※The remote control is missing, and there is noticeable discoloration on the side, so it's cheap. Marantz's premain amplifier with an attractive, thin, and stylish design. It is a best-selling machine that has a delicate mid-high range and a well-balanced low range. Combinations with Scandinavian bookshelf speakers are also a good match, so you can choose any music genre. The exterior has stains, line scratches, and paint bald spots on the sides. Serial MZ00984231004 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: 60W+60W (8Ω), 4 line inputs, 1 phono input system (MM/MC switching), 2 tape systems, with pre-out terminals, W458 x H110 x D444 mm, 15 kg
D/A converter equipped with a variety of input terminals in a compact body. It can only be used as a headphone amplifier when using USB. Although it is reasonably priced, it is easy to use and makes you feel that the cost performance is high. The exterior has corner fittings. Serial D53061.6027010 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord
Main specifications: Compatible with digital signals USB 48 kHz, optical 96 kHz, and coaxial/balance up to 192 kHz, equipped with Barbrown PCM1796 x 2, W217 x H57 x D257 mm, 1.8 kg
In response to requests to enjoy PC audio with higher sound quality, this model received official approval from M2TECH in Italy, and incorporates the circuit of the company's USB D/D converter HiFace into the USB interface. Thus, it is compatible with sampling rates of 44.1 to 192 kHz (16 to 24 bits). Enjoy high-resolution, refined sound. The exterior is dull and scratched. Serial LL0038 (Sato Wataru)
Maintenance information: 2023.10.12 Operation confirmed (USB connection is unchecked because a dedicated driver is required)
Accessories: remote control, power cord, original box
Main specifications: W210 x H98 x D243 mm Weight 4 kg
※Operation has been confirmed, but since it is cheap, it will be handed over as is. This is a KENWOOD KA series amplifier. It has a compact and clean design, and can be placed horizontally or vertically. The sound quality is as clean as it looks, and it is recommended for those who want to enjoy music in a small space. Serial 61100061 (Sato Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: 3 input lines 12W+12W (8Ω) dimensions W171 x H67 x D207 mm weight 2 kg
By connecting between the digital output of a CD player or CD transport and the digital input of the D/A converter, an external high-precision clock generator can be connected. With the clock generator's highly accurate clock, digital signals can be transmitted, and high-freshness playback with little jitter is possible. The exterior is dull and has thin threads. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: power cord, instruction manual, original box
Main specifications: Digital input: S/PDIF1 system, RCA/BNC 2 systems Digital output: S/PDIF/RCA1 system, S/PDIF/BNC1 system Clock input terminal: BNC unbalanced terminal External dimensions W110 x H48 x D165 mm Weight 450 g
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
Details unknown. Corian board of the same size as the AIR BOW DCB44412 The size seems to be just right for amplifiers, CD players, etc. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W490 x H12 x D440 mm 4.6 kg (actual measurement)
2022 manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. You can see a feeling of use such as appearance and dullness (Kobayashi Hitoshi)
Maintenance information: 2022.11.5 manufacturer maintained (all defective transistors replaced. Earth wire installation operation test)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
This is an arm base for THORENS TD124 with unknown details. OrtoFon's RMA309 was mounted. There is a feeling of use due to appearance, dullness, mounting scratches, etc. (Kobayashi Hitoshi)
※A standard cable with only 1 speaker cable that has become synonymous with 2.0m end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
※A standard cable with only one speaker cable that has become synonymous with 4.0 m end unprocessed speaker cable. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
A heavyweight stand perfect for JBL mid-size speakers. The 3 struts and steel plates are resistant to vibration systems and support clear playback sound. It's the best match for the 4429/4319/4312 series, etc. Good appearance, dullness, and minor scratches (Kobayashi Hitoshi)
Accessories: spike, spike holder, instruction manual, original box
Main specifications: steel bottom plate dimensions W440 x H400 x D370 mm (excluding spikes), top plate dimensions W360 x D293 mm, weight 26 kg/book
SOUND BOX DOUBLE ARM CABINET FOR GARRARD301 A must-see for 301 users! Starting with the arm base for SME, Ortofon, etc., a spare base is also attached, so you can mount an arm of your choice. If you've been looking for one, please take this opportunity! The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Accessories: arm base
Main specifications: W560 x H100 x D467 mm 6.5 kg (actual measurement)
Hamilex speaker stand The large, calm dark brown wood grain and black two-tone design are stylish. It is made with a firm sense of stability and is also recommended as an introduction (Tomoho Asaine)
Accessories: none
Main specifications: W280 x H446 x D340 mm Top plate size W200 x D270 mm approx. 5 kg/unit