A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g
FR heavyweight headshell In combination with a heavy needle and pressure needle, it exhibits excellent tracing performance, such as digging up from the back of a groove on a record board (Yasuhito Koshihama)
Maintenance information: 2024.4.25 continuity confirmed
Accessories: none
Main specifications: aluminum press processing actual measurement 19g
The price has been reduced! 2024/4/21 sales price 12,000 yen DENON tonearm DA-401 exclusive headshell. They rarely appear separately, so if you are looking for one, please take this opportunity (Tomoho Asaine)
Maintenance information: 2024.4.21 continuity confirmed
Accessories: none
Main specifications: dead weight 4 g
A head shell with a round tip that matches the MC Jubilee and Kontrapunkt cartridge shapes. Its own weight is 14.6g, which is a bit heavy (Yasuhito Koshihama)
Main specifications: machined aluminum block, dead weight 14.6 g
One of the few straight arm headshells. The small die-cast aluminum has high rigidity, and in combination with the straight arm, you can enjoy tight analog sound. There is little feeling of use and it is generally good (Mizushima Itsuro)
Maintenance information: 2024.4.4 continuity confirmed
Accessories: none
Main specifications: aluminum die-cast straight arm for weight 5g
The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Mizushima Itsuro)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, self-weight 10.6 g
Coral headshell The weight has been reduced, and the mounting position can also be adjusted, so it is an easy shell to handle (Oikawa Tetsuji)
Main specifications: dead weight approx. 14g
Heavyweight metallic design headshell Technihard materials are used for surface treatment. It can be expected to tighten the sound (Tamura Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum 15g
A thick, highly rigid, heavyweight shell prepared by Orthophone for cartridges other than the SPU series. The cartridge ground surface is flat, has excellent adhesion, and is an easy-to-use head shell (Oikawa Tetsuji)
Accessories: none
Main specifications: machined aluminum alloy, self-weight 16g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of highly rigid die-cast aluminum and brings out the characteristics of the cartridge (Murakoshi Yoichi)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of aluminum die-cast with high rigidity, and brings out the characteristics of the cartridge (Hiroki Aso)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Orthophone's classic headshell. The finger tips are ergonomically designed and are designed to be easy to operate. It is light in weight and is compatible with various cartridges and tonearms. There is a screw scratch (Oikawa Tetsuji)
Accessories: none
Main specifications: aluminum gold-plated terminals, dead weight 9.4 g
Denon's classic shell. This is a genuine DA-305 shell. There is also plenty of room around the lead wire, and various cartridges can be attached. There is a feeling of use on the exterior such as small scratches and dullness (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: dead weight 7g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Denon's classic shell. This is a genuine DA-305 shell. There is plenty of room around the lead wire, and various cartridges can be attached (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7g
Alloy die-cast headshell I like the simple design. This is one that is easy to match with various cartridges (Shota Sasaki)
Main specifications: magnesium alloy, die-cast, gold-plated contacts, dead weight 6 g
Undetailed, headshell similar to the exterior of the Technics SH-98D. It's a simple dish that seems to be easy to use (Oikawa Tetsuji)
Accessories: none
Main specifications: dead weight 7.3 g (actual measurement)
This is a genuine shell that comes with the DP-1300M/DP-500M. Black model with meat removal processing. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
An aluminum-pressed headshell very similar to SME's S-2 and Sansui. It is a split finger type. There is a mark where the logo has come off on the front (Murakoshi Yoichi)
Maintenance information: 2024.3.7 sound output confirmed
Accessories: none
Main specifications: dead weight 9g
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. The exterior and finger tips are straight, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 9g