The disposal price has been reduced. Member discounts are not applicable. 2024/2/9 sales price 7,000 yen. Solder is a 10m alpha vintage solder. It seems to be from the early 60's (Murakoshi Yoichi)
Accessories: none
Driver transformer pair sold response frequency: 200 to 15,000 Hz only conduction confirmed, other specifications unknown W58 × H74 × D55 mm approx. 0.5 kg/piece (actual measurement, not including protrusions) abrasion There is paint peeling, but the terminals are in good condition (Kojima Yosuke)
Accessories: none
Fostex metallized polypropylene film capacitors, used set of 2. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: unchecked
Accessories: none
Key Specifications: 1.0 μF capacity
Power Transformer sold 1 piece Osaka High Wave Power Transformer Primary: 100-110V/3A Secondary: 12-18-20-24V/5A W97 × H81 × D96mm Approximately 3kg (Measured, Not Including Projection) Source Box with (Yosuke Kojima)
Accessories: original box
Power transformer primary: 100-117V secondary: 12.6V/1A, 6.3V/2A x 2, 40V/50mA, -10-0-10-130-150V/DC180mA ((VOLTAGE DOUBLER) /AC0.6A (CONTINUOUS)) W100 x H75 x D85 mm approx. 3.4 kg (actual measurement, not including protrusions) There is a lot of floating on the cover rust part (Kojima Yosuke)
Accessories: none
Output transparent sale push pull output 35W primary: 8kΩ secondary: 4-8-16Ω usage: 7189 app, etc. W82 x H72 x D82 mm approx. 1.6 kg/piece (actual measurement, not including protrusions) The plate is often scratched, printing is erased a lot, and there are paint floats due to rust in places (Kojima Yosuke)
Accessories: none
Power transformer used in MQ60 vacuum tube amplifiers Primary: 100V Secondary: 360V/280mA 100V/350mA 60V/70mA CT-6.3 V/2A W104 × H97 x D87 mm approx. 4.3 kg (actual measurement, not including protrusions) (Yosuke Kojima)
Output transformer sold 1 piece for push-pull output 10W Primary: 10kΩ Secondary: 3/7/12Ω W75 × H93 × D66mm 1.3 kg (measurement, not including protrusion) There are scratches in some places, paint peeling will (Yosuke Kojima)
Accessories: None
Power transformer 1st order: 100V 2nd order: 220V-200V-180V-180V-220V/DC190ma, 6.3V-2.5V/3A, 6.3V-2.5V/3A, 6.3V-5V/3A, 5V/3A W102 × H77 × D86 mm approx. 3.2 kg (actual measurement, not including protrusions) There are scratches in places on the cover with the original box (Kojima Yosuke)
Accessories: original box
Power transformer primary: 100V secondary: 500-450-400-350-300-400-450-500V/DC120mA, 6.3-5V/3A, 6.3V/2A, 7.5-6.3-5-4-2.5V/3A x 2 W120 x H92 x D105 mm 4.8 kg with original box, it seems to be an unused item! (KOJIMA Yosuke)
Power transformer primary: 100V secondary: 350v-320v-290 v-70v-290 v-320v-350V/DC150mA, 6.3V-2.5V/3A x 2, 6.3V-5V/3A with original box (Kojima Yosuke)
Accessories: original box
Unused item! Power transformer primary: 90-100-110V secondary: 6.3V/3A x 2, 400-325-0-325-400V/230mA, 5V/3A W122 x H150 x D102 mm 5.4 kg (actual measurement) (Kojima Yosuke)
Accessories: none
Choke transformer 10H/120mA DC resistance 110Ω (actual measurement 112.2Ω) W68 x H91 x D71 mm 1.6 kg The paint is peeling off in places, and there are rust stains (Kojima Yosuke)
Accessories: none
* Since there are difficulties with the attachment part on both sides, it is inexpensive. Line matching transformer sold primary: 600 ohms, output 10 dBm, frequency range, 50 to 10 kHz, W44 x H65 mm, 0.25 kg/piece, the head of the mounting bolt on one side is flying off, and there is distortion in the screw hole on the other side (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω - CT Secondary: 600 ohms Output 10 dBm Frequency Range 50 to 10 kHz W44 x H65 mm 0.25 kg/piece There are bumps and paint peeling in places (Yosuke Kojima)
Accessories: none
Output transformer sold 1 piece Primary: 14 kPPΩ Secondary: 600 Ω WW76 × H71 × D43 mm 0.6 kg (actual measurement, protrusions not included) There are paint peeling and seal marks in places (Kojima Yosuke)
Accessories: none
* It seems to be an output transformer from the specifications; sold 1 piece, primary: 10 kΩ, secondary: 600 ohms, W76 x H71 x D43 mm, 0.6 kg (actual measurement, not including protrusions), there is paint peeling in places (Kojima Yosuke)
Accessories: none
Line matching transformer sold 1 piece Primary: 600 Ω Secondary: 600 Ω Winding Ratio 1:1 Output 10 dBm Frequency Range 50 to 10 kHz W34 x H42 x D22 mm Approx. 0.1 kg (Yosuke Kojima)
Accessories: none
Output transformer sold 1 piece Primary: 5 kΩ Secondary: 6 Ω/600 Ω NFB W68 × H91 × D72 mm 1.28 kg (actual measurement, not including protrusions). From specifications, it seems to be a line output transformer. There are rust spots, scratches, and paint peeling in places (Kojima Yosuke)
Accessories: none
Screwdriver Transpair sale 1st order: 5 kΩ 2nd order: 5 kΩ CT/1.25 ksplit DC30mA 50 to 15 kHz output level 30dBm W76 × H83 × D44mm 0.7 kg (actual measurement, including protrusions) One side with original box seems to be an unused item due to the state of the terminal! (KOJIMA Yosuke)
Accessories: original box
Power transformer primary: 100V/1.5A secondary: 320-280-0-70-270-320V/
AC0.16A 5V/3A 2.5V/3A ×2 6.3V/3A W109 × H110 × D95 mm 3.7 kg There is dullness and line damage in places (Kojima Yosuke)
Accessories: none
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Unused item! Power supply/heater transformer custom product primary: 100V secondary: 5V/3A, 6.3V/2.5A, 600-550-535-0-80-535-80-535-550-600V/0.17A, CT-5V/1.5A × 2 W122 x H87 x D105 mm 5.3 kg (actual measurement, not including protrusions) mounting nut with original box (Kojima Yosuke)
Accessories: mounting nuts, original box
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Power transformer primary: 100-105V secondary: 24-0-24V/0.18A, 6.3V/0.6A, 25-22.5-20-0-20-22.5-25V/2.6A W100 x H80 x D84 mm 3.2 kg (actual measurement, not including protrusions) There is dullness and abrasions on the body with stays (Kojima Yosuke)
Accessories: stay (main unit attached)
Output transparent pair for push-pull output 40W primary: 10 kΩ secondary: 4-8-16 ohms Usage: VT-62, VT-25, 6F6, 6V6, etc. W83 x H105 x D78 mm approx. 2.3 kg/piece (actual measurement, not including protrusions) with original box with scuffs and tape marks in places (Kojima Yosuke)
Accessories: original box
Output transparent pair for push-pull output 40W primary: 8kΩ secondary: 4-8-16 ohms W83 x H104 x D78 mm 2.3 kg/piece with original box (no label on one side) There are scuffs and line scratches in places (Kojima Yosuke)
Accessories: original box
Output transformer sale push pull output 40W primary: 5KΩ secondary: 4-8-16Ω W84 x H119 x D79 mm 2.3 kg/piece No TANGO badge, there are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none
Power transformer primary: 100V secondary: 5V/3A, 2.5-6.3V/5.2 A x 2, 6.3V/3A, 360-400-450V/170mA W120 x H95 x D105 mm 5.3 kg (not including protrusions) There are abrasions and line scratches in places (Kojima Yosuke)
Accessories: none