Below price (2020/11/22 selling price 19,800 yen) Osaka cable red console cabinet. The mounted motor (hole diameter 280mm) and arm (hole diameter 30mm) are unknown. There is a feeling of use such as dullness and small scratches on the body and dust cover. (Takasaki Takasaki)
Accessories: None
Main specifications: W585 (including handle) × H198 (including dust cover) × D422mm Approx. 19kg
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
I cut the price. 2021/8/30 selling price 49,800 yen rare! Decka's Gramophone Rally is Hi-fidou's first arrival. The turntable is smaller than the board, and the sound has a sense of scale in the UK with a compact body. The atmospheric design, retractable needle case and spring handle are very attractive. Unknown details (Yoichi Murakoshi)
Maintenance information: 2021.8.30 sound confirmed
Accessories: replacement needle
Main specifications: W155 × H280 (350 with the lid open) × D375mm 5.5kg
TV rack with unknown details. The upper top plate is attached to glass, and there are 2 casters on the back (2 legs in the front), 1 shelf board is about 18 mm thick, and the lower dowel has 3 places at intervals of about 32 mm. There is a feeling of use such as scratches, dents, etc., and the back plate is cut off quite a bit (Takasaki Atsushi)
Accessories: 1 shelf
Main specifications: Outer dimensions approx. W800 × H500 (450 excluding casters and legs) × D400 (upper top plate 355) mm Upper inner dimensions approx. W750 × H130mm Lower inner dimensions approx. W750 × H255 mm Approx. 25 kg
*1 bottle only Speaker stand with unknown details such as manufacturer name and model. There are appearance, abrasions, and dullness (Hitoshi Kobayashi)
Accessories: none
Main specifications: W280 × H270 × D330 mm 4.8 kg (actual measurement)
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
The disposal price has been reduced. Member discounts are not applicable. 2023/1/31 sales price 5,000 yen. This is a pair of Pioneer mid-range attenuators. Details of the mounted model etc. are unknown. Operation of conduction only has been confirmed (Murakoshi Yoichi)
Maintenance information: 2022.10.22 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/2/5 sales price 2,000 yen. *Currently sold. Specification details of only one Onkyo full range unit are unknown, but it was able to sweep and make sound. The exterior has dirt, dullness, and tape marks (Katsuji Hiura)
Maintenance information: 2023.2.5 sound output confirmed
Accessories: none
Main specifications: diameter 120 mm, depth 71 mm, screw pitch 219 mm (actual measurement), weight 1.2 kg
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
This is a self-made baffle made in a size like JBL VICOUNT or BARON. There is a hole for the 38cm unit to fit, and a hole that is thought to be for a screwdriver. In the screw hole
Accessories: none
Main specifications: woofer section screw pitch 370 mm aperture φ343 mm driver opening 133 mm external dimensions W443 x H518 x D20 mm weight approx. 1.5 kg (one side, actual measurement)
The price has been reduced. 2023.4.10 Turntable seat with sale price 2,000 yen unknown manufacturer. The material is soft and can be expected to have a vibration suppression effect. The exterior is scratched, dirty, and dull, and there is a feeling of use (Katsutsugu Hiura)
Accessories: none
Main specifications: thickness 4mm
Pair tube, PX4 equivalent tube, direct thermal triode, made in England, measured value 54/52 (rejection value 39) with white box (there is writing on the box) *The pair was judged based on the GM value measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: white box
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 44 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing was a reprint. The plate is not a box type, but only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 36 (rejection value 32) with replacement box*The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 42 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing was a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 38 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Sold 1 bottle 12AU7 compatible sphere smooth plate measurement value 106 (rejection value 56) The printing with the white box has almost disappeared, but it was determined that it was an ECC82 made in Yugoslavia from the structure*The measured value represents the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is some paint peeling on the exterior (Kobayashi Hitoshi)
Accessories: none
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is a feeling of use on the exterior, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
Unspecified XLR (male) to RCA (female) conversion plug only. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.8.14 Confirmation confirmed
Accessories: none
Main specifications: No. 2 HOT
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
The price has been reduced. 2023/9/22 Sales price 69,800 yen ※Since this is a remodeled product, it is currently sold. 3-way network. The details of the crossover are unknown. The attenuator comes with FOSTEX's AT-50H (16 ohms for the middle range only). There is a slight creak, but the sound output has been confirmed. I even took pictures of the interior. Please refer to it. There is no original terminal block (Sasaki Shota)
Maintenance information: 2023.9.22 sound output confirmed
Accessories: none
Main specifications: 3-way network W210 x H235 x D158 mm 4.5 kg (actual measurement)
※Since there are 3 missing corners, it is inexpensive. Sorbothane Square Insulators, Set of 4, Black Type When vibration is cut with sorbocaine, a phenomenon occurs where low frequencies clearly and dynamically come out of the speaker itself. The exterior is dull, etc., and there is a feeling of use (Murakoshi Yoichi)
Accessories: none
Main specifications: size 30 mm square height 10 mm
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
Unspecified board. A leather-style decorative sheet is attached to a wooden board (Tetsuji Oikawa)
Accessories: none
Main specifications: W530 x H25 x D430 mm, weight 3.4 kg (actual measurement)
manufacturer unknown. It seems to be a compatible needle for portable players whose details are unknown (Hiura Katsugu)
Maintenance information: operation unconfirmed
Accessories: none
Center speaker stand from unknown manufacturer. It is a type that is easy to handle, with wooden casters. There are threads on the exterior. (MIURA Kimiya)
Accessories: none
Main specifications: W570 ✕ H225 ✕ D440mm 4kg
1 bottle sold CV4085/6267 compatible ball mesh shield code: 8Y5 L2B measurement value 56 (rejection value 33) all the prints with the white box have disappeared, but it was determined to be EF86 based on the structure and code ※ The measured value shows the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box