
The disposal price has been reduced. Member discounts are not applicable. 2023/8/26 sales price 5,000 yen. Mini jack to mini jack cable 2.0m This is a power control connection cable that can simultaneously control the power on and off of Macintosh components and the on/off of meter lights. The exterior is dull and has a feeling of use (Hiura Katsuji)
Maintenance information: 2023.8.25 continuity confirmed
Accessories: none
The price has been reduced! 2024/5/15 sales price 29,800 yen A low-cost clock generator that emits a high-performance master clock. It is recommended for those looking for expressive power with a precise amount of spatial information. By inputting a high-accuracy 10 MHz reference output obtained from a high-precision transmitter for measurement or military transmitters (using rubidium, cesium, GPS) not manufactured as an audio device to the external clock input terminal, it is possible to transmit an even more accurate master clock. The exterior is dull. (YONEJIMA Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: power cord
Main specifications: 2 clock outputs (BNC) 44.1 kHz/48 kHz magnification x 1/2/4 (maximum 44.1 to 192 kHz), 1 10MHz clock input system (BNC), size W190 x H56 x D220 mm 810 g
This model is limited to 200 units equipped with the highly acclaimed Philips 1-beam swingarm mechanism CDM9PRO. While inheriting the soft and thick sound of CD-23, the straightforward, flat, and well-balanced sound quality is attractive. As for the exterior, there is paint peeling around the legs. Serial MZ009644080005 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: Philips 1 beam swing arm mechanism with CDM9PRO, 1 input/output terminal/digital coaxial output system, 1 digital optical output system, 1 analog unbalanced output system, 1 digital coaxial input system, 1 digital optical input system, dimensions W250 x H124 x D281 mm, weight 6.3 kg