The disposal price has been reduced. Member discounts are not applicable. 2024/6/2 sales price 1,600,000 yen ※This is a 50 Hz specification. Maintained! A new Studio Technik Dusch suspension on a glass turntable! Fonoico is also a nice setting at 155th in the Franz era. The sharpness, precision of contouring, and a very thick sound are just words. A world-class player who still grabs the hearts of many analog fans and never lets go. Enjoy sounds that can only be experienced with EMT. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.6.2 Maintained (930ST: motor detached/lubricated, adjusted. Replace deteriorated forward phase capacitors with new ones. Speed adjustment brake felt replacement. Main bearing housing detachment, gasket replacement, bearing ball damage replacement, etc., sealant attachment assembly. Replace the motor bush with a new one that has deteriorated. Replace the deteriorated turntable anti-noise rubber belt with a new one. Replace the idler with a new one that has deteriorated. 155ST: Balance adjustment trimmer resistor defective replacement. NF gain adjustment trimmer resistor noise exchange. Foundation solder deterioration correction. audio measurements. SW/VR cleaning, coat processing. Left and right output adjustment. (Running test OK)
Accessories: power cord, manual (copy), oil, connection cable (1 pair each of XLR and RCA)
Main specifications: idler drive system aluminum die-cast turntable rotation speed 33 1/3, 45, 78 rpm W490 x H234 x D410 mm [tone arm EMT929] dynamic balance type needle pressure range 0 to 5 g [equalizer amplifier 155 st] frequency characteristics 40 Hz to 20,000 Hz input impedance 140 to 200 ohms output impedance 200 to 600 ohms [cartridge TSD-15 ] MC type output voltage 0.15 mV suitable needle pressure 2.5 g impedance 24 ohms
The price has been reduced. 2024/6/2 sales price 118,000 yen Maintenance completed! Torrens classic semi-auto player equipped with a floating and belt drive mechanism in a compact housing. The arm is the company's genuine TP-16mk4 specification. You can enjoy supple and delicate sound quality at a low price. It is recommended as an introduction and as an excellent secondary unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.28 maintenance (arm, elevation unit installation, end lift up mechanical system, electrical system adjustment. (Rotation, voice, arm movement check)
Accessories: instruction manual (copy)
Main specifications: TP16mk4: effective length 232 mm compatible needle pressure 0.5 to 3 g TD320: belt drive floating mechanism auto lift up W440 x H170 x D350 mm weight 11 kg
The price has been drastically reduced. 2024/6/6 sales price 148,000 yen Manufacturer maintained! Accuphase CD player. It is a CD player developed by introducing technology cultivated with separate systems, DP-80L/DC-81L. You can hear a sound with clear outlines and high transparency, just like the Accuphase from the 90s. There are many line marks, other small scratches, and a feeling of use on the top surface. Serial D0Y305 (Murakoshi Yoichi)
Maintenance information: 2024.6.4 manufacturer maintenance (tray opening/closing belt set and buffer spacer, operation switch, phase and capacitor replacement. Disassembly and cleaning of the loading mechanism. Operation, characteristic tests, aging tests, readjustment of parts, interior and exterior cleaning, insulation, and safety tests)
Accessories: remote control, instruction manual (copy)
Main specifications: 18-bit DAC, 2 analog outputs, 2 balanced outputs, 2 digital output systems, W475 x H115 x D325 mm, 14.5 kg
2018 fully restored item. This model omits the MC step-up transformer. The rear speaker terminal has also been changed to one compatible with banana plugs to match modern usability. Although it is a model from the 60s, there is no sense of a faded sound, and it feels like the flat, thick lackstone has been revived energetically. The sound without getting tired even after listening to it for a long time makes me fully experience the luster and warmth of stringed instruments. There are stains all over the exterior, and there are line scratches, fading, etc. on the cabinet (Sasaki Shota)
Maintenance information: 2018.8.25 Maintained (9P socket, SP terminal, RCA terminal, block capacitor, volume/BAL/TCVR, semi-fixed resistor, coupling capacitor, AC cord, resistor replacement. Power SW contact deterioration prevention relay added. SW/VR disassembly, cleaning, solder correction. (Internal and external cleaning, circuit readjustment, waveform check, input/output check, load test, sound output test)
Accessories: copy of instruction manual
Main specifications: output 10W+10W input terminal AUX1 · 2 Phono 1 · 2 (mm) W470 x H175 x D275 mm weight 14 kg
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Main specifications: diameter 35 mm x height 15 mm
J1 Project spike base set of 4 It is a hybrid type spike base that combines ICP composite, a resilient hard material, and stainless steel. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 35 mm x height 15 mm
Set of 4 Kyocera ceramic insulators The top is made of metal and the bottom is made of cork material. It is clear and you can expect the unique sound of ceramics. There are scratches and stains on the exterior due to use over time. (FUJISAWA KOSHI)
Accessories: none
Main specifications: diameter 30mm height approx. 15mm weight approx. 25g/piece
Set of 2 carries a stable potential and a clean signal by covering it with an item plug that plays a role in preventing noise from being mixed in or signal loss. (FUJISAWA KOSHI)
Accessories: instruction manual, original box
Main specifications: length 70mm inner diameter 43mm
※The height is 35 mm. The popular ICP composite spike has arrived. It is a composite material made of hard material and soft material. Combining a stainless steel chip with a modern body is effective in preventing vibrations. (FUJISAWA KOSHI)
Accessories: none
Main specifications: hybrid cone spike diameter 35mm x H35mm
PSE certified product. This product combines Eau Rouge's CFRP technology with a lightweight, highly textured acrylic box. Although it is the company's entry model, it is a product with a firm focus on sound quality. There are a few small scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: none
Main specifications: W300×H80×D65mm
Krypton high carbon steel insulator set of 4 It is a product that greatly improves acoustical and physical properties such as sound propagation speed with a special hard coating. The bottom surface uses silicone rubber material that dampens the natural vibrations of the metal and has an anti-slip effect with the floor, and has an adhesive effect on the floor. (FUJISAWA KOSHI)
Accessories: original box
Main specifications: flat type, diameter 40 x height 10 mm, 95 g per piece
Premium model with a 1.5 m pair balance cable, limited to 250 pairs worldwide. 19 stress-free 8nCu/0.26φwires are used as conductors. Thorough noise countermeasures have achieved high quality sound with extremely high SNs. On the exterior, there is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
※It is inexpensive because it is sticky. RCA cable, 1.0 m pair, 6N copper+silver hybrid conductor, Teflon insulator connector with correction chuck mechanism, is a high-performance model that adds a sense of dynamism of sound to the lower model's bass resolution and high transparency in the mid to high range. It rubs against the filter box, the paint is peeled off, and the sheath is sticky over time (Yonejima Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
4 pieces per pair Asada cherry cube base Improve sound quality by placing it under speakers, amplifiers, etc. ※The blister is out of stock. (FUJISAWA KOSHI)
Accessories: none
Main specifications: Asada cherry blossoms, load capacity 50 kg/4 pieces, W34 x H34 x D34 mm, measured 48 g/piece