Stress-free processing that maintains the atomic arrangement in a healthy state at all times due to the unique self-annealing of the 1.0 m pair of RCA cables. It is a cable that enables strict and extremely accurate digital transmission. On the exterior, there is a small scratch on the terminal (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
The 2.0m RCA terminal stress-free 6ncU digital cable is bright and has an attractive character. The exterior is dull (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
The 1.0m pair of RCA cables are thick, but they are easy to bend and easy to use. A beautiful sound spreads out, and S/N is further increased by connecting to the ground due to the type environment where the thickness increases (Tamura Eiji)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: none
Digital cable 1.0m RCA terminal Teflon/air insulator A golden cross digital cable that strongly reflects the sound of Caldas. The sound is thick and rich, and removes the thinness of the digital system. On the exterior, oxidation and darkening can be seen on the terminals (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: instruction manual
RCA cable 2.0m pair, solid high resolution even though it is MIT entry class. The cable has just the right amount of sound pressure and is easy to use (Tamura Eiji)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
An entry model for the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which is clear, has a clear sound field, and also has resolution power. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model in the Miterminator series with a 1.5m pair of RCA cables. A high CP model unique to the heyday of cables, which combines resolution with a natural, good tone. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: none
Mid-range model of the 1.0 m NBS digital XLR cable in the SIGNATURE series. This high CP model is popular among JAZZ and ROCK fans, which is characterized by the thickness of the sound image unique to NBS and the high sense of energy. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
RCA line cable 1.0 m pair model using plasma (powder of metallic compound) shield. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 100006162 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Mid-range model of the 1.0 m pad digital RCA cable. A high CP model with excellent smooth, textured mid-high range and three-dimensional spatial expression. The exterior has dullness on the terminals (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.0m digital RCA cable with no liquid leakage, plasma shielding. The American Standard Series Cable VENUSTAS is middle class. Plasma shielding is only effective when digital. The high level of SN shines through. The exterior has dullness on the terminals. Serial 1000061118 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
By converting light into magnetism with the 1.5m signal path of a digital RCA cable, the fate of digital, common mode noise is shut out! There is dullness on the plug (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Optical digital cable 1.0 m. 41 pure quartz cables are bundled and stored in a metal flexible pipe. A stable optical cable that eliminates return light reflection, which is the cause of sound quality deterioration. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Optical digital cable 1.5m high sampling compatible model It is an optical cable that uses a special plastic material with high speed and high capacity, and is high quality for an optical transmission system SSI type, and is compatible with high sampling high speed links. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
*This model uses 1.0 m pair plasma (powder of metallic compounds) shielded by the No. 3 HOT XLR cable. The synergetic effect of cryogenics and magnetostriction achieves an overwhelmingly high signal-to-noise ratio. The exterior is dull. Serial 10005476 (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Power cable 1.5m PSE standard product Uses “SUPRA LoRad,” a world-patented audio power cable developed by JENVING in Sweden. Neutral, unobtrusive sound quality. Compatible with a wide range of music genres. On the exterior, there is dullness on the connector (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box
Digital XLR cable equipped with a 1.2m hyperdigital isolator. The separation is good, and the sound quality is clean and sharp, typical of Saek. The exterior has dullness and disappearing characters (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: original box,
A standard wire world model with a wide 1.5m pair range and a smooth RCA cable. It allows you to enjoy music in the glossy, colorful mid- to high-frequency range. The exterior is dull and slightly sticky (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
A wireworld RCA cable that uses OFC copper as the 1.0 m pair conductor of the RCA cable, perfect for a basic model. It is a cable with the feel of a wire world, with thickness in the mid range and glamor in the high range. As for the exterior, there is a screw on the plug (Satoshi Yonejima)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
1.5 m pair of balanced cables ULTRA series OFHC, a unique cable with a natural, smooth tone and a high sense of sound pressure. The exterior is dull (Yonejima Satoshi)
Maintenance information: 2024.6.12 continuity confirmed
Accessories: No accessories
Set of 4 insulators It is effective for player and rack feet. There are scratches and bumps on the exterior (Tamura Eiji)
Accessories: none
Main specifications: height 19 mm x diameter 95 mm weight 109 g
digital line transformer It has a 1:1.3 times boosting effect, and gives an analog-like thickness, good texture, and a sense of depth. It is recommended for those who want to make the CD sound more analog-like. Please use it by sandwiching it between the amplifier and CD player.
Maintenance information: 2024.6.12 sound output confirmed
Accessories: none
Main specifications: W124 x H80 x D170 mm 1.3 kg
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Short plug for balanced input terminals. It can be inserted into an empty input terminal such as an amplifier or D/A converter to achieve a noise reduction effect. An item that also reinforces the back plate of the equipment, enhances damping against external vibrations, and greatly improves sound quality. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
1650 series SACD/CD player. It is a model with a low, loud sound that makes you feel a sense of depth and scale. There is also a digital input terminal, and it can also be used as a standalone D/A converter compatible with sampling frequencies of 32 to 192 kHz. In addition to stains on the exterior and front panel, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cord
Main specifications: Super Audio CD section/1 bit DSD system Playback frequency approx. 2 Hz to 50 kHz SNR 119 dB CD section/playback frequency approx. 2 Hz to 20 kHz W434 x H137 x D336 mm 13.5 kg
*Ordering decorative plates and power cords is in progress. Accuphase is a popular premain. It is a model that has energy in the mid-range, and also has strength and stickiness. It's sharp, very easy to listen to, and it's nice that it doesn't lose its atmosphere even when the volume is low. Record playback is also possible by adding a phono equalizer option board. There are no visible scratches on the exterior, etc., and it is only dull (Kobayashi Hitoshi)
Maintenance information: 2024.6.10 Operation confirmed
Accessories: remote control, instruction manual, power cable
Main specifications: 170W+170W pre/power separable W475 x H180 x D422 mm 23 kg
Richard Allen's double cone type full range unit. It's a deep, narrow range, and it's a sound that sits on your back. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: none
Main specifications: 8 ohms playback frequency band 45 to 15,000 Hz output sound pressure level 91 dB baffle aperture diameter 178 mm weight 1.8 kg
This is a 150-4H instrument model. It is based on the masterpiece unit 150-4C, and the thick sinking low frequencies and instantaneous power that can be imagined even from thick rims cannot be enjoyed without this woofer. This product is recommended for those looking for an aggressive mid-low range that makes you want to make a loud noise by storing it in a front load enclosure, etc. In addition to discoloration of the exterior and corn paper, mold and dirt on the edges, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: none
Main specifications: 38 cm ferrite playback frequency band 35 Hz to 2.5 kHz 98 dB impedance 8 ohms rim outer diameter 400 x D157 mm screw pitch 370 mm (diagonal) 13.85 kg
※Inexpensive because there is a lot of dirt and yellowing. A staple tweeter used in many famous JBL speakers. The dry, clear sound, and the vivid reality of cymbals and wind instruments are an appeal unique to this model. In addition to the exterior, corrosion, and yellowing, you can also see a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.8 operation confirmed
Accessories: Self-made stand
Main specifications: horn type tweeter unit, alnico magnet, 8 ohms (measured 8.9/9.1 ohms), crossover frequency, 2,500 Hz, allowable input, 20 W, 2 kg/book
DENON analog player. The model is easy to use and has excellent cost performance. The phono cable is detachable and can be replaced with a cable of your choice. It's also a great model for getting started. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.12 Operation confirmed
Accessories: connection cord
Main specifications: quartz servo type direct drive speed 33 1/3 rpm, 45 rpm static balance S-shaped pipe arm needle pressure adjustment range 0 to 4.0 g compatible cartridge weight 14.0 to 20.0 g W450 x H170 x D370 mm 10.1 kg
This is the L-type TH-9708, which is the highest peak step-up transformer along with cotters. The detailed, glossy, and deep sound is the true essence of analog playback. The degree is generally good. Serial 890167 (Murakoshi Yoichi)
Maintenance information: 2024.6.12 sound output confirmed
Accessories: original box
Main specifications: primary impedance: LOW 3 ohms size W16.5 x H12 x D10 cm dead weight 2.75 kg
*Set of 2 Acoliba RCA short pins. A completely non-magnetic structure using materials with excellent acoustic and vibration suppression. Sound quality is improved by shorting unused input terminals. *Never insert into RecOut or output terminals. It is not covered by the warranty even if the sound stops coming out or if it breaks down by any chance (Kobayashi Hitoshi)
Accessories: none
Unspecified set of 4 banana plugs If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 10 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Ferrite Core Noise Filters Set of 4 It is used as a countermeasure against noise emitted from cables. If you've been looking for one, go ahead. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
4560BK type domestic enclosure. The JBL woofer E145-8 was mounted when it arrived. The construction is solid. You can see a feeling of use, such as appearance, dullness, abrasions, scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: screw pitch approx. 260 mm, unit mounting aperture diameter approx. 380 mm, measured size W760 x H915 x D608 mm (actual measurement)
Missing due to spikes. Equipped with Reimyo's D/A converter DAP-777 Victor's 20bit/k2processing/IC! It lets you hear beautiful sounds with a beautiful, natural balance. XLR is #3 HOT. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.6.9 operation confirmed
Accessories: instruction manual, power cord
Main specifications: sampling rate 32 · 44.1 · 48 kHz input RCA, optical, BNC, AES with phase reversal function W430xH65xD363mm 5.3 kg
RCA → XLR cable (No. 2 HOT) 1.0m pair, new-generation minimum value guarantee, stress-free 7N copper conductor & polyolefin sheath, model with fine texture, sharp, and very careful sound. Recommended for those who want to listen closely to classical music. There is dullness on the terminals. (YONEJIMA Satoshi)
Maintenance information: 2024.6.10 continuity confirmed
Accessories: original box
Case included. Y-lug exclusive banana plug set of 4 has a monocoque structure, so there is no deterioration in sound quality inside the plug. The entire body from the tip to the cable clamp is pink gold plated, so each contact part does not deteriorate even during long-term use (Oikawa Tetsuji)
Accessories: case
Main specifications: Compatible with Y-lugs of approx. 6 mm to approx. 8 mm
The price has been drastically reduced! 2024/6/4 sales price 278,000 yen The tweeter has been replaced with a brand new one at the manufacturer! A masterpiece model of a 2-way bookshelf speaker with excellent clarity and delicate expressiveness. It's a low range with more volume than it looks, and I'm amazed at the high degree of perfection. There are scratches and scratches on the exterior. Serial 0010357, 0010358 (Fujisawa Yukishi)
Maintenance information: 2024.6.4 manufacturer maintained (both side tweeters replaced with new ones)
Accessories: Jumper cable (general purpose product)
Main specifications: 2-way 2-speaker bass reflex type 88dB 8Ω W238 x H418 x D351 mm 11.5 kg
Audio-only charging eraser. This is the 3rd generation developed through repeated improvements. The charge is reduced to zero by discharging even the slightest amount of static electricity to the human body more quickly. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: original instruction manual box
Main specifications: W345 x D340 x H25 mm
Set of 4, 32 mm diameter pinpoint base made of African ebony used for oboes, etc. Sound quality can be improved by itself or combined with the PB-10 and placed under a speaker, amplifier, etc. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Accessories: original box
Main specifications: load capacity 50 kg (4 pieces) body height 19 mm spike height 5 mm
Maintained by the manufacturer! Remote control is missing. The highest-end model of Denon's integrated CD player. The relaxed low range makes you feel analog sound quality. The operation of loading a stabilizer with a strong sense of weight is unique to top loading. The exterior has a feeling of use over time, such as dullness and small scratches. Serial 6031501867 (Hiroki Aso)
Maintenance information: 2024.6.4 maintained (tray opening/closing SW disassembly, contact cleaning laser pickup RF level check (however, repairs will not be possible if sound skips in the future or failure such as not reading TOC due to the disc), inspection of each part, operation test)
Accessories: instruction manual stabilizer original box
Main specifications: 2 analog outputs, 3 digital outputs, 2 digital inputs, W434 x H164.5 x D395 mm, 20 kg
Maintained by the manufacturer! This mono power amplifier was developed as the first full-scale high-output power amplifier for consumer use. The sound quality is unique to Accuphase, which has high power and is full of subtlety. Equipped with a digital meter that instantaneously calculates real power. By switching between modes, it is easy to drive even ultra-low impedance speakers. There is a feeling of wear on the exterior such as scratches. E1X029 E1X030 (Jun Tamai)
Maintenance information: 2024.6.6 Accuphase maintained (relay contacts replaced due to deterioration, all switches, volume, reworked due to contact cleaning, parts replaced due to stress deterioration, safety confirmation, pressure resistance test, operation characteristics check, each readjusted cleaning pair, similar treatment for matching characteristics)
Accessories: original box
Main specifications: 800W+800W (8Ω) W481 x H239 x D489 mm 47.2 kg
The price has been reduced. 2024/6/6 sales price 258,000 yen Maintained! The top Macintosh model in the golden age. You can enjoy the thick and bold Macintosh sound. Comes with an easy to handle 5-band equalizer. An easy-to-use preamp that can be combined with speakers and power amplifiers of a wide range of ages. There is a slight feeling of use such as scratches on the top plate. Serial AY3749 (Kobayashi Hitoshi)
Maintenance information: 2024.6.5 maintenance (TR in the EX Pander board, Tr replacement in the headphone board, operation check, connector caulking cleaning, solder processing) maintained (flat cable replacement, each SW and 2023.3.30 and VOL cleaning, RCA cleaning ※ internal capacitor, lamp, cable replacement (made by another company) IC replacement operation check gap cannot be completely removed) 2022.9.29 Maintained (switch, volume contact cleaning, flat cable replacement, electrolytic capacitor replacement, panel lamp replacement, power circuit tap change, 100V specification change, each input/output operation check)
Accessories: instruction manual (copy)
Main specifications: input terminals Phono 1, 2, AUX, tuner, tape 1, 2, 3 output terminals PRE OUT1, 2, TAPE OUT1, 2, W406 x H138 x D330 mm 11.8 kg
It is a USB-connected bus-powered D/D converter that uses the C-Media “CM6642” as the digital audio control IC and is compatible with high-resolution sound sources (maximum 24 bit/192 kHz) (Tamura Eiji)
Maintenance information: 2024.4.13 operation confirmed
Accessories: instruction manual, original box
Main specifications: digital input: USB TypeB terminal USB 1.1/2.0 compatible, USBAudioClass 1.0/2.0 compatible digital output: coaxial digital audio output (COAXIAL) optical digital audio input (square) compatible format: PCM maximum 24 bit 192 kHz W40 x H25 x 81 mm 90 g
The price has been drastically reduced! 2024/6/5 sales price 328,000 yen Maintained! Macintosh's first power amplifier with a balanced circuit configuration. Resolution and transparency have been added to the traditional rich, extruded tone. The blue meter, which can be said to be synonymous, is alive and well, and has plenty of presence, pleasing not only the ears but also the eyes. The exterior is dull and has small scratches. Serial JGC1730 (Yonejima Satoshi)
Maintenance information: 2024.6.5 Maintained (volume exchange (both channels) due to left channel volume shaft bending and poor contact points) lamp, electrolytic capacitor, etc. due to deterioration, acrylic removal cleaning, solder correction, connector cleaning, panel peeling correction (character area, etc. are not allowed) switch cleaning. Bias and offset check output audio check)
Accessories: copy of instruction manual
Main specifications: 300W+300W (2/4/8Ω), 600W during MONO (2/4/8Ω) W445 x H196 x D420 mm 35 kg
USB cable, 1.5m, USB Type-A & Type-B connector, this is an advanced Caldas cable with precise, high resolution, and a sense of dynamism. Comes with a quality assurance certificate (home state/authorized dealer) (Kojima Yosuke)
Accessories: Quality Assurance Certificate (Home Country/Authorized Distributor). Motobukuro