This model commemorates the 250th anniversary of J.S. Bach's death. Uses a 6N silver wire coil. It is a cartridge that excels in even more delicate spatial expression while retaining the feel of an orthophone. The know-how of the masterpiece Jupiter has been fully introduced, and the high cost performance stands out. The cantilever is slightly to the right, and there is a small scratch and dullness on the body (Sasaki Shota)
Maintenance information: 2024.4.25 Sound output operation confirmed
Accessories: nothing
Main specifications: output voltage 0.45 mV frequency characteristics 20 Hz to 35 kHz internal resistance value 5 ohms, suitable elliptical needle pressure 2.5 g, dead weight 10 g
※The nail on the needle cover is broken, so it cannot be locked. This is BLUE from the 2M series. Ortofon's popular series with a wide range and vibrant sound. It makes you enjoy sharp sounds from popular to jazz (Hiroki Aso)
Maintenance information: 2024.4.25 storefront operation confirmed
Accessories: original box
※Since the cantilever is slightly raised, it is inexpensive. Mid-range models in the MC Star series, which come in 3 types. Both models have different sounds, and they are all unique, but 20W is a model that places particular emphasis on the mid-range. The sound is warm in tone, and has an extrusive, and comfortable sound that goes through the SPU. The wooden body made of Yamanaka lacquer, which is a traditional Japanese craft, is also beautiful.
Maintenance Information: 2024.4.25 Operation confirmed
Accessories: none
Main specifications: MC type output voltage 0.5 mV suitable needle pressure 2.3 g recommended load impedance 10 to 200 ohms dead weight 10.5 g
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from the back of a groove on a record board (Yasuhito Koshihama)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: aluminum press processing actual measurement 19g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a screw scratch (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
A thick, highly rigid, heavyweight shell prepared by Orthophone for cartridges other than the SPU series. The cartridge ground surface is flat, has excellent adhesion, and is an easy-to-use head shell (Oikawa Tetsuji)
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
A head shell with a round tip that matches the MC Jubilee and Kontrapunkt cartridge shapes. Its own weight is 14.6g, which is a bit heavy (Yasuhito Koshihama)
Main specifications: machined aluminum block, dead weight 14.6 g
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
Maintained! An exclusive popular preamp. It is packed with attention to communication from engineers, such as the quadruple attenuator volume with 22 contacts and the use of copper foil glass epoxy substrates. Oxygen-free copper wire is used as internal wiring material. The abundance of inputs, such as 3 PHONO systems and 3 AUX systems, is also attractive. The high quality, which is thick and roomy, is attractive. There are scratches and scratches on the exterior. Serial 001000885 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (all lever switch disassembly contacts polished contact grease applied due to poor lever switch contact. Rotary switch contact cleaning. Check the operation of each input/output. (Capacitors have been maintained)
Accessories: No accessories
Main specifications: 22 contact attenuator PHONO 3 system TUNER 1 system AUX 3 TAPE system 3 stage switchable attenuator dimensions W468 x H206 x D342 mm weight 12.5 kg
Maintained! Comes with a cabinet. Accuphase quartz rock synthesizer FM tuner. A pulse tuning system is used that enables manual station selection with the same feeling as the varicone system. You can enjoy sharp and clear sound typical of Accuphase. The exterior has bumps, scratches, etc. Serial JOY347 (Yonejima Satoshi)
Maintenance information: 2024.4.25 Maintained (system control board, battery fluid leak pattern, non-woven repair later, jumper wire connection due to nonwoven disconnection of the tuning circuit. Corrosion repair putter check (Check reception)
Accessories: instruction manual, power cable
Main specifications: synthesizer FM tuner reception frequency 76.1 MHz to 89.9 MHz tuning system quartz rock frequency synthesizer system manual pulse tuning memory 6 stations W445 x H128 (including legs) x D370 mm 8.4 kg
It is a model designed to further enhance the results of the regular type, with the main focus on thoroughly eliminating sound quality deterioration factors such as mechanical vibration and electrical vibration. 4-tier rack for analog players with decoupler The exterior has dullness and scratches (Satoshi Yonejima)
Accessories: No accessories
Main specifications: shelf size/1st tier 160mm/ 2nd tier 180mm/ 3rd tier 60mm W600 ✕ H540 ✕ D475mm 8.8 kg
※The pole size is 32 mm in diameter, but the casters are inexpensive because they are 19 mm in diameter. Quadraspires 4-tier rack. In addition to excellent design, the structure based on theory is also attractive, as the shelf board has sufficient rigidity even though it has a simple structure, and is subtly curved and cut so that vibration components gather at the four corners. The exterior is dirty and dull (Yonejima Satoshi)
Accessories: casters
Main specifications: W588 x H515 x D395 mm (actual measurement) 1st stage 100 mm, 2nd stage 140 mm, 3rd stage 180 mm 12 kg (actual measurement)