The price has been drastically reduced! 2024/5/19 sales price 320,000 yen A next-generation model with the L-550AX reviewed and refined from basic performance. We have introduced the latest technology comparable to the higher-level model L-590AX2, such as the unique ODNF 4.0 amplification feedback circuit, the new LECUA 1000, and a buffer circuit with a discrete configuration. It is a practical modern machine with enhanced resolution while acquiring sound with a sense of luster and density unique to pure A class amplification systems. The exterior is good with no conspicuous scratches. Serial G60500154 (Yonejima Satoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: rated output 20W+20W (8Ω) 40W+40W (4Ω) W440 × H178 × D454 mm 24.3 kg
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
A masterpiece transistor type power amplifier from McKinn's heyday. The powerful, rich, and thick tone is a popular gem among jazz fans of yesteryear. The sound combined with speakers such as the 4343 is exceptional. The exterior is dull and scratched from use over time. Serial AX6653 (Tomonori Asaine)
Maintenance information: 2024.5.25 maintained (each SW VOL cleaning, lamp replacement, relay contact polishing power meter SW crack → internal reinforcement driver board capacitor replacement, power stage transistor check resistor replacement, additional meter board resistor installation capacitor replacement)
Accessories: copy of instruction manual
Main specifications: 200W+200W (1/2/4/8 ohms), equipped with an attenuator on the front, input sensitivity 0.75/2.5V, W411 x H181 x D368 mm, 38.6 kg
Both the interior and exterior have been fully restored and refreshed! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. It is beautiful due to exterior repairs (Sasaki Shota)
Maintenance information: 2024.5.10 Maintained (exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting. Saran net replacement/frame repair/reinforcement. Unit maintenance: low range/edge exchange, magnetic circuit gap cleaning/center adjustment, high pass/magnetic circuit rust removal/gap cleaning/center adjustment. Network maintenance: frequency characteristic check, ATT cleaning, faston terminal replacement, terminal cleaning)
Accessories: none
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
With AI2-B1 (balanced input board) +AO2-B1 (balanced output board). This is the 2nd generation digital voicing equalizer. Compared to the previous DG-28, it is overwhelmingly easy to use and convenience has been improved. Sound quality can be controlled surprisingly smoothly by operating the stylus attached to the main unit. You can save as many as 20 patterns of personal data. There is a feeling of use on the exterior, such as line scratches on the top plate, scratches on the upper corner, paint chips, etc. (Mizusaki Ryo)
Maintenance information: 2024.5.25 Operation confirmed
Accessories: instruction manual, remote control, power cord, connection cord, microphone
Main specifications: [Voicing] 1/6 octave 68 band IIR filter system adjustment range + · -12 dB [equalizer] 1/6 octave 74 band IIR filter+FIR filter/hybrid system adjustment range ± 12 dB [digital input/output] HS-Link/coaxial digital/optical digital 1 system each dimensions W465 x H151 x D396 mm weight 13.8 kg
The disposal price has been reduced (member prices are not applicable). 2024/2/16 sales price 378,000 yen ※The power supply part has been newly created. Other internally deteriorated parts have been restored! 2-way 100Hz specification An electric crossover coveted by Mark Levinson fans. You can see how well the early Levinson was built can be seen from the feel of the knobs that seem to make you addicted. You can listen closely to Levinson's unique sounds even on Divider. The exterior has scratches on the front top plate and other threads (Mizusaki Ryo)
Maintenance information: 2024.2.16 Maintained (*Since there is no power source, new power supply and connection cable were manufactured, noise appears in the LChLow output, transistor defects in the low pass module were replaced, re-encapsulated, readjusted due to left and right level differences, 4 volume contacts were cleaned, specs were inspected, and blocking characteristics were inspected. The crossover is 100Hz)
Accessories: Power supply unit (newly created, non-genuine), power cable, copy of instruction manual
Main specifications: 2 way (100 Hz specification) closed module type RCA Remo input/output size (main unit) W483 x H51 x D156 mm 2.8 kg size (power supply part) W101 x H101 x D256 mm 2.2 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
A current belt drive type player equipped with Luxman's original tonearm. Dust coverless specification. The high initial motion sensitivity unique to knife-edge bearings, stable trace performance, and excellent sound quality delivered from a machined aluminum heavyweight platter are attractive. Despite its compact size, you can enjoy authentic analog sound. The appearance is good with little feeling of use. Serial M21000149 (Tomoho Asaine)
Maintenance information: 2024.5.26 Operation confirmed
Accessories: instruction manual, power cord, original box, shell screwdriver, 2 hex wrenches, handles
Main specifications: belt drive system PID controlled brushless DC motor 33 1/3 rpm, 45 rpm, 78 rpm switchable static balance, S-shaped universal type knife edge structure compatible cartridge dead weight 4 to 10 g (17 to 23 g including attached headshell) anti-skating 0 to 4 g W465 x H133 x D393 mm weight 15.8 kg
Refresh yourself with internal and external maintenance! This is an attractive mid-size model with the large 38cm HPD385 unit pressed into a compact enclosure. It has good phase characteristics, and its highly textured, and moist tone makes classical music and vocals sound pleasant. The exterior has been beautifully finished due to maintenance. Serial 509925 509926 (Hiroki Aso)
Maintenance information: 2024.5.23 Maintained (exterior cleaning/repair/touch-up front baffle coating unit maintenance (edge damping agent coating high range side magnetic circuit rust removal/gap cleaning/center adjustment) ATT cleaning unit detached)
Accessories: saran net
Main specifications: coaxial 2-way speaker front bass reflex system 8Ω 91 dB W540 x H840 x D310 mm 32 kg