※It is cheap because it is in poor condition. Bookshelf 2-way speaker made by JAMO, Denmark. It makes me hear vocals comfortably in the sharp mid-range. In addition to the exterior, dents in the center cone and holes in the saran net, a feeling of use can be seen due to paint deterioration, dullness, scuffs, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 operation confirmed
Accessories: saran net
Main specifications: 2 way 3 speakers 4-8 ohms W220 x H570 x D320 mm 9.5 kg (actual measurement)
Sound output has been confirmed, and since it is inexpensive, it is currently sold. This speaker was designed for the company's FR-N Hi-MD components. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: W167 x H290 x D230 mm 3.9 kg (actual measurement)
※Inexpensive because Saran Net is out of stock. Infiniti's best-selling speaker. It's a 3-way system that brings out quite a bit of volume for a tall boy type. The bass is also sufficiently reproducible with a sense of scale coming out of the double woofer, and even pipe organs can be reproduced with plenty of room. You can see a feeling of use on the exterior, dullness, stains, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2023.6.7 operation confirmed
Accessories: copy of instruction manual, jumper, spike
Main specifications: 3-way system frequency characteristics 35 to 450,000 Hz crossover 250/3,500 Hz 6 ohms W390 × H1200 × D380 mm 40 kg
Phono cable with 0.75m pair terminal RCA-RCA 6NCU+OFC composite conductor double 2-core double shielded, cross shielded, and earth cable. The culmination of Audiocraft's cable technology, which was achieved through thorough pursuit of high sound quality. The density of sound and the sense of reality are amazing. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Phono cable is an audio cable that uses a double 2-core shield to achieve the same potential on the left and right sides of the 1.0m RCA terminals. This cable has straightforward sound quality and is easy to use. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Phono cable with 1.5m pair terminal RCA-RCA 6NCU+OFC composite conductor double 2-core double shielded, cross shielded, and earth cable. The culmination of Audiocraft's cable technology, which was achieved through thorough pursuit of high sound quality. The density of sound and the sense of reality are amazing. There is a slight feeling of use on the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Phono Cable 1.2 m RCA-RCA is a full-scale cable capable of fully floating transmission with a 7-layer double 2-core shield structure with a high-purity 6NCu hybrid core wire. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Phono cable 1.2m 5PIN DIN-RCA specification phono cable using the same wire and plug as the 6NX-TSW1010. It's well-made, and the resolution, clarity of sound, etc. are amazing. I definitely recommend it to anyone using the company's tonearm. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Phono cable with 1.0m pair terminal RCA-RCA 6NCU+OFC composite conductor double 2-core double shielded, cross shielded, and earth cable. The culmination of Audiocraft's cable technology, which was achieved through thorough pursuit of high sound quality. The density of sound and the sense of reality are amazing. There is a slight feeling of use on the exterior (Kobayashi Hitoshi)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
This classic headshell is made of magnesium alloy and has an attractive, unobtrusive sound. Overhang and left and right tilt adjustments are possible (Kanai Hidetsugu)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: none
Main specifications: dead weight 10g
YAMAHA bookshelf speakers. It is a high-resolution compatible model created by the designer of the “Soavo” series, which was highly acclaimed worldwide, and although it is an entry model, it is designed with particular attention to sound. Of course, the traditional high frequencies of the NS Series are excellent, and the fact that bass reflex dubbing, which is common on bookshelves, is suppressed is a good impression. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.4 operation confirmed
Accessories: saran net
Main specifications: 2-way bass reflex type (non-magnetic) playback frequency band 55 Hz to 45 kHz impedance 6 ohms allowable input 40 W maximum input 120 W output sound pressure level 87 dB crossover frequency 2.8 kHz W183 x H320 x D267 mm weight 6.1 kg
*Inexpensive because the pitch control lever is missing. DENON DJ specification record player. 78 rotations can be played. High-accuracy rotation control enables instantaneous start-up and braking. In order to enhance operability in the dark, the operation part is designed to light up. Cracks and small scratches can be seen on the exterior and the dust cover edge (Murakoshi Yoichi)
Maintenance information: 2024.5.4 sound output confirmed
Accessories: connecting cable, ground wire, EP adapter
Key Specifications: Direct Drive Quartz Lock W453 x H62 x D360 mm 11.8 kg
Maintained! Professional crossover 800 Hz network. It's an exhilarating sound with a good view. How about making a 2-way horn system with a 16 ohm unit? In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 8091 8074 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 rust and insulation bushings, deterioration replacement. The capacitor used for terminal cleaning is a Dayton attenuator switch contact cleaning crossover 800Hz check red terminal cap partial deterioration replacement)
Accessories: none
Main specifications: crossover frequency 800 Hz impedance 12 to 16 ohms W122 x H154 x D132 mm 1.9 kg/1 unit
RCA-XLR female cable 1.0m pair No. 2 HOT specification; details are unknown, but it seems to be well-made and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.4 continuity confirmed
Accessories: none
Maintained! A network with a crossover frequency of 7000 Hz. Ideal for MID/HIGH use in 3-way systems using the JBL 2420/2440. In addition to dullness and small scratches on the exterior, there is a feeling of use such as paint peeling. Serial 24693 24691 (Hiroki Aso)
Maintenance information: 2024.5.4 maintained (12 terminal terminal mounting screws, 24 insulating bushings replaced for deterioration. The capacitor used for terminal cleaning is a Dayton attenuator VR contact cleaning crossover 7000 Hz check)
Accessories: none
Main specifications: Crossover frequency 7 kHz allowable input (continuous program) 50 W impedance low range 12 to 16 ohms treble range 12 to 16 ohms treble attenuation/variable volume mounting hole W140 x 108 mm 0.7 kg