The price has been drastically reduced. 2024/4/20 sales price 248,000 yen Genuine AC is out of stock. An esoteric isolation transformer. Stress-free 6N copper wire is used as the coil wire. We are pursuing the ultimate clean power supply environment by using the same extra thick 6N copper single wire for internal wiring. In addition to scratches on the exterior and top plate, dullness and a feeling of use can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Operation confirmation (power can be turned on)
Accessories: instruction manual
Main specifications: maximum rated power 1,500 W, number of outlets 6 external dimensions W246 x H219 x D422 mm, mass 31 kg
※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi)
Maintenance information: 2024.4.22 operation confirmed
Accessories: remote control, instruction manual (English characters), power cord, mounting hardware
Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
Line transformer using TANGO's input transformer, NN-600-600. The overall sound resolution is increased, and the sense of sound pressure is also enhanced. Recommended for those using speakers with horn drivers. TANGO badges are discolored, and there are tape marks and bumps on the chassis (Kojima Yosuke)
Maintenance information: 2024.4.18 Operation confirmed
Accessories: none
Main specifications: primary impedance 600 Ω (150 Ω split) secondary impedance 600 KΩ (150 kΩ split) primary inductance 70 H W140 × H110 × D100 mm 1.8 kg (actual measurement, not including protrusions)
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/11 sales price 99,800 yen This is the ultimate version of the P-1. It is a pure A grade specification, which is rare for a headphone amplifier, and you can enjoy more detailed and clear playback sound. There is a thin line scratch on the top plate and a small scratch on the upper front, but there are no noticeable scratches (Sasaki Shota)
Maintenance information: 2024.1.11 Sound output operation confirmed
Accessories: copy of manual, power cable
Main specifications: 2W+2W (8Ω) 1W+1W (16Ω) high sound quality feedback circuit “ODNF3.0A”, 2 headphone outputs, 1 RCA/XLR input each, W440 x H82 x D408 mm 8.3 kg
Disposal prices have been reduced! (Member price does not apply) 2023/11/7 sales price 79,800 yen ※ It's cheap because it's not in very good condition. Comes with an ottoman Among the company's many stress-free chairs, this is the most compact model and has a simple design that fits any room. It is firm and comfortable to sit on and supports your lower back. As for the exterior, the leather is worn out and has wrinkles and peeling. (MIURA Kimiya)
Accessories: ottoman
Main specifications: W700 x H940 x D700 mm, seat height 380 mm, ottoman: W550 x H400 x D420 mm
The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji)
Maintenance information: 2024.4.16 Operation confirmed
Accessories: original box, connection cable
Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
A line transformer equipped with 2 WE repeat coil 111C transformers (transformers for telephone voice relay). Although the range is narrow, the thickness has increased and the analog-like sound quality is very pleasant to the ears. There is a small scar on the dust (Oikawa Tetsuji)
Maintenance information: 2024.4.22 operation confirmed
Main specifications: input/van lance x 1 system unbalance x 1 system output/van lance x 1 system unbalance x 1 system 150 x 160 x 155 mm 6.66 kg (actual measurement)
The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
A network adapter that converts USB 3.0 to SFP (only compatible with 1 Gbps) SFP ports can be added to Windows PCs or laptops without wired LAN ports. There is a line scratch on the bottom. *SFP module and 5V power adapter are sold separately. (FUJISAWA KOSHI)
Accessories: original box
Key specs: https://www.oliospec.com/shop/shopdetail.html?brandcode=000000010613&search=USB-SFP&sort =
The price has been reduced. 2022/12/3 sales price 49,800 yen ※ It is cheap because the leather part is in a fairly poor condition with cracks, wrinkles, peeling seams, etc. Many audiophiles love this recliner. You can easily set the reclining position with adjustments under the left and right handrails. I definitely recommend it for relaxing listening to music at home. The leather color is black, and the base color is brown, giving it a relaxed atmosphere. Comes with an ottoman. The seat surface is also depressed due to deterioration (Murakoshi Yoichi)
Accessories: ottoman
MICRO's rare copper turntable seat. The sound has the sharpness and sense of speed peculiar to metal. The exterior has line scratches on the surface (Sasaki Shota)
Accessories: none
Main specifications: dimensions 294 in diameter x 3 mm in thickness, weight 1.65 kg
The price has been reduced. 2022.12.5 sales price 39,800 yen Arm base for the company's tone arms MH-104S and MH-124S. Machined stainless steel gives it a sense of luxury (Sasaki Shota)
Accessories: none
Main specifications: 24mmbase stainless steel machined 340g mounting board hole φ25mm mounting board thickness ~ 20mm
The price has been reduced! 2024/3/22 sales price 29,800 yen The tuning hole uniquely arranged on Oyaide's turntable plate thoroughly eliminates unnecessary vibrations that disrupt the record board's trace, and can also be used in combination with a stabilizer to correct the warpage of the record board and expect an appropriate trace. There are small scratches and dullness on the exterior (Tamura Eiji)
Accessories: instruction manual, original box
Main specifications: dimensions: 294 mm, thickest part: 5 mm, 670 g
※It has a cigarette smell, so it's cheap. A rare Audiocraft RCA to XLR conversion converter has arrived. A useful item for converting an RCA pin cable into a balanced cable. The exterior has paint bald spots, dirt marks, etc. Serial 43217 (Yonejima Satoshi)
Maintenance information: 2024.4.17 operation confirmed
Accessories: none
Main specifications: W200×H75×D300mm 2.7 kg
When connected to a speaker, it reduces speaker impedance fluctuations in the mid to high range. More faithful speaker driving is possible, speaker resolution and stand-up are improved, and natural afterglow is also reproduced. There are scratches on the exterior. Serial 00753, 00754 (Fujisawa Yukishi)
Accessories: instruction manual, original box
Main specifications: W100 x H47 x D117 mm approx. 190 g/piece
Speaker selector that can be switched by operating a remote control. It is a 3-system switchable type using a large speaker relay, and can also be switched with the main unit button. The exterior is scratched and dull, and there is a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: remote control power cord
Main specifications: 3-system switching W297 x H79 x D137 mm 1.8 kg
Spike receiver for large tall speakers with spikes Use it by sticking it into a small hole φ5.5 mm.
Can also be used as a foot for an audio rack or speaker stand (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter φ50mm thickness 12.65mm
This tap was developed for the purpose of removing high-frequency noise from the outside, reducing internal radiation noise, removing electromagnetic waves, and reducing electrical contact resistance. The sound quality is mild and thick (Oikawa Tetsuji)
Maintenance information: 2024.4.20 continuity confirmed
Accessories: none
Main specifications: rated capacity 15A (output outlet), 4 ports, Hubbell hospital grade, W170 x H90 x D170 mm, weight 2 kg
The price has been drastically reduced. 2024/1/30 sales price 25,000 yen. This is a wood cabinet for large panel power amplifiers such as the Macintosh MC7300. The front interior dimensions are 432 x 166 mm. The product is compatible with non-panlock specifications, and the panlock is missing. You can see a feeling of use, such as appearance, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Accessories: 4 panlock mounting screws
Main specifications: W467 x H203 x D368 mm 5 kg (actual measurement)
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/7 sales price 25,000 yen*Exclusive earth cable is out of stock. Since the cable is soldered to the connection part, it is inexpensive. A sandwich structure with an electromagnetic wave absorbing sheet sandwiched between two aluminum panels. Both sides of the aluminum panel are dark gray and light gray and can be reversed for use. There are line scratches and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W470 x H7 x D420 mm weight 3.4 kg
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 25,000 yen*Since the output terminal has been remodeled to an XLR terminal, it is inexpensive. It is a pretty niche product that uses 2 stereo amplifiers so that it can be used like a mono amplifier. Actually, it seems to be a product intended for use with the company's 405-2. There is a lot of dullness on the exterior due to aging (Fujisawa Yukishi)
Maintenance information: 2023.6.4 sound output confirmed
Accessories: none
Main specifications: W80xH47xD140mm approx. 1.0 kg/unit
The price has been reduced! 2024/4/20 sales price 20,000 yen Fisher (male) terminal pair. Great for 3-pin CELLO and VIOLA users. There is a feeling of use on the exterior such as scratches (Tomonori Asae)
Accessories: No accessories
※It is inexpensive because it has a cigarette smell, dirt, and deposits. Premium power amplifier/speaker selector. It uses a silver-plated contact mechanical switch to convey the original sound quality as it is. As a speaker selector, you can switch and select up to 3 pairs of speakers from one power amplifier output. Alternatively, as an amplifier selector, you can switch and select up to 3 power amplifier outputs for a pair of speakers. There are scratches, adhesions, and dirt on the exterior (Fujisawa Yukishi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: No accessories
Main specifications: 3 inputs/1 output system, or 1 input/3 output systems, continuous passing power 250W (8Ω), W250 x D142 x H64 mm, weight 2.4 kg
The price has been reduced. L2024/2/10 sales price 19,800 yen arm pipe storage keeper It stores the company's 4 arm pipes and is compatible with both AC-300MK2, 400MK2, 3000MC, and 4000MC lengths. Main weights, sub weights, etc. can also be inserted. There is dirt and dullness (Daiki Goto)
Accessories: none
Main specifications: W430 x H40 x D135 mm 740 g (actual measurement)
The price has been reduced. 2022 10/1 selling price 20,000 yen arm base with unknown details. It is similar to the micro A-1201, etc., but the diameter of the hole is about 19mm (Oikawa Tetsuji)
Accessories: none
Main specifications: 1.6 kg (actual measurement)
The price has been reduced. 2023/6/27 sales price 15,000 yen Qables Potaan is 192 kHz compatible. It supports up to 192 kHz/24 bit via the SPDIF digital input terminal and 48 kHz/16 bit via USB. For those looking for high quality sound anywhere easily (Oikawa Tetsuji)
Maintenance Information: 2023.6.27 Operation confirmed
Accessories: connection cord, case
Main specifications: W70 x H23 x D126 mm 200 g
Unknown wood cabinet. Cushioning material is attached to the inside. There are small scratches and dull stains (Sasaki Shota)
Accessories: none
Main specifications: W470 x H120 x D390 mm Weight 1.8 kg (actual measurement)
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There is dullness (Daiki Goto)
Maintenance information: 2024.4.22 continuity confirmed
Accessories: power cable
Main specifications: W160 x H58 x D195 mm weight 882 g
The disposal price has been reduced. Member prices are not applicable. 2023/12/10 sales price 18,000 yen USB isolator Input to USB Type-B and output from USB Type-A. USB low-speed (1.5Mbps) and full-speed (12Mbps) dedicated hubs. Please refer to the manufacturer's website for details. https://octy.co.jp/products/usb20.html ※5V power supply is not included. Please prepare separately (Oikawa Tetsuji)
Maintenance information: 2023.12.10 storefront operation confirmed (5V test power supply is supplied, and sound output operation confirmed by connecting between PC and USB DAC)
Accessories: *USB microB 5V power supply is not included. Please use your own USB adapter or the like.
Main specifications: 110mm×64mm×30mm 230g
A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There are scratches and scratches on the exterior. Serial T912 (Fujisawa Yukishi)
Maintenance information: 2024.4.21 operation confirmed
Accessories: power cord
Main specifications: W160 x H58 x D195 mm weight 882 g
Unspecified wood cabinet. There is a hit scratch (Goto Daiki)
Accessories: none
Main specifications: outer dimensions W45 x D260 x H195 mm weight 2.4 kg inner dimensions W370 x H145 mm (actual measurements)
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
Unspecified arm stabilizer. It was used on DA-308 (Daiki Goto)
Accessories: none
Main specifications: diameter 48 mm height 49 mm weight 800 g screw hole diameter 19 mm (actual measurement)
A mini model of a prop type insulator with a 3-piece set with an integrated spike and saucer. It has a double spike structure with 2 layers of spikes encapsulated in a brass body, filling the gap between the cup and spike with a special liquid, dramatically increasing the insulation effect. There is dullness and dirt (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: diameter 27 x height 21 mm, weight 90 g/piece, load capacity 15 kg/piece (*However, the recommended load for effectiveness is approximately 7 kg as a guide)
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
100mm pole (19mm diameter) set of 4 black color Please use it to add shelves or extend poles for Q4, Q4D, etc. There are abrasions and line scratches in places (Mizusaki Ryo)
Accessories: none
Key Specifications: 100mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole
Set of 4 This is a black pole, an option for 180mm pole (19mm diameter) quadraspires. Please use it as an additional pole for Q4, Q4D, etc. There are small scratches and dullness on the exterior (Mizusaki Ryo)
Accessories: none
Key Specifications: 180mm length/19mm diameter optional pole