The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
Manufacturer maintained, including CD loader unit replacement! SA8004's successor model SACD player. It is also equipped with a USB-DAC compatible with DSD5.6MHz, so I recommend this one for those interested in high-resolution sound sources. It has excellent resolution and clear sound, just because it was born so majestically in the high-resolution era. Scratches and dullness are scattered on the front panel and top plate. Serial 15001610002186 (Murakoshi Yoichi)
Maintenance information: 2024.3.17 sound output confirmed
2024.1.19 Maintained by the manufacturer (CD loader unit replacement, optical lens cleaning, other inspections)
Accessories: remote control, instruction manual, power cable
Main specifications: SACD/CD/USB-DAC player USB-DAC compatible sampling frequency PCM44.1 to 192 kHz, DSD 2.8 to 5.6 MHz compatible digital input/pin jack, angular optical connector W440 x H106 x D341 mm 8.0 kg
Interior and exterior maintenance has been completed, including all exterior paint! One of Japan's leading monitor speakers, which continued to be made over a long period of 23 years from 1974 to 1997. The clear sound image of the Beryllium tweeter+scoker is an straightforward woofer that attractively reproduces the detailed expressions of even the latest recording discs. It is no exaggeration to say that this model is a timeless masterpiece. Serial 48037L 48037R (Hiura Katsuji)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
The price has been reduced. 2024/4/11 sales price 278,000 yen ※Saran net is out of stock. Edge has been maintained, including a brand new replacement! It is an improved model of the best-selling S3100, and inherits the technical know-how of the K2 series. The compression driver is 275 Nd, and the high range horn is equipped with a defined directivity horn. The woofer uses the ME150HS. In addition to the loud, voluminous bass, the clear high frequency, which is sharper than the original, is attractive. There is color burn on the center cap, dents and small scratches on the top surface. (MURAKOSHI Yoichi)
Maintenance information: 2024.4.10 maintenance (exterior cleaning/simple repair
Woofer edge replacement, driver maintenance (magnetic circuit gap cleaning/center adjustment, sound absorbing material replacement, replacement with a used product of the same type due to damage to one side+ terminal) unit detachment/9V battery replacement)
Accessories: instruction manual
Main specifications: 2 way 2 speaker usage unit/38cm woofer ME150HS, horn H2600-1, HF driver 275nd efficiency 95dB impedance 8 ohms dimensions W561 x H1102 x D406 mm weight 63.5 kg/bottle
The disposal price has been reduced! (Member prices are not applicable) 2024/3/7 sales price 79,800 yen Maintained! 120V specification SUMO control amplifier hosted by amplifier design genius James Bongiorno. Compared to amplifiers from the GAS era, the sound is cleaner, but the elastic low frequency bounce method is still alive and well. It is one that uses toroidal transformers and high quality parts, and makes you feel that they are particular about it. On the exterior, abrasions and line scratches are conspicuous on the top plate. Serial H (Yonejima Satoshi)
Maintenance information: 2024.3.25 Maintained (Earth float re-corrected. (*Since it is AC120 specification, a hum sound may occur at 100V)
2024.3.7 Maintained (internal inspection check, PHONO changeover SW, INPUT/TAPE changeover SW cleaning. Transistors, resistors, and capacitors can be checked. Operation check)
Accessories: No accessories
Main specifications: 6 inputs, 2 PRE OUT terminals, W480 x H40 x D220 mm, weight 8.0 kg
The price has been reduced! 2024/2/15 sales price 45,000 yen Maintained! ONKYO premain amplifier with high cost performance. A non-feedback power amplifier is used, and the power supply transformer is of high quality and carefully crafted. The power amplifier direct position allows direct input to the power amplifier via volume only. The exterior is dull. Serial 4604014114 (Yonejima Satoshi)
Maintenance information: 2024.2.15 Maintained (input selector, direct switch, etc. Switch disassemble contacts, polish contacts and apply contact cleaner. Main amplifier circuit input circuit soldering correction)
Accessories: instruction manual
Main specifications: 100W+100W (8Ω) PHONO input 1 system (MM/ MC switching) W445 x H165 x D434 mm 18.0 kg
The disposal price has been reduced. 2024/4/4 sales price 898,000 yen British original enclosure, equipped with 15 inch monitor gold! Refreshing York has regained its original tone through our refreshment maintenance. It is a speaker representing TANNOY that brings out the appeal of all kinds of sources. In particular, the beautiful, glossy sound in string and vocal music plays a sound that once you hear it, you won't be able to leave your ears (Sasaki Shota)
Maintenance information: 2024.4.4 Maintained (exterior repair/polishing/clear finish. Maintenance: net cleaning/fraying repair/repasting, sound-absorbing material removal. Unit maintenance: Magnetic circuit gap cleaning center adjustment for both low and high frequencies. Network maintenance: frequency characteristic check, ATT cleaning, terminal cleaning)
Accessories: none
Main specifications: bass reflex system floor type 15 inch coaxial 2 way (Monitor Gold 15 inch) frequency characteristics 30 Hz to 20,000 Hz crossover frequency 1,000 Hz maximum input 50 W impedance 8 ohms size W597 x H1,070 x D375 mm
The price has been reduced. 2024/3/20 sales price 10,000 yen*Since there are many scratches such as scratches on the top plate and sides, and dents on the corners, it is inexpensive and is currently sold. Technics 3-way bookshelf speaker A honeycomb flat unit is used to reproduce a unique sound field feeling. In addition to the appearance described above, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.3.19 Operation confirmed
Accessories: saran net
Main specifications: 3-way 3-speaker bass reflex 6Ω 89dB crossover frequency 2kHz, 4.5kHz W223 x H378 x D207 mm 5.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/12 sales price 39,800 yen Manufacturer maintained! Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Appearance, tobacco smell, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.12 Maintained (transistor, capacitor replacement, adjustment)
Accessories: transport lock screw
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2023/12/19 sales price 39,800 yen Manufacturer maintenance completed. Phono motors only. It is a model that is responsible for Denon's volume zone, and rotation is controlled by a voltage support system that controls the AC power supply voltage of the same motor as the office unit. It has a reputation for its highly accurate rotation and smooth sound quality. Exterior, dullness, paint peeling, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.12.19 Maintained (transistor, capacitor replacement, servo adjustment)
Accessories: none
Main specifications: Servo-type direct drive Dimensions W370 x H139 x D374 mm Weight 6.7 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 138,000 yen A rare wooden sand-filled horn from Onken (Onken). The construction is very careful and the material is moderately soft, so it is very expressive. When combined with the OS-500MT, you can enjoy a warm sound. There is a feeling of use such as scratches and paint peeling (Takasaki Atsushi)
Accessories: none
Main Specifications: Wooden Sectoral Horn Metal Throat Recommended Usage Frequency Band 500 to 25,000 Hz Compatible Unit OS-500MT W560 x H250 x D420 mm 6.82 kg
※Since there are no compatible cartridges, they have not been checked. Replacement needle compatible with Sharp record player RP-L3 If you are looking for one, please take this opportunity. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.4.12 sound output unchecked
Accessories: original box
Main specifications: Appropriate needle pressure 1.25g
※Only 1 speaker cable, 1.9 m terminal, is a cable with high sound quality and is easy to handle with an untreated titanium-containing sheath. There is a feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
A rare item. The shell that came standard with the LUSTRE/GST-1 tonearm. It's not heavy on its own, so it's easy to use, and the punch line enhances the design. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
Main specifications: 7.5 g dead weight (actual measurement)
RCA cable, 0.5 m, pearitz coated OCC copper, has a relatively clean tone, and is a product made by Wireworld that is particular about sound quality while keeping costs down. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
You can feel the dynamism typical of monsters with the 1.9 m pair end of the speaker cable that is unprocessed and inexpensive. (FUJISAWA KOSHI)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: No accessories
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
XLR noise stopper cap It is for XLR input terminals, and not only prevents broadband noise intrusion from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
Noise stopper for XLR (balanced) output terminals. It not only prevents broadband noise from entering through unused XLR terminals, but also enhances the damping effect. The material is nickel, which is a non-magnetic material. (FUJISAWA KOSHI)
Accessories: original box
RCA output terminal cap Due to its completely non-magnetic structure, when inserted into the RCA output terminal, it exhibits a high damping effect, and further improves sound image localization and signal-to-noise ratio. (FUJISAWA KOSHI)
Accessories: quartz resonator QR-8
Speaker cable with soldered 0.9 m pair ends. It is a solid sound that clearly shows the backbone of the LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Stereo mini plug to stereo mini plug cable 1.5m audio technica GATE LINK series mini plug cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Standard plug to RCA cable 2.0m used for transmission from a headphone output such as a deck to an RCA input such as an amplifier (Yoichi Murakoshi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: original box
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unchecked
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
The details of the 1.5 m optical digital cable are unknown, but it is a cable that is easy to handle and use. The exterior is dull and has a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
Optical digital cable 0.75m TEAC TOSLINK cable It is attractive because it is soft and easy to handle. There is a feeling of use such as dullness throughout (Murakoshi Yoichi)
Maintenance information: 2024.4.12 continuity confirmed
Accessories: none
The price has been reduced. 2024/3/6 sales price 15,000 yen*Currently sold because it is cheap. Small mixer with built-in processor. It can also be used as a PA processor by installing it between the mixer and power amplifier (Oikawa Tetsuji)
Maintenance information: 2024.3.6 operation confirmed
Accessories: power adapter
Main specifications: W155 x H40 x D102 mm (excluding protrusions) 540 g
The price has been reduced. 2024/4/2 sales price 36,800 yen ※48kHz, de-emission lamps are out of stock. The luminescence can be confirmed, so there is no problem when using it. It is a convenient D/A converter with volume. The mid and low frequencies are thick, and the range is moderate but it is characterized by analog-like sound quality. It effectively gently relaxes hard sound CD players. The exterior has dullness, small scratches, and missing characters in part 1 (Oikawa Tetsuji)
Maintenance information: 2024.4.2 operation confirmed (44.1/48/96 kHz sound output OK)
Accessories: none
Main specifications: 96 kHz.24 bit upconverter built-in DA converter input compatible 32, 44.1, 48, 64, 88.2, 96kHz digital input 3 systems (BNC, optical/XLR, coaxial/coaxial) analog output 1 system (RCA) W225 x H45 x D195 mm 1.12 g
The price has been reduced. 2024/4/6 sales price 69,800 yen This 1-inch screwdriver has been maintained (replaced in pairs with JBL D8R2425 due to a broken diaphragm) and has an impressive high range with a smooth, stretchy high range. Compared to the LE85, you can enjoy a natural sound with a sense of depth. As for the sound of a JBL, I get the impression that it is mild. There is a scuff mark on the back (Daiki Goto)
Maintenance information: 2024.4.6 maintained (diaphragm broken (replaced with diaphragm D8R2425)). Parts replacement DCR (38378/3.2 ohm diaphragm no scratch) DCR (38054/3.1 ohm diaphragm no scratch))
Accessories: none
Key Specifications: 1 inch driver, 8 ohm, crossover, 500 Hz, 108 dB, diameter: 114 x D98 mm, weight: 4.1 kg
The price has been reduced. 2024/4/6 sales price 79,800 yen Maintained! Standard model of JBL's 1-inch driver unit. The playback band is wide, so you can enjoy changing the network cross freely. The toughness, sound pressure, and full-bodied mid-high sound are attractive for some input. The diaphragm is original, and there are scratches in places (Kojima Yosuke)
Maintenance information: 2024.4.6 maintained (diaphragm installation adjustment
Replace the following parts. DCR (37658/6.1 ohm diaphragm no scratch) DCR (38816/5.7 ohm diaphragm no scratch)
Accessories: none
Main specifications: 1 inch driver, 500 to 20,000 Hz, 8 ohms, serial 37658/38816, W145 x D97 mm, 5.1 kg/bottle
The price has been reduced. 2024/3/11 sales price 80,000 yen The MEDIUM/LONG knob doesn't work, so it rotates idle, but it's a specification. QUAD tubular AM tuner It is designed to take power from QUAD 2. Also, although the meter is an overseas specification, it is a domestic band specification. ※This is a mono specification. In order to play on 2 channels, it is necessary to connect the pin jack to the RADIO 2 terminal of QUAD2 and press the MONO and STEREO switches at the same time (Daiki Goto)
Maintenance information: 2024.3.11 Maintained (・AM antenna ASSY added/IF/RF readjusted*Other operation checked. *When tuning with TUNE, the LCD on the right edge will open. After tuning in, it is common to listen on WIDE RANGE. Also, since the LONG WAVE circuit in this model has been removed, the LONG/MEDIUM selector is invalid and the knobs are dummy.)
Accessories: antenna cable
Main specifications: W270 x H95 x D15 mm 2.6 kg (actual measurement)
The price has been reduced. 2024/2/23 sales price 99,800 yen with box! RME audio interface. A rich 18-in/18-out audio channel, a high-performance digitally controlled preamp, and an AD/DA converter all support operation at 192 kHz. Achieving the performance required in professional settings with a half-rack size body (Sasaki Shota)
Maintenance information: 2024.2.23 Operation confirmed
Accessories: instruction manual, power cable, connection cable, setup disc, original box
Main specifications: maximum 192 kHz compatible coaxial input/output x 1 system maximum 192 kHz (S/MUX4) compatible optical input/output x 1 system analog input/output can be used simultaneously 8 channel AD/DA converter, mixing console, external effects insert function, word clock (BNC) input/output x 1 system MIDI input/output, 2 MIDI input/output systems, W216 x H46 x D145, weight 1.1 kg
*There is a gap in the display panel, which is the current situation. This is the model number DCD-1650 gold model representing DENON. Although it is the first model, the sophisticated design is beautiful. There is a sense of transparency in the mid to high frequencies, and the low frequencies are thick and gentle. In terms of functionality, the range of uses has also been expanded, such as installing a program play of up to 20 songs. There is a slight gap left in ATT. Serial 106154518 (Mizushima Itsuro)
Maintenance information: 2018/4/12 manufacturer maintained (pickup, belt, gear, relay replacement. Solder correction, operation confirmation)
Accessories: copy of instruction manual
Key Specifications: 20-bit Lambda SLC-D/A Converter with pitch control W470 x H122 x D360 mm 11.3 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/8 sales price 6,000 yen internal wiring cable 3.0 m flat single wire with silk shield flat single wire with unusual configuration. How about making your own amplifier etc. (Murakoshi Yoichi)
Maintenance information: 2024.2.8 continuity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been reduced. 2024/4/11 sales price 5,000 yen. Wood cabinet with unknown compatible models. The internal dimensions of the cabinet are W432 x H123 mm, there are 4 rubber feet on the bottom, and there is a hole (203 x 93 mm) with a metal grill in the center. There is a feeling of use and dullness (Kanai Hidetsugu)
Accessories: none
Main specifications: external dimensions W450 x H162 (including legs) x D267 mm 1.8 kg
The disposal price has been reduced. Member discounts are not applicable. 2024/2/22 sales price 8,000 yen. Self-made cabinet for DENON DP-3000. The arm was attached to the company's DA-305. When the four-square screw is removed, it is divided into 3 plates, making it easy to perform processing such as drilling. There are scratches, fading, stains on the main body, cracks, repairs, fading, stains, and adhesive tape marks on the dust cover (Kanai Hidetsugu)
Accessories: dust cover
Main specifications: W600 x H112 (H202 with dust cover) x D500 mm 12.6 kg (actual measurement, dust cover included)
The disposal price has been reduced! (Member prices are not applicable) 2024/3/2 sales price 198,000 yen Maintained! This power amplifier was released around the same time as the SG620. It combines 100W+100W driving power with good sharpness. It reproduces thick sounds unique to JBL from a simple design with only a power switch on a black body. It goes well with 70' SJBL speakers and drives exhilarating. The exterior has front scratches, bends on the power switch, scratches, and repair marks on the top plate. Serial 10623 (Yonejima Satoshi)
Maintenance information: 2024.3.2 Maintained (timer relay installed (speaker will be turned on 5 seconds after power is turned on. (Please turn off the VOL when the power is on). Power SW bending correction (deformation of the knob itself is not compatible). Power stage Tr check (Replacement of Tr in the board, level VOL, fuse holder, and C in the power supply board)
Accessories: No accessories
Main specifications: T-type circuit adopted 100W+100W W432 ✕ H132 ✕ D355mm 19kg
The price has been reduced! 2024/4/3 sales price 79,800 yen CASTLE's small studio monitor is in stock for the first time at Hi-Fi. A special version of the model that has received high praise since its inception. Even though it is crowned with a monitor, you can feel the high level of texture unique to being made in England that is easy to listen to. You won't get tired of listening to the supple sounds of vocals and strings. The exterior is a saran net, and there are small scratches on the main body. Serial BJH0009 (Yonejima Satoshi)
Maintenance information: 2024.4.3 sweep test good
Accessories: saran net
Main specifications: 2-way rear bass reflex type frequency characteristics 60Hz-20kHz output sound pressure level 88dB rated impedance 8Ω W165 x H280 x D235 mm 5.1 kg
The price has been reduced! 2024/4/9 sales price 69,800 yen with wood horn! Maintained! An integrated mid-range driver unit developed for 3-way use. It's an energetic and clear sound typical of YL. Paint peeling can be seen in places. Serial 751903, 751903 (Fujisawa Yukishi)
Maintenance information: 2024.4.9 maintained (coil roundness adjustment, noise suppression, porcelain circuit slit maintenance)
Accessories: No accessories
Main specifications: Playback frequency band 800 to 8000 Hz maximum input 40 W 8 Ω output sound pressure level 101 dB outer diameter W400 x H200 x D350 mm 3.30 kg
Vacuum tube preamp and buffer amplifier. You can enjoy the sound quality of the tube as a buffer amplifier by using or passing the volume control function depending on the device in the previous stage. Serial T11239 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: copy of instruction manual, AC adapter
Main specifications: High-end vacuum tube buffer amplifier and preamplifier (dip switch switching type) input impedance 1 MΩ (direct vacuum tube buffer) 100 kΩ (preamp volume control) W67 x H28 x D 175 mm weight 237 g
The price has been drastically reduced! 2024/3/17 sales price 69,800 yen JBL professional tweeter. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound. The exterior has dullness and small scratches due to aging. Serial 81380/52416 (Yonejima Satoshi)
Maintenance information: 2024.3.17 sweep test good
Accessories: No accessories
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
The disposal price has been reduced! (Member prices are not applicable) 2024/2/10 sales price 198,000 yen Maintained! According to the 117V specification of the tubular mono FM tuner, reception is unstable at 100V. The Japanese band has been changed, and reception sensitivity is good. It is a tuner that strongly shows the characteristics of Mackin's sound, which is thick, soft, and glossy. There is corrosion and rust throughout the exterior. Serial 292099 (Tomoho Asaine)
Maintenance information: 2024.2.10 Maintained (meter readjustment with coil and right side volume, left side lamp off replacement, IF/RF/MPX readjusted)
2018.2.22 Maintained (VT12AT7 replacement/MPX section transistor replacement/RF/IF/MPX re-adjustment)
2016.1.25 Maintained (6 additional VT shortages. 2 VT replacements 4 additional ceramic C for BAND EX Ceramic C replacement Chemical C exchange. Front lamp repair, block.C50uf x 4 replacement Step up transformer 100V ⇒ 117V added)
Accessories: 117V step up transformer
Main specifications: FM dedicated tuner W400 x H130 x D300 mm 8.6 kg
The disposal price has been reduced! (Member prices are not applicable) 2024/2/16 sales price 448,000 yen Maintained in 2022/7! Comes with a hood! This is a famous gem that has both thickness and sex appeal while making a quick sound. There is no boomy sound, which is a drawback of vacuum tube amplifiers, and it is a vintage sound that is still popular today due to its good tone and good balance. The exterior has stains, stains, paint peeling, etc. Serial 2417 (Tomoho Asaine)
Maintenance information: 2022.7.13 Maintained (replacement of 2 vacuum tubes 6CA7 deteriorated, 2 electrolytic capacitors → block capacitors replaced with 47 μF x 2, resistance 1W domestically produced → replaced with USA-made, bottom leg deterioration replacement/vacuum tube socket and RCA jack re-caulking repair. *Other operation checks have been performed (measured at 32 to 43 W SP: 8 Ω at rated output AC 100 to 117 V)
2021.3.28 Maintained (vacuum tube socket partially loosened, re-caulking repair, other RCA jack re-caulking repairs and AC BAL. /DC BAL. /BIAS realignment implemented. Rated output AC 100 to 117 V measured at 32 to 41 W SP: 8 Ω) Maintained on 2015.1.23 (2 VT6BH6 noisy replacements · block.c40/20/20 μf deterioration exchange and external coating · R1/2W 100Ω combustion exchange · Fuse3A Slowblow ⇒ 2.5A SlowBlow replacement with original · EL.C10μF ⇒ 20 μF original replacement 2 pieces ※ other parts check ( EL.c has been added to Block.c2 by another company. Other EL.C has been replaced by another company))
Accessories: none
Main specifications: vacuum tube EL34, 6CG7 x 2, 6BH6 x 2 output 35W+35W W346 x H192 x D250 mm 21.9 kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/4/2 sales price 258,000 yen A CD/SACD player that inherits the performance of the company's flagship model D-08u and is compatible with playback of file sound sources via a USB connection. It plays music well with a lot of information and clarity. A modern all-purpose machine with a high level of freshness and a good signal-to-noise ratio. The exterior has a feeling of use such as dullness. Serial G50700114 (Tomonori Asaine)
Maintenance information: 2024.4.2 operation confirmed
Accessories: Remote control instruction manual copy power cable
Main specifications: 2-channel SACD, CD player compatible sampling frequency USB input (PCM) 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192k (16, 24, 32 bit) /USB input (DSD) 2.82M, 5.64 MHz (1 bit) /Coax/OPT input 32k, 44.1k, 48k, 88.2k, 96k, 176.4k, 192 kHz (16, 20, 24 bit) W440× H133×D410mm 14.8kg
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/7 sales price 398,000 yen Exterior maintenance completed! Replace network capacitors with SOLEN film capacitors. The unit is DENTECH Tune HDP385, and the enclosure is made by Shinkosha. The unit is attached by removing the back plate, and the net does not come off the front. Classical music also goes well with symphonies. The exterior is generally beautifully finished due to maintenance. Serial AYT71012 AYT71012 (Tomonori Asaine)
Maintenance information: 2024.3.7 Maintained (exterior repair/cleaning)
Rear baffle paint saran net replacement unit maintenance (exterior cleaning, low range center adjustment, screw tightening, high frequency magnetic circuit slit cleaning/center adjustment) ATT cleaning/knob adjustment unit detachment)
2015.5.14 Maintained (network capacitors replaced with SOLEN. Unit edge replacement. Magnetic circuit overhaul and operation adjustment. Saran net partial cleaning net tear repair, complementary color correction)
Accessories: none
Main specifications: used unit HPD385 frequency characteristics 20Hz to 20kHz allowable input 85W 92dB 8Ω W600 x H1075 x D380 mm approx. 42 kg/bottle
An audiocraft headshell that uses a perfect lock pin in addition to hard aluminum molding. It brings out the full performance of the cartridge, where you can also feel the beauty of the form (Daiki Goto)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
Main specifications: Perfect Lock pin, hard aluminum molding, dead weight 13.7 g
*Currently sold. 120V specification. CROWN commercial power amplifier. It features driving power unique to professional use that lifts straight. The high braking power at high volume fully demonstrates the quality of a professional device. The exterior is dull. *There are no fixing brackets for mounting racks. Also, the AC plug has been replaced. Serial 8001294201 (Tamura Eiji)
Maintenance information: 2024.4.11 operation confirmed
Accessories: none
Main specifications: output 25W+25W (8Ω) 120V specification natural air cooling method W483 × H45 × D213 mm 4.5 kg