Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- Maintained! The culmination of Paragon, late model D44000WXA. The design created by Arnold Wolff is of course undisputed, but Paragon is wonderfully well thought out when it comes to sound quality, and it transcends the line for audiophiles. The combination of the reverberation of each unit and the late enclosure is the final form Paragon aims for. The beautiful way of making a plump, floating sound is unique (Yamato Yuki) Maintenance information: 2024.5.31 maintained (exterior cleaning/repair/gloss adjustment, horn paint black paint woofer back grill repair driver maintenance (magnetic circuit rust removal/gap cleaning/center adjustment, sound absorbing material replacement, terminal cleaning/screw replacement) tweeter maintenance (magnetic circuit rust removal/gap cleaning, terminal cleaning/screw replacement) ATT cleaning unit detachable) Accessories: none Main specifications: D44000WXA low range 38cm cone type LE15H+ medium range horn type 376+H5038p+ high range horn type tweeter 075 network LX5+N7000 crossover 500Hz/7000 Hz impedance 8Ω output sound pressure level 96dB allowable input 125W size W2640 x H902 x D740 mm weight approx. 300 kg
Manufacture:McIntosh
Price: JPY 116,364
- description
- Maintained! Hi-Fi is in stock for the first time! Macintosh transistor AM/FM tuner. The reception sensitivity is also good, and you can enjoy deep and warm sound even though it is a transistor. The exterior is scratched and dull. Serial JCR1658 (Jun Tamai) Maintenance information: 2024.5.31 maintained (varicon cleaning, F cover adjustment, OSC capacity adjustment, windshield peeling correction, each SW and VOL cleaning) Accessories: none Main specifications: W405 x H135 x D360 mm weight 8.1 kg
- description
- Designed with a complete dual mono configuration from the power transformer. The pre and power are also independently configured. The high range is sparkling, and the mid and low frequencies are thick, making it a profound sound. The exterior has dullness, threads, and scratches on the front (Ryo Mizusaki) Maintenance information: 2024.5.31 Maintained (The battery was replaced and the board pattern was corrected due to liquid leakage in the function memory battery. (Since the VR shaft is long, accuracy cannot be achieved, and stress is applied to the VR, so the extension shaft flexible joint Assy was replaced) Accessories: remote control, instruction manual, power cord Main specifications: effective output 85W+85W (8Ω) 170W+170W (4Ω) input: unbalanced (RCA) x 6 systems (1 system is PHONO: MM/MC compatible, 1 is TAPE) outer dimensions W440 mm x H95 mm x D400 mm weight 13 kg
- description
- Maintained! The balance between the good sound typical of the 70s Accuphase and the high frequency with good extension of the FET amplifier is wonderful, and it makes you enjoy the dense sound that is hard to feel with modern amplifiers. The champagne gold and VU meter designs are also a model that shines visually. The exterior has seal marks around the power switch and back speaker terminals. There is overall dullness and small scratches (Mizusaki Ryo) Maintenance information: 2024.5.31 Maintained (FET, output relay, electrolytic capacitor, film capacitor, semi-fixed VR, lamp. Each was replaced due to defects and deterioration. Switch disassembly, polishing and cleaning. Card edge contact cleaning and solder correction. (Bias and offset adjustment output sound check, interior and exterior have been cleaned) Accessories: copy of instruction manual, power cable Main specifications: rated output 130W+130W (8Ω) 180W+180W (4Ω) W445 × H160 × D70 mm 20 kg
- description
- The next generation model of the L-550AX has been reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring the glossy and dense sound unique to pure A class amplification systems. There are no noticeable scratches on the exterior. Serial G60800238 (Fujisawa Yukishi) Maintenance information: 2024.5.31 operation confirmed Accessories: remote control, instruction manual, power cord Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
- description
- This is the 3rd generation model of the 500 series with the familiar clean power supply. It secures and supplies clean power that is free from dirty electricity mixed into the home. Now in the 3rd generation, it is an excellent item where progress can be seen not only in the transparency of the mid to high range, but also in the sense of energy in the low range. As for the exterior, there are line marks on the back. Serial D2Y023 (Fujisawa Yukishi) Maintenance information: 2024.5.31 operation confirmed Accessories: instruction manual, power cord, original box Main specifications: rated output capacity 510VA, rated output voltage AC100V±1V output outlet, 3P x 8 meters/input/output voltages, strain rate, etc. Switch between 6 types and display W465 x H181 x D386 mm 23.8 kg
- description
- Denon's current CD player. Made in 2023 It is equipped with AL32 Processing Plus, which upsamples 44.1 kHz/16 bit data to 705.6 kHz/32 bit during CD playback and performs bit expansion processing. It comes with a front USB input that supports DSD high-resolution file playback. It is in good condition with no noticeable scratches. Serial DBTG082303357 (Fujisawa Yukishi) Maintenance information: 2024.5.31 operation confirmed Accessories: remote control, instruction manual, power cord, RCA cable, original box Main specifications: output RCA, digital coaxial, 1 optical system each W434 x H107 x D328 mm 4.9 kg
- description
- Maintained! Second generation model of the famous P-300 series. The sharp, sharp, and exhilarating sound is alive and well. It also goes well with JBL, etc., and makes a powerful sound. You can enjoy rough sounds that cannot be experienced with current products. There are scratches and scratches on the exterior. Serial B8Y695 (Fujisawa Yukishi) Maintenance information: 2024.5.31 Maintained (output relays, film capacitors, electrolytic capacitors, semi-fixed VR, etc. replaced. Fixed due to fixed switch. ATT disassembly and cleaning. SP switch polishing cleaning. Solder correction. Card edge contact cleaning. Increase and tighten the output terminals. ※Bias and offset check adjustment. Output audio check. (*When using MAIN & REMOTE1 speakers, be sure to connect both speakers.) Accessories: power cord Main specifications: 150W+150W (8Ω) W445×H160×D355mm 25kg
- description
- ※6 month warranty. It is a speaker that was made for natural sound and gained popularity. There is no sense of emphasis and there is a good balance of strength between the high and low frequencies, which have a high texture, and it makes me feel the high level of musicality. There are scratches on the exterior. Serial 16400837L, 16400837R (Fujisawa Yukishi) Maintenance information: 2024.5.31 operation confirmed Accessories: jumper cable Main specifications: 2-way, 2-speaker sealed, magnetic-proof type, W270 x H456 x D290 mm, 12.5 kg
- description
- Maintained! NAKAMICHIN's pre-main amplifier is in stock for the first time in a while. Simple design like an English amp. The thick, energetic sound typical of Nakamichi is attractive. The exterior has dents, dullness, and small scratches on the top plate. Serial 07436 (Yonejima Satoshi) Maintenance information: 2024.5.31 Maintained (power switch replaced. Output relay replacement. (Switch and volume contact correction) Accessories: No accessories Main specifications: 80W+80W (8Ω) equipped with Phonomm/MC W430 x H125 x D360 mm weight approx. 15.0 kg
Manufacture:ALTEC
Price: JPY 452,727(pair)
- description
- Refreshment maintenance was carried out with attention to detail, such as all exterior painting and driver gap cleaning! You can experience a unique sound that makes you feel a hot breath in the dry sound. This time it's a combination of enclosure 828B, woofer 416-8B, driver 802-8D+511B, and network N501-8A. The outstanding vocal band and the sense of energy of the resonating horn are amazing. The exterior has been beautifully finished due to exterior repairs (Murakoshi Yoichi) Maintenance information: 2024.5.29 maintenance (exterior repair/full painting, saran net replacement, horn painting and butyl tape removal work, new horn receiver creation. Woofer maintenance (viscoid adjustment, terminal/vis-cleaning) driver maintenance (magnetic circuit gap cleaning/center adjustment, diaphragm screw replacement/lead disconnection repair) network maintenance (frequency characteristic check, ATT cleaning, terminal/vis-cleaning, butyl tape removal work) unit detachment, new horn stay installation processing, new wiring) Accessories: none Main specifications: 2 way 2 speaker unit configuration 802-8D+511b・416-8b・N501-8A・828b Dimensions W760 × H1,375 × D610 mm Weight approx. 74.0 kg
- description
- Maintained! A preamp with plenty of phono that analog users are happy with. There are 3 PHONO inputs, 5 MM cartridge loads, and a dedicated transistor is used for the MC head amplifier, so you can enjoy clear, sharp sound with a clear outline (Yoichi Murakoshi) Maintenance information: 2024.5.29 maintenance (switch disassembly, contact polishing, contact cleaner application. Volume contact correction. Replace deteriorated parts in each circuit. PHONO circuit IC replacement display lamp replacement. (I/O pin jack polish) Accessories: none Main specifications: input terminal/3 phono systems (MM/MM/MC), TAPE2 system, AUX, TUNER power consumption 40W external dimensions W435 x H116 x D376 mm weight 8.5 kg
- description
- Maintained! A power amplifier with a separate name for the main part of the SQ38F series. The natural, smooth sound quality with a high sense of transparency is attractive. You can relax and enjoy classical music and vocals in a natural way. The deep sound quality that cannot be expressed with the latest vacuum tube amplifiers is exceptional. There is a slight feeling of use (Murakoshi Yoichi) Maintenance information: 2024.5.29 maintenance (vacuum tube sockets, block capacitors, electrolytic capacitors, oil capacitors, SP and RCA terminals, semi-fixed VR, fuse holder replacement. SW/VOL disassembly contacts are re-polished, and grease is applied to prevent oxidation and sulfidation. Input/output waveform confirmation, load test (8Ω load 1kHz 30W/30W), input/output waveform confirmation, sound output check performed.) Accessories: instruction manual (copy) Main specifications: output 30W+30W dimensions W410 x H160 x D205 mm weight 13.8 kg
- description
- Maintained by the manufacturer! Long-established Luxman compact vacuum tube type premain. The neat design and simple operability make you feel like it's a new era, but it has a sturdy finish that is warm and new, such as adopting a traditional OY type transformer. The sharp vacuum tube sound is attractive. There are line marks on the exterior and top surface, and dullness all over (Murakoshi Yoichi) Maintenance information: 2024.5.29 manufacturer maintenance (BASS, TREBLE volume replacement. Input selector switch contact cleaning, inspection of each part, general adjustment) Accessories: remote control, power cable, original box Main specifications: rated output 12W+12W (6Ω), 10W+10W (8Ω/4Ω) vacuum tube ECC83 x 1, ECC82 x 2, EL84 x 4, 3 input lines, Phono (MM compatible) 1 system frequency characteristics 20 Hz to 50 kHz W297 x H162 x D258 mm 11.5 kg
Manufacture:RS Laboratory
Price: JPY 116,364
- description
- A rare tone arm from RS Labs that was introduced and sold in a radio technical magazine in 1996. As with linear tracking, the tracking error is zero. The head shell part rotates freely, and the structure automatically adjusts so that tracking errors are always zero. The straight arm lowered from a high position to eliminate downforce is impressive. It is a legendary device that goes beyond the overview of traditional tone arms and reproduces analog (Murakoshi Yoichi) Maintenance information: 2024.5.31 continuity confirmed Accessories: original box, main weight, sub weight, hex wrench, instruction manual (English copy) Main specifications: One-point support arm effective length 215mm
- description
- The top model of the premain amplifier launched by AccuPhase to commemorate its 40th anniversary. Uses AAVA volume. The power amplifier section with pure Class A operation is designed to be resistant to changes in the surrounding environment. An overwhelming amount of information filled with a sense of silence and scale. It's the ultimate premain with a high degree of perfection. The exterior has a feeling of use such as dullness. Serial 16X713 (Jun Tamai) Maintenance information: 2024.5.30 sound output confirmed Accessories: remote control instruction manual power cord Main specifications: 30W+30W (8Ω), 60W+60W (4Ω) frequency characteristics 20Hz to 20kHz input terminals/balance (XLR) x 2 systems, unbalance (RCA) x 5 systems. Up to 2 option boards can be added to the rear panel W465 x H191 x D428 mm 24.7 kg
- description
- It is a Schumann resonance wave (7.83 Hz) generator that increases the S/N ratio by canceling electromagnetic waves etc. generated from the entire audio equipment. To use it, power the included AC adapter from an electrical outlet and place the main unit as high as possible in the room (1 m 50 cm or more). There is no noticeable damage to the exterior (Tomonori Asae) Main specifications: Schumann resonance wave (7.83 Hz) generator input voltage 12V W140 × D170 × H50 mm 220 g
- description
- A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying sound (Oikawa Tetsuji) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
- description
- A rare item. Technics meter unit. 3 modes can be switched. One meter can be used properly for 3 types, making it extremely easy to use. It's a rare gem just for visually enjoying the sound. There are scratches and rust (Oikawa Tetsuji) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: meter sensitivity 0 dBm 20 dBm switchable 3 system input switching W450 x H92 x D378 mm weight 5.3 kg
- description
- Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This one is not compatible with spikes. The exterior has dullness and scratches. Serial 30-07-00 (Tamura Eiji) Maintenance information: 2024.5.30 Operation confirmed Accessories: power cable, saran net, original box Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
- description
- Hi-Fi's first Trilogue series subwoofer has arrived! Not only for those using the Trilogue speaker, it also demonstrates sufficient performance as a standalone unit. This is a spike specification. There are wrinkles on the exterior like wrap marks. Serial 30-07-00 (Tamura Eiji) Maintenance information: 2024.5.30 Operation confirmed Accessories: power cable, saran net, original box Main specifications: built-in power amplifier, 2 speakers, bass reflex, built-in power amplifier output, 200W, high frequency cutoff frequency 40/50/60hz, W380 x H540 x D650 mm, weight 45 kg
Manufacture:Musical Fidelity
Price: JPY 116,364(pair)
- description
- Maintained! Hi-Fi is in stock for the first time! The rare MA100, which is probably thought to be a parallel model, is now in stock. Pure Class A mono power amplifier. It has a dense, thick tone with high output and excellent driving power. If you want to try mono, or if you are interested in pure A grade, don't miss it. There are small scratches on the exterior and a slight feeling of use. Serial 325/337 (Fujisawa Yukishi) Maintenance information: 2024.5.30 maintenance completed (POWER SW installation, C deterioration replacement in the board on one side. (Single-sided power transistor short → replacement with complete, C deterioration in the board, some solder defects → correction and operation check OK.) Accessories: No accessories Main specifications: 100W+100W (8Ω) power consumption 300W W440×H90×D250mm 6.3 kg
- description
- Maintained! This is a regular imported model from Yamagiwa. A control amplifier representing the golden age of McKinn. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays vintage speakers particularly well (Murakoshi Yoichi) Maintenance information: 2024.5.28 maintenance (each SW/VOL cleaning, pin jack cleaning, lamp replacement, operation check) Accessories: instruction manual (copy) Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
- description
- Maintained! For the first time in about 22 years, the musical Fidelity PREAMP3A has arrived. The circuit is based on a vacuum tube design, uses a low noise MOS-FET and uses a low NFB. The power supply unit has an external design, eliminates mutual interference with the audio circuit, and is particular about sound quality. The exterior is painted bald. Serial 03269 (Tamura Eiji) Maintenance information: 2024.5.30 Maintained (poor contact with each SW/VOL, poor RCA contact → cleaning (chips cannot be removed) C deterioration replacement in the board, internal shaft, etc., rust/sticking → cleaning. Operation check OK.) Accessories: none Main specifications: W408 x H60 x D249 mm weight 5.5 kg
- description
- *Currently sold. A small speaker with a 16.5 cm woofer. This is a high cost performance speaker that allows you to listen to rich musical sounds that are beyond its size. The full expressive power of the mid-range is attractive. The exterior is good with no conspicuous scratches. Serial 37866 (Yonejima Satoshi) Maintenance information: 2024.5.30 good sweep test Accessories: saran net Main specifications: 2 way impedance 8 ohms efficiency 90 dB playback frequency band 43 to 21,000 Hz W227 x H360 x D230 mm 7 kg
Manufacture:DAYTON AUDIO
Price: JPY 9,091
- description
- Dayton Audio's small power amplifier. Designed to be just the right size for a desktop, this is one that can be loud enough for a small speaker. It also has a headphone jack, so it can also be used as a headphone amplifier. The exterior is dull. Serial V200004300 (Tamura Eiji) Maintenance information: 2024.5.30 Operation confirmed Accessories: AC adapter Main specifications: 60W+60W (4Ω) W117 x H44 x D79 mm dead weight 1.23 kg
- description
- Sony's high-end floor-type speaker. Fine and high-response high frequencies, glossy mid-range, and low frequencies with thick and firm bass lines. There is a sophisticated sense of luxury, and the high-resolution sound source can express a sense of atmosphere and realism. There is a feeling of use on the exterior due to line damage etc. (Tamai Jun) Maintenance information: 2024.5.30 sound output confirmed Accessories: Saran net original box Main specifications: bass reflex 3-way 4-speaker system units used: woofer/200mm cone type x 2 midrange/130mm cone type x 1 tweeter/25mm soft dome type x 1 maximum input 200W 4Ω 88dB playback frequency band 28 to 60,000 Hz W320 x H1080 x D490 mm approx. 57 kg
- description
- Maintained. DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. You can see a feeling of use on the exterior, dullness, rust, scratches, etc. (Murakoshi Yoichi) Maintenance information: 2024.5.29 maintenance (board peeling and re-soldering treatment, block capacitor 30/20/20 μF replacement, film capacitor 0.047 μF → 0.1 μF original, electrolytic capacitor 50 μF, resistance 1W → 1/2 W original replacement, BIAS readjustment/RCA jack and vacuum tube socket caulking repair. Operation check) 2016.2.27 Maintained (AC cord, cord stopper, input terminal, capacitor (47uF100V) resistor (47k, 270k, 470k, 1M) 1/2 w, replacement of 2 vacuum tubes (6550), bias adjustment) Accessories: copy of instruction manual Main specifications: tubular mono power amplifier using vacuum tube KT88/5AR4/6AN8A output 60W/140W W229 × H190 × D229 mm 11.5 kg
- description
- Equipped with an original needle. A rare TYPE2 from the popular V15 series. Although it is MM, the resolution is high, and the power of the low frequencies and the ease of transmission are attractive. The exterior is dull and scratched. There is no such thing as needle bends (Murakoshi Yoichi) Maintenance information: 2024.5.26 sound output confirmed Accessories: none Main specifications: mm type output 3.5 mV needle pressure 0.75 to 1.5 g dead weight 7 g
- description
- Maintained! SPU round needle type with built-in transformer. This is a shell from the Knicks era. The rich, rich SPU-like sound is attractive. The built-in transformer gives the impression that transparency and clarity have been improved. Needle cover missing. The exterior has a feeling of use such as dullness. Serial 340898 (Murakoshi Yoichi) Maintenance information: 2024.5.29 Maintained (cantilever, damper adjustment, rubber cover replacement, cleaning) Accessories: none Main specifications: MC type with built-in transformer output 10 mV needle pressure 3 to 4.5 g dead weight 32 g
Manufacture:自作
Price: JPY 3,636 Sold Out
- description
- Self-made line selector with unknown details. It can be used with 2 input systems, 3 output systems, or 3 input systems, and 2 output systems. The exterior is well-built. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: W95 x H95 x D165 mm 778 g (actual measurement)
- description
- Technics MM Cartridges It was adopted as an accessory to the company's record player. It has a neutral, deafening sound, and is compatible with various music genres (Murakoshi Yoichi) Maintenance information: 2024.5.26 sound output confirmed Accessories: none Main specifications: mm type output voltage 3.2 mV frequency range 20 to 25 kHz needle pressure 1.75 g dead weight 6 g
- description
- ※1 bottle only. The RCA cable uses a 0.6 m 6N-7N hybrid conductor and twin core structure. The cable is thick and powerful in the mid-range, making it a great cable for vintage audio. There is slight dullness on the plug part (Murakoshi Yoichi) Maintenance information: 2023.7.20 Continuity confirmed Accessories: none
- description
- *The woofer edge is deformed, the center cap is dented, there is an ATT crack, and there are footprints on the top plate, etc., so it is inexpensive and is sold as is. A floor-type speaker with a porous metal cone that realizes all-metal in the entire band. From the unit to the enclosure, this is a masterpiece that incorporates technology and cost as if Otto's intention were shown. The rich, natural sound is attractive. The enclosure also has scratches, chipped corners, etc. (Oikawa Tetsuji) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: 3 way 3 speakers 8Ω 93dB W450 × H910 × D430 mm 51 kg
Manufacture:ONKYO
Price: JPY 8,909(pair)
- description
- ※There is no problem with operation, but since it is cheap, it will be handed over as is. A unique digital amplifier technology “VL Digital” has been introduced to reproduce high-resolution sound more vividly in a PC environment, making it easy to enjoy as a desktop speaker. The color on the top plate has faded and there are dents (Oikawa Tetsuji) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: 40W+40W (4Ω) playback frequency range 50Hz to 100kHz digital IN sampling frequency 32, 44.1, 48, 96, 192 kHz/24 bit size Rch: W169 × H263 × D240 mm Lch: W169 × H263 × D215 mm Weight Rch: 6.4 kg Lch: 4.3 kg
- description
- Denon's premium analog player. The shades and coatings of the cabinets are also impressive. The drive motor is powerful, and the stopping action is instantaneous in a blink of an eye until it rotates at a fixed speed. The sense of stability in operation is excellent, and record playback with high freshness is attractive. The exterior is scratched on the dust cover, small scratches, and dullness on the cabinet. Serial 3086300399 (Yonejima Satoshi) Maintenance information: 2024.5.29 Operation confirmed Accessories: power cable, connection cord Main specifications: quartz lock type direct drive 33/45 rotation static balance S-shaped pipe arm height adjustment range approx. 6 mm needle pressure adjustment range 0 to 4.0 g (1 scale 0.25 g) compatible cartridge weight 14.0 to 20.0 g (headshell included) W490 x H178 x D400 mm 13.6 kg
- description
- ※Since there are only 2 shelves, it is inexpensive. Comes with casters Hayami's vertical audio rack shelf can be changed to a 16mm pitch. The 4-way open structure also has excellent heat dissipation. Sound countermeasures are also good with heavy weight MDF+particle board. There are line marks on the exterior (Tamura Eiji) Accessories: none Main specifications: 4 shelves, load: top plate/bottom plate 150 kg, adjustable shelf 50 kg W604H992 x D580 mm (height 1060 mm including casters), weight 58 kg
- description
- Comes with a power unit (GKP04). NF type phono equalizer with built-in MC head amplifier. The sound quality is slightly softer with lower distortion than the CR type. You can enjoy analog playback of an introductory pre-main amplifier more deeply. *The manufacturer recommends an output of 0.3 mV or more for MC, and the mm gain is 45 dB. Serial No. 718 (Tamura Eiji) Maintenance information: 2024.5.29 Operation confirmed Accessories: none Main specifications: mm/MC switching input resistance mm/47 kΩ, MC/approx. 200 ohm W120 x H25 x D120 mm power supply unit W120 x H25 x D120 mm
- description
- High output MC cartridge for mono LPs only. Plays deep sound that was not produced with stereo cartridges. It has the vividness unique to Technica, but the three-dimensional effect and intensity are unique to mono (Tamura Eiji) Maintenance information: 2024.5.29 Operation confirmed Accessories: needle cover Main specifications: high output MC type output 1.2 mV needle pressure 2.0 g impedance 40 ohms dead weight 6.8 g
- description
- Hi-Fi pre-main amplifier for the network & streaming era. Network playback of high-resolution sound sources (up to DSD 5.6 MHz, PCM192 kHz/24 bit) and streaming services such as Amazon Music, AWA, and Spotify can be performed without using an external player, etc. The exterior is good with no conspicuous scratches. Serial BLP27191000468 (Yonejima Satoshi) Maintenance information: 2024.5.29 Operation confirmed Accessories: remote control, instruction manual, power cord, antenna Main specifications: rated output 60W+60W (8Ω) streaming (Amazon Music, AWA, Spotify, etc.), internet radio, high-resolution file playback compatible W440xH125xD379mm (when the antenna is laid down) W440 x H190 x D379 mm (when the antenna is erected) mass 10.8 kg
- description
- This is an attractive quad bookshelf type speaker with a beautiful finish and rich musical expressiveness. The calm stringed instruments and highly textured piano expressions are suitable for classical music. The exterior has a broken dowel in the upper left corner of the saran net on one side, and dullness and a feeling of use can be seen (Kobayashi Hitoshi) Maintenance information: 2024.5.28 Operation confirmed Accessories: saran net, jumper plate Main specifications: 86dB 6Ω 45Hz to 28,000 kHz W190 × H310 × D243 mm Weight 6.3 kg
- description
- The price has been reduced. 2024/5/29 sales price 108,000 yen This is an MC-only phono equalizer that was sold to commemorate the 25th anniversary of the birth of the LP12. It is designed so that the sound of the LP12 can be enjoyed at its best by simplifying the signal path and installing a low noise power supply. The center of gravity is low and the sound quality is high in texture, but surprisingly, it is compatible with the SPU and can be used for a wide range of purposes. There is an appearance, dullness, threads, and a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.29 Operation confirmed Accessories: power cable Main specifications: Phono equalizer for MC cartridges, input level 150 μ/480 μV, input cae impedance 1500/4.7 nF, W320 x H80 x D326 mm, 1.5 kg
- description
- A classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.26 continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 6.8 g
- description
- *Currently sold. The output has been changed to an RCA terminal. The entire frame has a wooden frame, back panel, and self-made cable processing, and the output has been changed to an RCA female terminal, making it detachable. Internal changes are unknown. We will sell it as is. In addition to the exterior, as described above, a feeling of use can be seen, such as dullness, scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.5.21 Operation confirmed Accessories: RCA cable Main specifications: W77 x H64 x D115 mm approx. 414 g (cable not included)
- description
- Manufacturer's maintenance completed! Denon's highest-model phono motor at the time. They are orthodox and have a high sense of stability, such as a turntable with a double structure and DENON's traditional AC servo motors. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.28 manufacturer maintenance (head gap adjustment, micro SW replacement, power circuit capacitor, strobe lighting circuit capacitor replacement, etc., inspection operation test of each part) Accessories: none Main specifications: quartz lock direct drive, outer rotor, 3-phase AC servo motor, double structure, die-cast aluminum turntable, compatible with 33 and 45 rotations, approx. 10 kg
- description
- Maintained! A model equipped with a variable switching phono, an RF official imported product. This is a high-end preamp that made the CELLO name known. It is no exaggeration to say that the elegant and beautiful tone, which is precise and delicate, has outstanding expressiveness and unique luster, is a work of art. A wood case is included, but the mounting screws are missing. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.5.29 maintenance completed (power supply unit and main body capacitor replacement, volume dismantling and cleaning, pin jack correction, specification inspection, various operation inspections) Accessories: power cord, connection cord, original box, wood case Main specifications: input imbalance (RCA) 8 systems/PHONO (MM/MC) 1 system/balance (Fisher) 1 system output unbalance (RCA) 2 system/balance (Fisher) 1 system body/W515 x H140 x D370 mm weight 10.1 kg power supply/W240 x H100 x D335 mm weight 5.1 kg
- description
- The price has been reduced! 2024/5/28 sales price 79,800 yen Maintained by the manufacturer in 2024/4! DENON's pre-main amplifier. It is a mid-size model, and a staple machine with excellent stability, with firm bass and delicate high frequencies. In addition to the bass energy from conventional models, you can enjoy well-balanced sound that takes into account the high mid to high frequencies with a high sense of transparency. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 8061507480 (Jun Tamai) Maintenance information: 2024.4.17 manufacturer maintained (Rch amplifier circuit, transistor and resistor replacement. Amplifier board soldering correction (both channels). (Idle current adjustment and operation inspection carried out.) Accessories: instruction manual, power cable, original box Main specifications: rated output 80W+80W (8Ω) PHONO1 system (MM/MC switching) dimensions W434 x H181 x D480 mm weight 24.0 kg
- description
- Maintained! A famous instrument and the first generation preamp. The coat is different from modern tones, and the solid sharpness and punchy tone go great with vintage speakers such as JBL. The crunchy sound image and exhilarating sounds are a habit. The exterior is dull and has a feeling of use. Serial E6T080 (Hiroki Aso) Maintenance information: 2024.5.27 Maintained (contact push switch due to poor contact with the rotary switch due to poor contact, all switches dismantling contacts polishing contacts grease coating TONE switch disassembly contacts cleaning contacts grease coating electrolytic capacitor replacement lamp replacement each input/output operation check) Accessories: instruction manual copy power cable (general-purpose product) Main specifications: 3 phono systems (with head amplifier), line 3 systems, tape, 3 systems, dimensions W445 x H160 x D373 mm, weight 13.4 kg
- description
- YBA's high-precision line preamps equipped with independent left and right volumes are in stock for the first time at Hi-Fi! In addition to the supple and glossy tone unique to YBA, you can also feel the high level of separation, it is authentic. A CP machine with a high level of satisfaction over the price. The exterior is dull and has small scratches on the top plate. Serial P21900L (Yonejima Satoshi) Maintenance information: 2024.5.28 Operation confirmed Accessories: instruction manual, power cord Main specifications: input: LINE/5 systems (RCA), output impedance: 20 ohms, output terminals: 2 systems (RCA) W430 x H83 x D330 mm, 5 kg
Used
Consigned
Hold
Reserved
Sold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
