Payment and point member | Payment methods | Shipping methods | Warranty policy | Shopping procedure
- All
- All hardware
- All software
- Other
- Amplifiers
- Integrated amplifiers
- Control amplifiers (transister)
- Control amplifiers (tube type)
- Power amplifiers (transister)
- Power amplifiers (tube type)
- Channel dividers
- Tuners
- Other amplifiers
- Channel divider boad
- Integrated amplifiers (transister)
- Integrated amplifiers (tube type)
- Speakers
- Speakers (foreign companies)
- Speakers (Japanese companies)
- Full range units
- Woofers
- Drivers
- Tweeters
- Horns
- Enclosures
- Networks
- Speaker accessories
- Analog equipment
- Turntables
- Tonearms
- Step-up transformers
- Head amplifiers
- Phono equalizers
- Cartridges
- Headshells
- Phonograph
- Digital equipment
- D/A converters
- DAT decks
- MD players
- LD players
- DVD players
- CD players
- CD transports
- Network players
- Tapes
- Cassette decks
- Reel-to-reel decks
- Other tapes
- Accessories
- Accessories
- Cables
- Insulators
- Racks
- Headphone
- Parts
- Parts
- Tubes
- Manual
- Audio set
- Audio set
- Other audios
- Other audio
- Records
- LP jazz
- LP jazz vocal
- LP classic
- LP foreign music
- LP Japanese music
- Single records
- SP
- Other LPs
- Other soft
- Tapes
- Reel-to-reel tape
- Reel-to-reel tape jazz
- Reel-to-reel tape classic
- Other reel-to-reel tape
- Blank cassette tapes
- LD/DVD
- Laser disk
- DVD
- VHS
- Laser disk jazz
- Laser disk classic
- Other laser disk
- Laser disk movie
- CD
- CD jazz
- CD jazz vocal
- CD classic
- CD foreign music
- CD Japaese music
- Single CD
- Other CD
- Books
- Magazines
- STEREO SOUND
- MJ
- Other books
- Swing journal
- STEREO SOUND EX
- TUBE KINGDOM
- TAPE SOUND
- analog
- AUDIO ACCESSORY
- AUDIO PLAN
- AUDIO CRAFT MAGAZINE
- AUDIO BASIC
- JAZZ CRITIQUE
- stereo
- FM fan
- RADIO TECHNOLOGY
- RG
- description
- A new-generation integrated upgrade that brings out the appeal of unique speakers as much as possible by raising the damping factor to 600 and bringing out the appeal of unique speakers as much as possible. The power amplification stage with 3 parallel push-pull power MOSFETs allows you to hear more powerful sound than before. There are no noticeable scratches on the exterior. Serial B0X159 (Fujisawa Yukishi) Maintenance information: 2024.4.20 Operation confirmed Accessories: remote control, instruction manual, power cord, original box Main specifications: rated output 180W+180W (8Ω) input RCA5 systems, XLR2 system, tape input/output 1 system, pre-out RCA1 system, XLR1 system main in RCA1 system, XLR1 system damping factor 600 size W465 ✕ H181 ✕ D428mm weight 24.6 kg
- description
- Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji) Maintenance information: 2024.3.30 continuity confirmed Accessories: none Main specifications: aluminum dead weight 12 g (actual measurement)
- description
- Spike receiver for large tall speakers with spikes Use it by sticking it into a small hole φ5.5 mm. Can also be used as a foot for an audio rack or speaker stand (Fujisawa Yukishi) Accessories: No accessories Main specifications: diameter φ50mm thickness 12.65mm
- description
- Maintained! Comes with stand (DK-8000). A model that has improved the network box of the Diaton 50th anniversary model DS-8000. I am overwhelmed by the clear, detailed treble from Pure Boron and the thick mid-low range compared to the 2S-305 broadcast monitor. Also, the quick start-up sound, which is unimaginable from its size, is excellent. There is a feeling of use in appearance, dullness, light scuffs, etc. (Kobayashi Hitoshi) Maintenance information: 2022.10.21 maintained (exterior stand network exterior cleaning/large scratch filler repair/line scratch simple touch up (repair marks remain) saran net stain/frame cleaning mid-edge softening treatment unit detachable one-sided tweeter disassembly and disconnection repair) Accessories: saran net Main specifications: 3 way, 3 speakers, bass reflex system, floor type, anti-magnetic type, 5 ohm 35 Hz to 40,000 Hz 93 db/w/m main unit W500 x H870 x D442 mm network box W370 x H130 x D287 mm weight body 58 kg, network 8 kg
- description
- MC cartridge using LC-OFC (linear crystal/oxygen-free copper) wire based on DL-103. Familiar sound with a wide range. The supple sound makes it comfortable to listen to. The exterior has a feeling of use, such as dullness on the body. Serial 4126 (Hiroki Aso) Maintenance information: 2024.4.21 sound output confirmed Accessories: none Main specifications: MC type output 0.25 mV, proper needle pressure 2.2 to 2.8 g, internal impedance 13 ohms, own weight 8.5 g
- description
- The disposal price has been reduced! Member prices are not applicable. 2024/2/28 sales price 248,000 yen Refreshed and maintained with internal and external maintenance! The clear and dynamic sound quality, and the deep, powerful sound of 123A is more powerful than its size, and makes you enjoy jazz and rock exhilarating. This speaker is perfect for playing jazz on records (Yonejima Satoshi) Maintenance information: 2024.2.28 Maintained (enclosure polishing/oil/wax coating, baffle painting. Maintenance: frame polishing/oil finish, net replacement. Woofer cone paper paint Tweeter maintenance: New urethane ring created, frame cone paper coating. Network maintenance: frequency characteristic check, ATT disassembly cleaning, terminal cleaning/screw replacement) Accessories: saran net Main specifications: 2 way 2 speaker bass reflex bookshelf type unit configuration high range LE25 (3.6 cm) + low range 123A (30 cm cone) impedance 8 ohms crossover frequency 2 kHz dimensions W360 x H600 x D 300 mm weight 20 kg
Manufacture:MACTONE
Price: JPY 107,273
- description
- The disposal price has been reduced! (Member prices are not applicable) 2024/4/8 sales price 198,000 yen Maintained! Macton tubular OTL stereo power amplifier. Eight 6RA3 triodes are used in parallel per channel to enhance load impedance adaptability, and it also features a structure with Macton's unique balanced NF applied. The sound unique to OTL is thick and has a high sense of energy, and the high driving power is also attractive. The appearance is oxidized and dull. Serial 40704 (Yonejima Satoshi) Maintenance information: 2024.4.8 Maintained (power transformer primary side rewound repair by PSE inspection. 3 vacuum tube 6RA3 replacements Vacuum tube 6AQ8 replacement. Main volume disassembly cleaning repair. Vacuum tube socket and RCA jack caulk repair. Operation has also been checked with AC 100V (rated output 32W, SP:16Ω), please use speakers above 16Ω) Accessories: No accessories Main specifications: tubular low-load OTL stereo power amplifier 30W x 30W (8Ω) vacuum tube used: 6RA3 x 10/6RA8 x 2/12AX7 W370 ✕ H160 ✕ D270 mm 12 kg
- description
- The disposal price has been reduced! (Member prices are not applicable) 2024/4/13 sales price 398,000 yen For the first time in about 7 years, CM10S2 has arrived! It lets you listen to high-response sounds. In addition to simplifying the crossover with Mundorf EVO capacitors, all important internal components have been improved, such as Vandenhall internal wiring, nickel-plated terminal trays, and the driver's anti-vibration dust plug. As for the exterior, there are scratches, threads, and deterioration in part of the urethane. Serial 1508-0011895, 1508-0011896 (Fujisawa Yukishi) Maintenance information: 2024.4.13 operation confirmed Accessories: instruction manual, saran net, spikes, rubber feet, jumper plates Main specifications: 3-way bass reflex type playback frequency band 28 Hz to 50 kHz output sound pressure level 90 dB nominal impedance 8 ohms W366 x H1087 x D414 mm weight 33.5 kg
Manufacture:HIFIMAN
Price: JPY 54,364
- description
- The price has been drastically reduced! 2024/4/17 sales price 69,800 yen ※It is cheap because it has a tobacco smell. Hi-Fi Man's planar drive headphones have a high resolution, and the low frequencies are clear and easy to listen to. The sound balance is flat and the high cushioning is also impressive. The exterior smells like tobacco and there are creases on the cable (Tamura Eiji) Maintenance information: 2024.4.16 Operation confirmed Accessories: original box, connection cable Main specifications: planar drive impedance 50 ohms sound pressure sensitivity 83.5 dB playback frequency band 8 Hz to 65 kHz 505 g
- description
- The disposal price has been reduced! Member prices are not applicable. 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI) Accessories: insulator T-PROP, screws Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
- description
- The price has been drastically reduced! 2024/4/12 sales price 79,800 yen ※It is cheap because it is in poor condition. Equipped with a coaxial unit, sound localization is good, the high frequencies are clear, and the sense of volume in the low frequencies is sufficient for the size, so you can relax and listen to classical music in small groups. It also has good efficiency, so it's easy to play, and it features a chic design with a shiny mirror piano paint. In addition to being scratched, some Saran magnets are missing. Also, there is a slight wobble in the SP terminal on the + side on one side, and one screw that stops the terminal board is missing. (FUJISAWA KOSHI) Maintenance information: 2024.4.9 operation confirmed Accessories: saran net Main specifications: 36Hz to 22kHz 45W 4Ω 93.5dB W207 × H990 × D274 mm 17 kg
- description
- The price has been reduced! 2024/4/21 sales price 39,800 yen This is a compact Dali speaker with an attractive sound that is warm and feels good against the skin. They play vocals, chamber music, etc. comfortably. The exterior is dull. Serial 5431394, 5431394 (Fujisawa Yukishi) Maintenance information: 2024.4.21 operation confirmed Accessories: original box, saran net Main specifications: Playback frequency characteristics approx. 45 Hz to 30 kHz crossover 2.5 kHz/14 kHz input sensitivity approx. 86 dB impedance 6 ohms recommended amplifier output 25 to 100 W W150 x H325 x D260 mm 4.8 kg
Manufacture:AIRPULSE
Price: JPY 58,909(pair)
- description
- The price has been reduced! 2024/4/20 sales price 69,800 yen This is the first arrival at the A100BT5.0 Hi-Fi Hall, the top model of the company's A80. The color is red high gloss with a luxurious high-gloss finish. The sound is very loud and has an extruding effect. There are plenty of input/output interfaces, and the wired USB is compatible with optical digital input, analog audio input, subwoofer output, and Bluetooth with aptX, a high-quality sound codec using the Qualcomm Bluetooth v5.0 chipset, making it easy to use. There are no noticeable scratches on the exterior. Serial 496000712560 (Fujisawa Yukishi) Maintenance information: 2024.4.20 Operation confirmed Accessories: remote control, power cord, connection cord Main specifications: DAC built-in active speaker output 40W x 2 input (digital) USB/Optical/Bluetooth (analog) RCA size W160 x H283 x D255 mm weight 5.5 kg
- description
- The disposal price has been reduced! (Member discounts are not applicable) 2024/3/25 sales price 118,000 yen LINN network player with built-in amplifier. It is equipped with an Ethernet terminal that completes the system simply by connecting a speaker, and supports WAV, FLAC, AIFF, Apple Lossless, AAC, and MP3 playback via LAN. In addition, it is equipped with 1 optical digital and 1 coaxial digital audio input and 1 RCA analog audio input. It can also be connected to devices other than the built-in player and used as a digital premain amplifier. *The volume will be adjusted on the computer. The exterior has a feeling of use such as dullness and small scratches. Serial 1298721 (Hiroki Aso) Maintenance information: 2024.3.25 Operation confirmed Accessories: power cable Main specifications: Compatible audio files: FLAC, ALAC, WAV, AIFF, AAC, MP3 compatible sampling frequency: 7.35k to 192k Compatible bits: 16 bit, 24 bit Input terminals: Ehernet Analog audio: RCA x 1 (impedance; 10 kΩ) Digital audio: RCA (SPDIF) x 1, TOSLINK (Optical) x 1 SP output: L/R x 1 (compatible with banana, bare wire, Y lug terminals) LINE Output: RCA x 1 SN Ratio: 105 dB Frequency Characteristics: 0 Hz - 30 kHz Output: 70W (4Ω) W191 x H80 x D274 mm Weight 2.65 kg
- description
- The disposal price has been reduced! Member discounts are not applicable. 2024/4/18 sales price 79,800 yen with MA15 woofer fixing bracket! An original product. A floor-type enclosure that uses a rear loading horn system. The interior has a folding horn structure with a total length of 2 meters, making it possible to reproduce powerful bass far exceeding its size. The exterior has chipped corners, scratches, repair marks, and paint peeling. Serial 11154 (Tomoho Asaine) Accessories: MA15 woofer grill net Main specifications: hole diameter 365 mm, screw pitch 420 mm backroad horn compatible speakers 2205, 2225, E140 minimum playback frequency 50 Hz main material particle board+Yonematsu laminated plywood (front baffle/road horn) W603 x H12 x D603 mm approx. 54 kg
- description
- The price has been reduced! 2024/3/15 sales price 79,800 yen 2023/11 maintenance completed! The middle class of the Sansui α series. The strength of the bass and the sharpness of the mid to high notes are mixed in a well-balanced manner, so you can enjoy not only jazz, but also various genres such as rock and pop music. The exterior is dull and the top plate is damaged. Serial 637065630 (Tomonori Asaine) Maintenance information: 2023.11.23 Maintained (disassembling and polishing grease applied to each switch (tone, turnover, loudness, muting, subsonic, power amplifier direct, MM/MC, reckout switch), each volume and switch clean output relay and headphone relay replacement main amplifier and power supply part solder repair, interior and exterior inspection, cleaning, side cover screw replacement operation confirmation when power is turned on It makes a popping sound, but it stabilizes in a few minutes) Accessories: copy of instruction manual Main specifications: effective output 160W+160W (6Ω) 130W+130W (8Ω) damping factor 100 (6Ω) W448 × H160 × D441 mm 20.3 kg
Manufacture:McIntosh
Price: JPY 386,364
- description
- The price has been reduced. 2024/4/2 sales price 448,000 yen This is a late C20 model that underwent full maintenance from the 2023/12 condenser to main VOL replacement. Among Mackin's control amplifiers, this is a popular gem with a particularly rich, glossy tone. Not only jazz, but also the vocal sounds are excellent. The unique, rich, and highly artistic tone shows a particularly good compatibility with vintage speakers. Exterior, front panel characters disappear a lot, dullness, small scratches, abrasions, etc., and there is a feeling of use (Kobayashi Hitoshi) Maintenance information: 2024.4.2 maintenance completed (1/2 W resistor replacement and 3 noise countermeasures replaced) 2023.12.19 maintenance (vacuum tube 6X4, block capacitor, electrolytic capacitor, film capacitor, oil capacitor, resistor, main volume replacement. Gang error correction resistance 1/2 W added, switching noise reduction resistance 1/4 W added. RCA jack and vacuum tube socket caulk repair, operation check.) Accessories: none Main specifications: tubular phono 2 system phono equalizer curve variable use vacuum tube ECC83 x 5 ECC82 x 2 EZ90 x 1 W440 x H165 x D316 mm 8.7 kg
- description
- The price has been reduced! 2024/4/20 sales price 39,800 yen maintenance completed item! It looks like a Class A amplifier, and an unmistakable sound pops out from the moment it starts up. Furthermore, it is an attractive car with a glossy high range and a mellow mid range, making the whole sound brighter. The exterior has small scratches and dullness over time. ※The side panel is missing. Serial 308241173 (Yamato Yuki) Maintenance information: 2023.11.13 maintained (main board solder repair PHONO earth terminal replacement speaker relay deterioration replacement RECOUT selector SW disassembly contact grease coating speaker switching SW disassembly contact cleaning idling adjustment sound output confirmation for each input/output connection) (Explanation of specifications) There is rattling in the volume knob, but it is not a malfunction due to structural rattling Accessories: copy of instruction manual Main specifications: output level 90W+90W, medium output, pure A class, high output, non-switching, class A operation, phono MM/MC switching, dimensions W470 x H167 x D400 mm, weight 12 kg
- description
- The disposal price has been reduced. Member discounts are not applicable. Current belt drive player model for the 2024/4/19 sales price 478,000 yen project. The company's commitment is packed with everything from the 9.5 kg aluminum alloy platter and selected ultra-low noise synchronous motors to neodymium magnetic floating feet. Equipped with Ortphone's popular dynamic balance arm RS-309D! (MURAKOSHI Yoichi) Maintenance information: 2024.4.17 sound output confirmed Accessories: instruction manual, stabilizer, power cord, head shell, mounting screws, template, needle pressure gauge, dust cover, EP adapter, gloves Main specifications: belt drive, compatible with 33, 45, 78 rotations, RS-309D: long arm needle pressure 0 to 5 g, cartridge weight 18 to 40 g (including shell), effective length 326 mm, effective length 311 mm, overhang 15 mm, height adjustment range 42 to 55 mm, W550 x H250 x 450 mm, 22 kg
Manufacture:McIntosh
Price: JPY 570,909 Sold Out
- description
- 2022/5/18 Maintenance completed. An original C22, a famous machine admired by enthusiasts. The thick, soft, and strongly extruded tone is a pleasant tone that can only be experienced with an old McKinn. It has a rich tone centered around the middle range with a high concentration, and it sounds with plenty of realism. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2022.5.18 maintenance (1/4 W resistor added, AC cord replacement/side lamp replacement, electrolytic capacitor 100 μF replacement, oil capacitor 0.01 μF replacement, electrolytic capacitor 40 μF replacement, block capacitor 40/20/1000 μF replacement, electrolytic capacitor 1000 μF addition, resistance 1W and 1/2 W replacement, vacuum tube socket and RCA jack caulk repair . Operation has been checked with AC 100 to 117 V.) Accessories: copy of instruction manual Main specifications: 117 V specification, 4 input systems, 2 phono systems, frequency characteristics, 20 Hz to 20 kHz (± 0.5 dB), signal-to-noise ratio, 85 dB (high level), 62.5 dB (low level), distortion ratio 0.2%, W406 x H138 x D330 mm, 7.3 kg
- description
- * Source Direct SW cover is missing and cannot be used, so it is cheap (it is off). Maintained by the manufacturer! 4th generation of the DENON 2000 series. It is an amplifier that can be enjoyed regardless of the genre of music, with its plump, loud mid and low frequencies, and a pleasant, sharp tone. Scratches, dullness, stains, and a feeling of use can be seen on the exterior and front edge (Kobayashi Hitoshi) Maintenance information: 2024.4.20 maintenance completed (select switch disassembly contact polishing grease applied, direct idling adjustment to the side where SD switch tone can be controlled (using repair auxiliary parts) operation tested) Accessories: copy of instruction manual Main specifications: High-rigidity 6-block, separated chassis, power amplifier, direct input, bi-wiring compatible, 80W+80W, W434 x H180 x D478 mm, 23.5 kg
- description
- Maintained! A pre-main amplifier that allows you to enjoy the glossy and thick sound typical of Sansui. What is noteworthy is the mid-low range, and the bass line, which clearly reveals the outline, is an appeal unique to the KX series during this period. The exterior is dull and has a feeling of use (Hiura Katsuji) Maintenance information: 2024.4.20 maintenance (output relay replacement, power amplifier circuit resistance replacement, power supply circuit capacitor replacement, tape selector, etc., switch disassembly, polishing grease application (input selector, power amplifier direct, source direct, reck-out, tone, loudness, muting switch), various volumes, switch cleaning, solder main part repair, pin jack polishing, interior and exterior inspection, cleaning, operation confirm) Accessories: copy of instruction manual Main specifications: 90W+90W (8Ω) phono mm/MC compatible dimensions W430 x H161 x D446 mm weight 18.0 kg
- description
- Set of 8 Audio-Technica iron blocks. There is more weight than it looks, and the sound seems to be tight when used under an amplifier or small speaker. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: original box Main specifications: W30 x H30 x D30 mm weight 136 g
- description
- A classic Technics headshell. Aluminum die-cast body with excellent vibration damping properties (Mizushima Itsuro) Maintenance information: 2024.4.22 continuity confirmed Accessories: none Main specifications: Weight 9.2 g
- description
- The die-cast aluminum shell has no screws, has a heavy weight, is sturdy, and the design is stylish and creative. Rigidity is high and low frequency tightness can be expected (Mizushima Itsuro) Maintenance information: 2024.4.22 continuity confirmed Accessories: none Main specifications: Die-cast aluminum, self-weight 10.6 g
- description
- Yamaha perforated lightweight shell. It is lightweight and strong due to aluminum press processing. The exterior and finger tips are straight, and a feeling of use such as dullness can be seen (Kobayashi Hitoshi) Maintenance information: 2024.4.19 Continuity confirmed Accessories: none Main specifications: aluminum stamping dead weight 9g
Manufacture:不明
Price: JPY 455 Sold Out
- description
- Unspecified set of 4 L-shaped Y rugs. There is a feeling of use due to appearance, dullness, abrasions, etc. (Kobayashi Hitoshi) Accessories: none
- description
- TOWER RECORDS turntable mat set of 3 Usually it comes in a set of 2. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi) Accessories: original bag
- description
- USB cable 1.2 m, aiming for a high level of sound quality, the cable structure has a 3-layer shield structure that thoroughly blocks noise and reduces signal loss, uses silver-plated α-OCC as the conductor, and a 24K gold-plated plug for the connector (Mizushima Itsuro) Maintenance information: 2024.4.22 continuity confirmed Accessories: none
- description
- A line selector that can be easily switched with an RCA connection. It can also be used for 4 input systems, 1 output system or 1 reverse input system, and 4 output systems, making it convenient to switch between multiple amplifiers and sources (Mizushima Itsuro) Maintenance information: 2024.4.22 continuity confirmed Accessories: instruction manual Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
Manufacture:AUDIO CRAFT
Price: JPY 3,636(pair)
- description
- Phono cable 0.5m RCA-RCA earth missing The sound quality is thick and powerful, typical of Audiocraft. It has unmistakably neutral properties. You can see the exterior, dullness, etc. and a feeling of use (Kobayashi Hitoshi) Maintenance Information: Continuity confirmed Accessories: none
- description
- The 1.5m power cable has a high attenuation rate of weak vibrations, and the sense of distortion is minimal due to the high rigidity, so the impression is that the sound quality is precise and accurate. Try it with a sound source with a large number of instruments, such as classical symphonies. In addition to the exterior and a lot of friction, you can also see a feeling of use such as dullness (Kobayashi Hitoshi) Maintenance information: 2024.4.19 Continuity confirmed Accessories: none Main specifications: blade beryllium copper (mirror polish) plating, thick silver plating (1.5 μm) + rhodium plating (0.3 μm) finish, chassis, high rigidity PBT (with 30% glass fiber), cover, high rigidity polycarbonate, completely non-magnetic, 125V/15A specification, PSE certified
- description
- Maintained! The 306 series was supported as a pure audio entry model. It has plenty of phono circuits, is MM/MC compatible, and impedance can be adjusted. Clear, high quality sound quality with W super servo system. I feel that the sound quality, which has a slight core, is good in this era. You can see a feeling of use such as appearance, dullness, small scratches, etc. (Kobayashi Hitoshi) Maintenance information: 2024.4.22 maintenance completed (mode, recout, input, subsonic, cartridge, phono selector switch disassembly, polishing grease application, replacement of all indicator lamps, solder repair, pin jack polishing, internal inspection and cleaning, each volume, switch cleaning, operation confirmation) Accessories: instruction manual Main specifications: PHONO (MM/MC) 2 system frequency characteristics 0.8 Hz to 170 kHz dimensions W480 x H100 x D403 mm weight 10.5 kg
- description
- Maintained! This is a 907 series higher class premain amplifier. Not only is the sound thick and wide range, but it is also a deep and majestic sound with a sense of weight. The XR series during this period has particularly horsepower in the mid to low range, and it sounds briskly ROCK and JAZZ. The exterior is dull and has a feeling of use (Hiura Katsuji) Maintenance information: 2024.4.20 maintenance (main amplifier circuit transistor, adjustment volume exchange, output relay, headphone relay replacement, power supply circuit transistor replacement, input selector, etc., and application of polishing grease (power amplifier direct, source direct, reck-out, tape, loudness, subsonic, muting, processor switch), various volume cleaning, soldering (Repair, DC, bias adjustment, internal inspection and cleaning, operation confirmation) Accessories: instruction manual Main specifications: Equipped with HYPERα-X balance circuit, effective output 190 w+190 w dimensions W466 x H163 x D452 mm, weight 33 kg
- description
- Maintained! The PRA-2000ZR is a control amplifier specializing in records, which has a reputation for phono circuits. The sharp sound quality of the MC is attractive. It is an MC2 system/MM1 system, and PHONO1 incorporates a pure focus MC transformer and PHONO2 incorporates a FET configuration head amplifier. The exterior has dullness and small scratches. Serial 6101100050 (Hiroki Aso) Maintenance information: 2024.4.22 maintained (equalizer board repair, transistor replacement, 24V regulator replacement, solder repair, each volume switch cleaning, internal inspection, cleaning, each input/output confirmation, operation inspection tone, there is a popping sound when SW is on and off, but there is no sound interruption, etc.) Accessories: copy of instruction manual Main specifications: PHONO3 system (PHONO1/MC PHONO2/MC PHONO3/mm) real-time tone control equalizer amplifier part dimensions W462 x H145 x D385 mm weight 10.6 kg
- description
- Maintained! A system equipped with DENON's highest-model phono motor DP-80 at the time and DA-401 tonearm mounted on a genuine cabinet DK-300. You can enjoy music slowly with stable operation by combining the DP-80, which incorporates plenty of advanced technology from the time, such as a dual-structure turntable and AC servo motors, and the DA-401, which prevents the needle from being violently touched by the influence of record boards by reducing weight. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 118435 (Hiroki Aso) Maintenance information: 2024.4.22 maintained (TR replacement normal/variable SW repair power capacitor replacement speed adjustment sound output test) Accessories: copy of the dedicated shell instruction manual Main specifications: DP-80 quartz lock direct drive outer rotor 3-phase AC servo motor, double structure, aluminum die-cast turntable, compatible with 33/45 rotations, DK300 dimensions W550 x H190 x D470 mm, DA401 static balance type, effective length 244 mm, needle pressure range 0 to 2 g, total weight approx. 24 kg
- description
- The 3rd generation model of the S10 series. Equipped with analog waveform reproduction technology AL24 Processing. The degree of perfection of the sound is extremely high, and in addition to the heavy mid-low range, the music is pleasantly enjoyable with colorful tones unique to Denon. There is a feeling of use on the exterior, such as dullness and small scratches. Serial 1021503089 (Hiroki Aso) Maintenance information: 2024.4.22 Maintained (current laser pickup level is within regulations; if it breaks down in the future, pickups cannot be obtained loading belt tray opening/closing SW replacement sound test) Accessories: instruction manual copy remote control power cable Main specifications: 24bit/96kHz alpha processor, HDCD decoder with DA converter function (coaxial/optical switching), W430 x H130 x D330 mm, 14 kg
- description
- *Currently sold items and remote controls are out of stock. A cassette deck using Victor's SA independent 3-head system. Equipped with an automatic tape select function, it is easy to use, and the digital meter is also impressive. There is a feeling of use on the exterior, such as dullness or bumps. Serial 08960021 (Hiroki Aso) Maintenance information: 2024.4.21 operation confirmed Accessories: none Main specifications: frequency characteristics metal 20 Hz to 19 kHz chrome 20 Hz to 19 kHz normal 20 Hz to 18 kHz dimensions W435 x H110 x D282 mm weight 4.5 kg
7N+8N Pure Copper Hybrid Twin Core Audio Cable/1.0m
This item has been sold.You can't purchase now.
24-42611-08507-00
- description
- ※There is a tear at the base of the plug, so it's cheap! XLR cable 1.0m pair 7N/8N high purity hybrid conductor construction. It is a model that pursues sound quality that is neither 7N nor 8N. The exterior is dull and has a feeling of use (Hiroki Aso) Maintenance information: 2024.4.22 continuity confirmed Accessories: none
- description
- Air-tight KT88 push-pull The modern sound, which combines the soft texture unique to vacuum tubes and the high resolution, is attractive. There are 2 inputs at the front and rear, and the front input can be directly connected to the first stage tube without going through a shielded wire. The front panel is equipped with a meter that can check the optimal operating point of the output tube. There are many scratches on the bottom plate, and there are paint chips, threads, and bumps on the transformer (Oikawa Tetsuji) Maintenance information: 2024.4.22 operation confirmed Main specifications: used vacuum tube KT88 x 4, ECC83 x 2, 5814A x 2, 12BH7A x 2, 12BH7A x 2, 80W+80W 8Ω, W415 x H223 x D380 mm, 32 kg
Manufacture:SOULNOTE
Price: JPY 5,455
- description
- SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto) Accessories: none Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
Manufacture:SOULNOTE
Price: JPY 5,455
- description
- SOULNOTE spike base. How about the fans? There is a feeling of use (Daiki Goto) Accessories: none Main specifications: diameter 35 mm height 7 mm weight 47 g (actual measurement)
- description
- A demagnetizer for blockbuster CDs that quickly spread the name of Acoliba. Simple operation by simply placing the CD on the tray and pressing a button. If the green light comes on and then fades out for a while, you're done. Please do it 1 to 2 times on the label side first, front to back. There is dullness (Daiki Goto) Maintenance information: 2024.4.22 continuity confirmed Accessories: power cable Main specifications: W160 x H58 x D195 mm weight 882 g
- description
- ※ It can be used without problems, but since future repairs are not possible, it is sold as is without warranty. 100V specification Reference power supply. This is a high quality AC generator that produces a clean, low distortion power supply. The 5 zones are isolated, and since mutual interference does not occur between each zone, the interference of each device can be completely shut out. By switching modes, you can check the voltage/distortion rate during input and voltage/distortion rate during output in real time. Stains and stains are conspicuous on the top plate. Serial 8L0159 (Fujisawa Yukishi) Maintenance information: 2024.4.22 operation confirmed Accessories: remote control, instruction manual (English characters), power cord, mounting hardware Main specifications: output 1500 VA output outlet, 5 zones, 10 ports, size W425 x H104 x D413 mm, weight 15.9 kg
- description
- Comes with original box A CD player limited to 250 units sold as a memorial model for the 10th anniversary of the establishment of SOULNOTE. Equipped with a dual TI stereo DAC “PCM1792A,” L/R are completely separated. This model achieves a delicate and majestic dynamic range by configuring a perfectly symmetrical balance circuit. The exterior is also good with no particularly large conspicuous scratches (Oikawa Tetsuji) Maintenance information: 2024.4.22 operation confirmed Accessories: remote control, instruction manual, power cable, spike, original box Main specifications: Dynamic range 96 dB total harmonic distortion ratio 0.0022% channel separation 98 dB digital filter 24 bit 8 times oversampling analog filter 3rd order passive type W430 x H109 x D393 mm (when spikes are attached) weight 9.0 kg
- description
- The price has been drastically reduced. 2024/4/18 sales price 118,000 yen This MC boost transformer is ideal for SPUs using the JS transformer TYPE0.32M No. 6600. The sharp high frequencies and the tenacious sound in the mid and low frequencies make the SPU sound even more energetic. There is rust on the exterior due to paint peeling (Murakoshi Yoichi) Maintenance information: 2024.4.18 sound output confirmed Accessories: none Main specifications: boost ratio 31 times with bypass function, primary impedance 1.5 ohm/secondary impedance 1.5 kΩ dimensions W90 x H68 x D88 mm weight 420 g
- description
- Maintained. An attractive pre-main amplifier with a thick sound that is a bit different from the current Lux. It is a high performance amplifier equipped with a Plus-X power supply with ample stabilization control and a phono straight function. It is a model that is compatible with MM/MC and is easy to use. There is a feeling of use on the cabinet, such as scratches and chipped veneers. Serial A2503701 (Mizushima Itsuro) Maintenance information: 2024.4.4 maintenance completed (disassemble all lever switches, polish contacts, apply contact cleaner, replace defective output relay contacts, replace power lamp, polish input/output pin jacks) Accessories: copy of instruction manual Main specifications: 80W+80W (8Ω) W464 x H156 x D332 mm 11 kg
- description
- Maintained! An improved version of the BC-1 standard monitor broadcast by the British BBC, a model that plays British sound in an attractive way. The brilliance and elegant expression of the classical sound source strings and vocal music are workmanship that can be said to be the prototype of the beautiful sound of European models. Serial 6429 6430 (Hiroki Aso) Maintenance information: 2024.4.2 Maintained (exterior repair/stain coloring Front Baffle Paint Rear Baffle Cleaning Saran Net Replacement/ Internal Urethane Replace/ Dowel Adjustment Woofer Single Side Edge Reinstall Center Adjustment Super Tweeter Cleaning Terminal Brand New Replacement Unit Detachable) Accessories: saran net Main specifications: 3-way bass reflex type 8Ω 50W W305 x H635 x D298 mm 14 kg
- description
- Maintained! Cartridge (SHURE M44G) included. A fully automatic player with high convenience. The ease of setting is also attractive, but after all, the repeat function and location mechanism that allows you to move to the desired position and perform without touching the tone arm are convenient, so you can easily enjoy analog. The exterior has small scratches, dullness, and a feeling of use (Hiura Katsuji) Maintenance information: 2020.9.7 maintenance completed (full arm disassembly, rewiring, arm bearing outer race cleaning, bearing ball replacement, oil lubrication, motor shaft oil lubrication, semi-fixed VR replacement for rotation adjustment, rotation adjustment implementation, needle pressure adjustment VR and operation SW disassembly, cleaning, auto sensor position adjustment, operation confirmation of each function, sound output check) Accessories: M44G Main specifications: fully automatic player, direct drive, 33/45 rotation, variable needle pressure range, 0 to 3 g, compatible cartridge, dead weight 3 to 12 g (including screws and nuts), dimensions W434 x H179 x D410 mm, weight 8.5 kg
- description
- This wood horn is compatible not only with FOSTEX drivers, but also with JBL 1-inch drivers (3-point stop). It is a horn characterized by a broad sound unique to wood horns, which is different from metal horns (Asaine Tomoho) Accessories: none Main specifications: cutoff frequency 420 Hz throat 2.54 cm birch wood parallel plywood W444 × H90 × D293 mm 3.1 kg (actual measurement)
Used
Consigned
Hold
ReservedSold Out-
-
- Company profile
- Privacy policy
- Contact
- Newsletter back issues
- Hi-Fi Do live camera!
- Today's software
- Today's hardware
- New arrival alert system
- Japanese
-
Hi-Fi Do Online Newsletter
-
Payment methods
-
Shipping methods
-
Warranty policy
-
Shopping procedure
-
Hi-Fi Do Record Shops Softs, Audio parts and Tubes can ship overseas.Ordinary,we use EMS but for large order,we use SAL or Surface.For Asia,it cost 1,200JPY/1LP,900JPY/1CD.Please check at the shipping cost table for more detail.
-
Meaning of icons
