Maintained! A very rare BL-101 gunmetal version BL-101G+SAEC WE-407/23 golden combination. I think it would be an exaggeration to say that it is one of the pinnacle of domestic production systems. You can enjoy sharp sounds that are clearly in focus. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 02040861 (Hiroki Aso)
Maintenance information: 2024.3.28 Maintained (deteriorated capacitors, semi-fixed resistors, replacement, rotation switching, repolishing, rotation speed refinement, VR, brand new replacement, motor disassembly, bearing replacement after lubrication, exterior cleaning, insulator, rubber curing, creating a replacement product for rubber hardening; installation cabinet cleaning, main body assembly circuit adjustment, needle pressure adjustment, each rotation speed confirmation; sound output test; comprehensive operation confirmation)
Accessories: 2 platter removal screws
Main specifications: double knife edge static balance type, total length: 311 mm, effective length: 233 m, overhang, 12 mm, automatic needle pressure adjustment range: 0 to 4 g, mounting hole diameter: 30 mm (arm shaft diameter: 27 cm), maximum plate thickness: 35 mm, external dimensions: W532xH215xD420 mm, weight approx. 23 kg
First arrival! This speaker system is the highest-end model in the reference series announced on the 25th anniversary of KEF. The expansive spatial expression and fresh, glossy sound are attractive. It seems that the previous owner replaced the woofer edge with chamois leather, so durability is also safe. *The equalizer KUBE is included, but operation has not been confirmed due to 220V specifications. Even without an equalizer, it can be used as a normal speaker without any problems. Jumper cables are replacements (Oikawa Tetsuji)
Maintenance information: 2024.3.28 Operation confirmed
Accessories: dedicated equalizer KUBE 107/2
Main specifications: 3 way 4 speakers 4 ohms 90 dB W330 x H1170 x D475 mm 45.8 kg
Classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: no lead wire
Main specifications: aluminum stamping dead weight 6.8 g
Classic GRACE shell. The aluminum press processing makes it a strong, highly rigid body yet lightweight. Large finger mount. The exterior is dull and has a feeling of use (Hiroki Aso)
Maintenance information: 2024.3.28 continuity confirmed
Accessories: no lead wire
Main specifications: aluminum stamping dead weight 6.8 g
Maintained. Vacuum tube stereo power amplifier. A bright, fresh sound typical of DYNACO. The middle range is thick and has a sense of temperature, and it sounds more powerful than I expected. This is an amplifier I want to play in combination with JBL, Altec, etc. The exterior has oxidation, rust, and line damage (Fujisawa Yukishi)
Maintenance information: 2024.3.28 Maintained (Electrolytic capacitors and AC cords replaced each due to deterioration. Rubber foot replacement. Solder correction. Vacuum tube pin cleaning. Remove foreign objects. Wiring restyling. Bias check. I checked the output sound. (Although it is AC117V specification, it can operate at AC100V.)
Accessories: No accessories
Main specifications: rated output 35W+35W vacuum tube EL34 x 4 7199 x 2 GZ-34 x 1 W330 x H165 x D240 mm 12.5 kg
*The stylus is a Shure VN35MR. It combines the delicate expressive power unique to light needle pressure with an energetic, thick sound typical of Type 3. Recommended for those who listen to jazz and rock (Yamato Yuki)
Main specifications: mm type frequency range 10 Hz to 25,000 Hz output voltage 3.5 mV needle pressure 0.75 g to 1.25 g weight 6 g
Popular 3-tier rack. The metal frame is sturdy. The size is a space-saving design with the outer dimensions cut down to the last minute and the inner dimensions extended to the last minute. The tight and accurate sound quality brings out the performance of the device. The exterior has dullness, scuffs, etc. ※The upper shelf board spike screws are missing (Hiroki Aso)
Accessories: spike holder
Main specifications: 3-tier rack, load capacity up to 50 kg, shelf spacing 140/310 mm, W540 x D484 x H655mm, 31 kg
Maintained! 100V specification Macintosh's classic preamp. It reproduces bright, glossy tones with clear mid-range sounds. This model should be used by music fans who enjoy all kinds of sources. The fact that it has a full range of functions, such as a 5-band equalizer and a 7-source input selector, is also attractive. The exterior has a feeling of use such as dullness and small scratches. Serial EB8504 (Jun Tamai)
Maintenance Information: 2024.3.28 Maintained (Balance Loudness Equalizer Gari Cleaning Can't Be Removed) 2024.2.29 Maintained (Each SW Vol Cleaning Glass Panel Peeling Correction Push Button Disassembly Cleaning Lamp Deterioration Replacement Fuse Replacement Compander Pot Defect Monitor Amplifier RCH Noise → FET Defective Replacement Transistor Replacement REC Relay failure → replacement)
Accessories: copy of the manual
Main specifications: Equalizer up and down 12dB (center frequency/30Hz/150Hz/500Hz/1.5kHz/10kHz) rated output 20W+20W (8Ω) W445 x H192 x D395 mm 11.8 kg
※There is no problem with operation, but since it is cheap, it will be handed over as is. Compact and lightweight phono equalizer. Please use it with a Miji component or premain amplifier without a phono input. It's also perfect as an introductory machine. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.2.19 Operation confirmed
Accessories: AC power adapter
Main specifications: MM dedicated phono equalizer W70 x H30 x D92 mm 160 g
It is a beautiful item with a special caster CS-120! ※The column length is 15 cm/20 cm/25 cm. 4-tier audio rack made by TAOC High density MDF material is used. It is in excellent condition. (Yamato Yuki)
Accessories: instruction manual felt hex wrench TAOC emblem
Main specifications: external dimensions W600 x H785 x D520 mm (including casters), weight 23 kg (both measured)
Comes with original box! This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, needle cover, mounting screw, brush
Main specifications: mm type output voltage 5.5 mV frequency characteristics 20 to 25,000 Hz internal resistance 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
SPU-GE reprint model, popular oval needle type. It is a cartridge where you can feel the depth of analog. The rich texture and thick outline set it apart from other cartridges. Serial 834917 (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: stylus cover
Main specifications: G shell oval needle MC type output 0.2 mV suitable needle pressure 4 g internal impedance 2 ohms dead weight 30 g
Lots of accessories! The MC30S (MC30 Supreme), the upper model of the MC20S (MC30 Supreme) has a high output of 0.5 mV, which not only has a sense of dynamism and power, but is also characterized by a delicate and elegant high frequency. In classical music such as jazz and rock, there is a sense of depth in the performance, and it stretches well, and you can feel the luster of stringed instruments, etc. There is a feeling of use on the exterior, such as dullness and scratches on the body (Hiroki Aso)
Maintenance information: 2024.3.28 sound output checked
Accessories: instruction manual, original box, lead wire, simple needle pressure gauge, brush, needle cover, mounting screws
Main specifications: MC type output 0.5 mV internal impedance 5 ohms needle pressure 1.8 g to 2.2 g dead weight 10.7 g