Kappa series improved model Renaissance 90. The mid-high range is composed of EMIM and EMIT special units, and the sound is extremely delicate and clear. The deep sound field space and glossy, moisturized mid to high frequencies are unique to ribbon units. It has high resolution throughout the entire range and is suitable for classical and vocal styles. There are small scratches and line wounds, and there are repair marks of broken decorative plates at the foot (Oikawa Tetsuji)
Maintenance information: 2013.12.15 Maintained (exterior repair and cleaning. (Back side urethane deteriorated, replaced with substitute urethane)
Accessories: spikes
Main specifications: 4 way 4 speakers sealed floor type EMIT tweeter EMIM mid-range ribbon type 87dB 4Ω 250W W435 x H1245 x D315 mm 35.8 kg
A popular model that won the Good Design Award. Equipped with Onkyo's unique digital amplifier technology “VL Digital” circuit. The thin yet high power, and the smooth sound is attractive even though it is a digital amplifier. The slim housing allows you to enjoy it anywhere. Dullness over time, there are small scars (Sasaki Shota)
Maintenance information: 2024.5.20 Maintained (main volume contact correction. (I/O board signal line correction repair)
Accessories: remote control, manual, power cable
Main specifications: 100W+100W phono MM pre-out/power-in terminals W435 x H82 x D390 mm 11.3 kg
※The remote control is missing, and there is noticeable discoloration on the side, so it's cheap. Marantz's premain amplifier with an attractive, thin, and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers are also a good match, so you can choose any music genre. On the exterior, there are stains, line scratches, paint peeling on the sides, and white marks on the power cable (Oikawa Tetsuji)
Maintenance information: 2024.5.16 manufacturer maintained (SP relay replaced. Soldering correction. (Inspection of each part and implementation of operation tests)
Accessories: power cable, copy of instruction manual
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
Genuine Baes product. Comes with wood cabinet. A control amplifier representing Mackin's golden age. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, and it plays particularly well with vintage speakers. There are stains and small scratches on the exterior as a whole, and there are bubbles around the knobs of the glass panel and around the SW (Sasaki Shota)
Maintenance information: 2018.3.15 Maintenance completed (each SW/VOL cleaning, *BASS/TRE chips could not be removed. LDR, bridge diode, and illumination lamp replacement. C, R, etc. check, peeling correction only on the upper and lower parts. (*Some corrections are not possible)
Accessories: copy of the manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 2, AUX, TUNER, TAPE 1, 2 W406 × H138 × D330 mm 8.6 kg
Maintained in December 2020! DYNACO's tubular mono power amplifiers are highly popular. The sleek, straight, and energetic sound that comes out of the small body is attractive. Combinations with Altech and JBL are a staple, and they make jazz and rock sounds powerful and full of realism. There is discoloration and dullness on both channel bottom plates (Sasaki Shota)
Maintenance information: 2020.12.25 maintenance (6AN8 replacement on one side. Common block capacitor 30/20/20 μF replacement. Replace 1 x 2 film capacitors with 0.1 μF or other oil capacitors. Replace 3 x 2 Mylar capacitors with 390pF. 1 x 2 Vacuum Tube Socket and RCA Jack Caulking Repair (Other rated output: 36 to 55 W at AC 100 to 117 V, measured at SP: 8 Ω, operation check)
Accessories: none
Main specifications: tubular mono power amplifier using vacuum tube 6550/5AR4/6AN8A output 60W/140W W229 x H190 x D229 mm 11.5 kg/unit
*Currently sold. Comes with enhanced power supply OBH-2. Creek MM phono equalizer. Although it has a compact body, it lets you hear bouncy low frequencies with good pitch. The response of the power lamp is slightly poor, but this is the current situation (Oikawa Tetsuji)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: enhanced power supply OBH-2
Main specifications: Dimensions W100 x H62 x D125 mm Weight 360 g
Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Brand new and unused item (opened for photography) A slide base that allows you to use an orthophone's RMG/RMA etc. arm by using it in a hole for the SME 3009 or 3012. The shaft diameter is 20mm (Oikawa Tetsuji)
Accessories: screws, tools
Speaker cable 1.9 m pair end unprocessed double 4-core spiral hyperlitz speaker cable conductor is a blend of PSC plus & LGC. It is an excellent model that combines realism with thickness not found in recent audio quests (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Speaker cable is a basic cable composed of 4 single-wire conductors with 2.6 m pairs of untreated ends. It has a straight, extruded, and pleasant sound. There is dirt on the sheath on the exterior (Ryo Mizusaki)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
※Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product that can transmit pure signals. The balance is an indescribable cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
1.3 m power cable with clear and wide range sound at an affordable price. If you want to replace the power cable, how about starting with this model? (SASAKI Shota)
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
The 1.0 m XLR terminal of the digital cable uses 7N copper for both 110Ω AES/EBU core wire and shielded braided wire. Connectors are manufactured by Neutrik (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, LC-OFC class 1 conductor, is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is a flat, tight bass, and an indescribable cable with a smooth high-frequency luster. There is friction on the sheath, dirt, and deterioration on the plug (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
RCA cable, 1.0 m pair, LC-OFC class 1 conductor, is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is a flat, tight bass, and an indescribable cable with a smooth high-frequency luster. There is friction on the sheath, dirt, and deterioration on the plug (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
※Since only 1 bottle is on the R side, it is inexpensive. The 1.0m RCA cable has a calming sound and a unique thick air feel. WBT plug with WBT-0144 As for the exterior, the LR coloring on the plug has deteriorated and there are cracks (Mizusaki Ryo)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Phono cable, 1.25m, RCA-RCA type, record a wild and powerful sound! The sense of scale is conveyed in classical music, and the heat of the sound field is conveyed in jazz. The exterior is dull on the plug,
There is dirt on the sheath (Kojima Yosuke)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Woofer edge softening treatment! A mid-size dia-tone speaker. The sound image expressed from precise sound construction is carefully created with diamond tones, making classical music elegant and magnificent. Female vocals etc. are also recommended. There are small scratches, scuffs, and broken corners on the net. Serial 19119, 19433 (Fujisawa Yukishi)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: saran net
Main specifications: 3 way, 3 speakers, sealed frequency band, 35 Hz to 40 kHz, 6 ohms, sound pressure level, 90 dB, W360 x H808 x D325 mm, 29 kg/book
It is a 75 ohm coaxial cable with 0.7 m RCA terminals and a double shielded “cordel structure” that minimizes dielectric loss. The exterior is dull, part 1 characters are missing, etc. (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
Digital cable 1.0 m RCA plug This 75 ohm digital cable is ideal for generating clocks such as clock generators, word clock connections for receiving devices, S/PDIF connections to DACs, audio interfaces, DJ devices, etc., and video equipment. The exterior is dull (Fujisawa Yukishi)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original bag
A fully balanced discrete, non-feedback D/A converter using an independent mono mode that is also equipped with a NOS mode. Equipped with 2 ESS ES9038PRO In addition to being compatible with the latest high-resolution sound sources in various PCM and DSD formats via USB input, it also supports coaxial digital input (2 systems) AES/EBU input. You can enjoy more realistic and natural sounds in NOS mode. There are several dot-shaped dents on the front panel. Serial 190730008 (Fujisawa Yukishi)
Maintenance information: 2024.5.20 Operation confirmed (the mounting solder was fixed because the RCA terminal ground cap came off.)
Accessories: instruction manual, power cord, spike
Main specifications: input format (USB) PCM, DSD (DoP v1.1, ASIO) input format (coaxial/AES/EBU) PCM, DSD (DoP v1.1) compatible sampling frequency (USB) maximum 768 kHz (PCM) /maximum 22.6 MHz (DSD) compatible sampling frequency (coaxial/AES/EBU) maximum 192 kHz (PCM) /2.8 MHz (DSD64 DoP v1.1) PCM quantization Number of bits (USB) 24 bit 32 bit PCM number of quantized bits (coaxial/AES/EBU) 16 bit 24 bit USB profile USB 2.0, USB Audio 2.0 digital input USB (Type B) 2 coaxial (SPDIF) AES/EBU analog output XLR1 system RCA1 system analog output level (XLR) 5.6 Vrms analog output level (RCA) 2.8 Vrms frequency characteristics 2 Hz to 120 kHz (+0/-1 dB) S/N ratio 110 dB total harmonic distortion ratio 0.003% analog filter secondary passive power supply voltage AC 100V 50/60 Hz power consumption 40W size W430 x H109 x D379 mm weight 10 kg
The Philips CD-16 swing-arm CD-16 player with CDM4 is now in stock. The Marantz sound has an attractive transparent, supple sound. You can comfortably enjoy classical music, vocals, etc. just like analog music. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: remote control, instruction manual, transport lock pin
Main specifications: analog output, RCA1 system, digital output, 2 coaxial systems, W458 x H110 x D369 mm, 11 kg
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Crossover 5000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Uses a 0.5 m pair PCOCC RCA cable. You can see a feeling of use on the exterior, dullness, dirt, threads, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
This is an orthodox cable for 6.0m pair entry for speaker cables. The wire is soft and easy to handle. The exterior is dirty, dull, etc. (Takasaki Atsushi)
Maintenance information: 2024.5.19 continuity confirmed
Accessories: none
Non-switching Class A configuration mono power amplifier. It goes great with British speakers, and the fresh, rich, and powerful sound is appealing. It also has a built-in music sensing function that automatically goes into standby state (green) when the input signal is interrupted for a certain period of time, and turns on the power (red) when the signal comes back in. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cord, original box
Main specifications: 100W+100W 8Ω W160×H100×D350mm 5.0 kg
Phono cable is a 1.2m RCA-RCA terminal line cable with a phono ground pin. There is a feeling of use on the exterior, threads on the shield, dullness of the plug, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Continuity confirmed
Accessories: none
500Hz/2 way board included. Accuphase 2-way/3-way channel divider. You can change the crossover by replacing the board. It is one of the few channel dividers where you can enjoy multiple systems while retaining an analog feel. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: power cable, CB500, CB-2WAY
Main specifications: 2 way/3 way divider frequency fixed type W445 x H109 x D373 mm 9.1 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. An easy-to-use tuner equipped with 20-station random memory and an auto tuning function. The sound is clear and easy to hear. *TV broadcasting is compatible, but TV reception is not possible because it is a model prior to digital terrestrial broadcasting. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: instruction manual
Main specifications: W440×H78×D331 mm 4.1 kg
*Currently sold. There is poor contact with the balance, and there is a sound leak in the shaken part, which is the current situation. First generation of the best-selling 390 series. The compact body is equipped with a large toroidal transformer, and the sound quality is well-balanced and has a firm core at an affordable price. Recommended for those starting out with audio or those looking for a sub unit. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 operation confirmation (input/output possible, BAL contact is faulty)
Accessories: instruction manual
Main specifications: 60W+60W speaker output 2 systems line input 5 systems with PHONO (MM/MC) W434 x H120 x D279 mm 5.8 kg
A FOSTEX HA21 throat adapter is set on a self-made horn that is a size imitation of the FOSTEX H320. If you've been looking for this size, take this opportunity! You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: throat diameter 100 mm pitch 4 holes 60 mm 3 holes 50 mm overall W635 x H110 x D 455 mm kg (actual measurement)
※The center cap has many wrinkles, so it is inexpensive. Woofer edge softening treatment! Comes with a dedicated stand DK-10000 sold separately. Diamond Tone 40th anniversary model DS-10000 klavier. A limited-edition model of 300 sets created by infusing all the sensibility of the company's engineers into a beautiful piano finish reminiscent of crafts. It is a masterpiece that pursues even the smallest sounds one by one. In addition to dullness and scratches on the exterior, there is a feeling of use such as dents on the scoker cover. Serial 13467 13468 (Hiroki Aso)
Maintenance Information: 2024.5.20 Maintained (woofer edge softening treatment)
Accessories: dedicated stand (DK-10000)
Main specifications: 3-way 3-speaker sealed bookshelf type usage unit/27cm aramid honeycomb curved cone type, 5.0 cm boron D.u.d. dome type, 2.3 cm boron D.U.d. dome type, 6Ω 35 Hz to 60000 Hz crossover 600 Hz/5000 Hz dimensions W360 x H625 x D290 mm weight 27 kg
Maintained by the manufacturer! A special edition model of VRDS-10. This is the only TEAC player model that uses a Philips TDA1547 as a D/A converter. The sound quality is not sharp due to the hardware of VRDS, and the sound quality is well-balanced, which brings out the characteristics of the relaxed DAC7. The exterior has small scratches and a feeling of use such as dullness. ※There is a noticeable scratch on the front panel. Serial 30300 (Yamato Yuki)
Maintenance information: 2024.4.26 Maintained (inspection of each part carried out, tray belt clamp, belt turntable bearing wear, replacement pickup, and mechanical part cleaned and lubricated.
(Check operation)
Accessories: instruction manual copy remote control (for VRDS-15)
Main specifications: 2-channel CD player frequency characteristics 1 Hz to 20 kHz 8 times oversampling 20 bit digital filter W442 x H149 x D331 mm 11 kg
A power amplifier with a dual monaural configuration. This model has a small output yet has driving power, and since the signal path has been shortened, it makes you feel more powerful than the specs. You can fully enjoy the sound, intensity, and thickness unique to Levinson at an affordable price. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1520 (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: instruction manual copy power cable (general-purpose product)
Main specifications: 50W+50W (8Ω) 100W+100W (4Ω) 200W (8Ω MONO) input sensitivity/impedance 1V/50kΩ (balanced/unbalanced) W483 × H175 × D370 mm 19 kg
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
An ultra-high purity 6nCu with a digital RCA cable 1.0m pure silver coating is used as a single wire. Double shield structure with soft copper wire braids layered on top of aluminum PET tape. A two-layer sheath structure that controls unnecessary vibrations by covering the outer circumference of the shield with a RoHS-compatible PVC sheath. The exterior is generally beautiful with no conspicuous scratches (Tamai Jun)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
Balance cable, 1.0 m pair, solid PSC+ copper conductor, cable with a large sound field and excellent sense of sound separation. It is an extremely cost-effective model among the company's line cables. There is an abrasion on the plug (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
This is an entry model that uses a 1.0 m pair of RCA cables with a symmetrical coax structure. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
Self-made 4ch power amplifier using 4 Flying Mall digital power amplifiers DAD-M1. The construction is solid, and the sound is high resolution, just like a flying mall. Recommended for those who want to save space and use it for multiple purposes. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.5.20 sound output confirmed
Accessories: power cable
Main specifications: DAD-M1 rated output 160W/4Ω 100W/8Ω frequency characteristics DC to 25kHz/4Ω DC to 50kHz/8Ω S/N ratio 120dB overall size W270 × H162 × D290 mm weight 6 kg (actual measurement)
Set of large JBL horns 2360H and 2360T. It's perfect for those who want to experience the intense and open sound of a horn. A self-made mounting stand is also included, so you can quickly attach it to the enclosure. In addition to dullness and small scratches on the exterior, there is a feeling of use such as peeling paint (Hiroki Aso)
Accessories: self-made stand
Main specifications: 2360H 2 inch driver radial horn recommended crossover 500 Hz overall size W792 x H786 x D894 mm weight 18.2 kg (actual measurement)
※One screw lid on the top plate is missing. ADK 3-tier rack It is a system upgrade type natural wood audio rack that allows units to be stacked one after another as the number of devices increases. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W574 x H635 x D500 mm first stage space H250 mm second stage space H230 mm weight 26.7 kg
RCA cable 2.0m pair LC-OFC Class 1 is a long-selling product capable of pure signal transmission that has been produced for over 10 years. The balance is impressive with flat, tight bass and smooth high-frequency luster. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: none
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box
Comes with original box! The 1.0 m digital coaxial cable has a 2.5% silver coating and is a mid-range model that balances every element at a high level. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 continuity confirmed
Accessories: original box