Input transformer pair sale primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70H W50 × H70 × D57 mm 0.75 kg/piece (actual measurement, not including protrusions) The badge is discolored, and there are scratches in places (Kojima Yosuke)
Accessories: specifications
Input transformer pair sale primary impedance 10kΩ primary maximum superposition current DC15mA transformer ratio 1:2 primary inductance 60H maximum output voltage 150V use output tube 50, PX25, DA30, 300b, etc. W50 x H80 x D56mm 720g/piece with scratches and line damage in places and there are no TANGO badges (Kojima Yosuke)
Accessories: specifications
Output transformer pair sale single output 20W primary: 2.5/3.5/5 kΩ secondary: 8/16 Ω W78 x D83 x H120 mm approx. 2.1 kg/piece, no TANGO badges, and there are line damage or damage (Kojima Yosuke)
Accessories: none
Power transformer hammer tone color primary: 100V secondary: 320-280v-0-70V-380V/280V/280mA, 5V/3A, 2.5V-6.3V/5.2A x 2, 6.3V/3A application example: 2A3/6B4G/6L6/VT-52, etc. W120 x H120 x D105 mm approx. 5.2 kg (including actual measurement, protrusions) No TANG O badge, there are dullness and minor scratches in places (Kojima Yosuke)
Accessories: none
Choke transformer hammer tone color 15H/150mA DC resistance 155 Ω (measured 154.6 Ω) W84 x H105 x D75 mm 2.3 kg There are fine bumps and line scratches (Kojima Yosuke)
Accessories: none
Refreshed and maintained with attention to detail, such as replacing deteriorated parts! It's a beautiful item with a wooden case! An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. The wood case is made with a pan lock for replicas. Serial 53A03 (Murakoshi Yoichi)
Maintenance information: 2024.4.17 maintenance (front lamp wiring re-soldering procedure, AC cord, 1W and 1/2W replacement, TREBLE switching noise reduction measures → 1/4 W resistance added, RCA jack and vacuum tube socket re-caulking repair. Operation check with AC 100 to 117 V) 2016.2.5 maintenance completed (main volume disassembly and cleaning repair, EL.c40μf, EL.c100μf replacement, 2 additional diodes, RCA jack and VT socket caulking repair, parts check including Block.C OIL.C)
Accessories: none
Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
Transformer attenuator pair sale Ritz line attenuation -1 to -20 dB (1 dB interval) maximum input 300 W (when 8 ohms) W74 x H72 x D85 mm 1.0 kg/piece There is dullness and discoloration on the terminals (Kojima Yosuke)
Accessories: none
RCA cable 4.9 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 2.0m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while having a firm thickness in the mid to low range. The printing on the sheath often disappears and there are seal marks on the plug shell (Kojima Yosuke)
Accessories: none
RCA cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.5 m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.45m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
RCA cable 0.45m Peer Noitric plug is a standard BELDEN line cable that clearly outlines the sound while also having a firm thickness in the mid to low range (Kojima Yosuke)
Accessories: none
Full internal and external maintenance completed in 2022! This is the second generation of Tannoy's famous machine ARDEN. The warm and soft tone is attractive. It plays all kinds of music lusciously and gently. In particular, it works great with vacuum tube amplifiers, and the sense of orchestra scale and smooth playback of stringed instruments are satisfying enough to listen to. The exterior has some impact scratches and board repair marks on one side of the hakama part. Serial 003354/003047 (Fujisawa Yukishi)
Maintenance information: 2022.9.23 Maintained (terminal screws, rust removal, acid washing, cleaning. Internal connection terminal (faston) replaced with a new one. ATT (SW type) contact cleaning. A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Check the input/output waveform and balance, and check the sound output. Unit maintenance (high range side: magnetic circuit gap cleaning/center adjustment) exterior repair/polishing/oil finish. Front and rear baffles/hakama repair/painting Saran net replacement)
Accessories: saran net
Main specifications: 2 way, 1 speaker, bass reflex system, floor type specification unit 3828, crossover frequency, 1 kHz, output sound pressure level, 91.5 dB, 8 ohms, dimensions W660 x H990 x D370 mm, weight 43 kg/book
A line preamp that uses 2 WE 310A driver tubes and 1 Golden Dragon 5U4G rectifier tube. The rich tone has a strong personality reminiscent of foreign products, and the amount of information is also attractive. It is a compact preamp that has a relatively wide range and is fully compatible with modern speakers. The exterior is slightly dull. (YONEJIMA Satoshi)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: power cord
Main specifications: RCA/5R4GY x 1 WE/310A x 2 W330 x H215 x D250 mm 12.74 kg (actual measurement)