The disposal price has been reduced. Member discounts are not applicable. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is a feeling of use on the exterior, paint peeling, etc. (Kobayashi Hitoshi)
Accessories: none
Only 1 bottle unopened! Unspecified XLR (male) to XLR (female) relay plug. The exterior is good (Kobayashi Hitoshi)
Maintenance information: unopened, unchecked
Accessories: none
The price has been reduced. 2024/2/26 sales price 1,200 yen. Unspecified set of 3 wood blocks A wooden block that feels like Yamamoto Sound Crafts's QB-4 is one size smaller. There is a feeling of use (Takasaki Atsushi)
Main specifications: size approx. W40 x D40 x H40 mm approx. 70 g (actual measurement)
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
The price has been drastically reduced. 2023.9.5 sales price 8,000 yen. Set of 8 unspecified JBL speaker mount parts MA15 type. There is some paint peeling on the exterior (Kobayashi Hitoshi)
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
Unspecified silver shell. There is a feeling of use due to appearance, dullness, abrasions, etc. (Asae Tomoho)
Maintenance information: 2024.4.18 continuity confirmed
Accessories: none
Main specifications: dead weight g (actual measurement)
The driver and how to use it are unknown. It's an item I bought with WE555 before, but I don't know if it fits 555. Please judge from the dimensions. Made of metal (Yasuhito Koshihama)
Main specifications: outer diameter 40mm inner diameter screw part approx. 35mm height 25mm upper outer diameter 24mm inner diameter 20mm
Power cable 1.5m 2P-3P specification PSE standard product 6ncu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a long-selling power cable with low noise, stable sound, and high C/P (Tamura Eiji)
Maintenance information: 2024.4.30 continuity confirmed
Accessories: case
The price has been reduced! 2024/5/11 sales price 6,500 yen RCA cable 1.0 m pair 6N+5N hybrid 2-core (twin) W shield. It consists of 4 types of high purity (PC-OCC+ pure silver coated OFC). The range is wide and the sound quality is well-balanced. In addition to being dull on the exterior, there is a feeling of use, such as having a habit (Hiroki Aso)
Maintenance information: 2024.5.11 continuity confirmed
Accessories: none
Power cable, 0.4 m, no terminals, 6nCu+OFC new hybrid 2-core conductor Although it is the company's entry model, it is a power cable with low noise, stable sound, and high C/P (Kanai Hidetsugu)
Maintenance information: 2023.12.9 Continuity confirmed
Accessories: none
The 1.19m pair end of the speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCu. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor that is a hybrid of 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end of the 1.35 m end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
Only 1 speaker cable uses a new conductor by hybridizing 4 types of materials, including the innovative HiFC and PCUHD wire materials, with an exquisite golden ratio, centering on an untreated ultra-high purity 6NCU at the end. It's a clear high range, a plump middle range, and a heavy low range. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.5 continuity confirmed
Accessories: none
*Currently sold. A small Yamaha speaker with a piano finish. Rich bass reproduction is achieved by deepening the depth while being small. Deep low frequencies are added to the sharp, stretchy mid-high range unique to Yamaha, so you can enjoy sound that's more than the price. There are scuffs and dents on the exterior (Hiura Katsuji)
Maintenance information: 2024.5.14 sound output confirmed
Accessories: saran net
Main specifications: output sound pressure level 85dB impedance 6Ω allowable input 40W playback frequency band 55Hz to 80kHz W154 x H274 x D287 mm weight 3.9 kg
Over 300 deteriorated parts, including 133 transistors and 65 capacitors, have been replaced and maintained! Shell (AT-LH15/OCC) with cartridge (AT-F3/2). A supreme record player made by combining the best of Yamaha's engineering. In addition to adopting a linear tracking system, what is surprising is the amount of material that was put in without hesitation. The total weight of the main body alone is 27 kg, and the turntable made of super duralumin cut from solid wood weighs 5.6 kg. The well-structured low range and the delicate, clean sound that spans the entire range are remarkable. The smooth operation feeling of auto play and multifunctionality such as pitch control are also attractive. There are small scratches and dullness, but it is a beautiful category even when viewed from the model year (Oikawa Tetsuji)
Maintenance information: 2024.5.14 Maintained (replacement of deteriorated parts, re-soldering of each board, board cleaning, volume disassembly cleaning, circuit adjustment of each part, operation check, sound test)
Accessories: power supply unit, screw, shell (AT-LH15/OCC), cartridge (AT-F3/2)
Main specifications: Direct drive system motor 20 pole 15 winding slotless DC motor tone arm/dynamic balance linear tracking arm mounting cartridge dead weight range 4 to 13 g rated power consumption 27 W body/W480 x H154 x D416 mm 27 kg power supply/W124 x H90 x D385 mm 5 kg
※Since it is cheap, it is currently sold. This is a thin center speaker. Since it has an anti-magnetic design, this model is easy to use and easy to combine with other speakers. Recommended for those who are building surround sound for the first time. You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.1 sound output confirmed
Accessories: instruction manual, connection cord, original box
Main specifications: 2 way, 3 speakers, bass reflex system, center type, anti-magnetic design, playback frequency band 60 Hz to 20 kHz, 88 dB, 6 ohms, allowable input, 40 W, W435 x H100 x D221 mm, 2.2 kg
Speaker with active servo technology A powered speaker with a built-in power amplifier in the woofer (only the woofer part requires a power source to drive). The medium and high frequencies, which are typical of Yamaha, remain the same, and the low frequencies also come out well. It has a good balance and can be used regardless of genre (Daiki Goto)
Maintenance information: 2024.5.9 operation confirmed
Accessories: instruction manual
Main specifications: 4 way, 3 speakers, bookshelf type, W340 x H700 x D337 mm, 30 kg/1
The disposal price has been reduced! (Member discounts are not applicable) 2024/3/10 sales price 69,800 yen Maintained! A stereo premain amplifier developed by inheriting CA-1000 technology. It is an amplifier that can evaluate pure sound quality without habit. The straight tone and glossy high frequencies give an impression. Even though it's an old model, it doesn't feel that the range is narrow, and it goes perfectly with rock, jazz, drums, and wind music. The exterior is dull, scratched, etc. (Tamai Jun)
Maintenance information: 2024.3.10 Maintained (speaker terminal replacement, power cord replacement, power supply circuit, tone control circuit, main amplifier circuit, etc., deterioration resistance and transistor exchange switch and volume contacts disassembly polishing input/output pin jack polishing*The circuit is not stable immediately after turning on the power supply, so when the filter or tone switch is switched, it makes a crackling sound. (If you wait a little while, it won't bother you)
Accessories: none
Main specifications: output 45W+45W (8Ω, Class B operation) 10W+10W (8Ω, Class A operation) 20Hz-20kHz power consumption rating 190W maximum 300W external dimensions 436 x H144 x D323 mm weight 13.5 kg
Disposal prices have been reduced. Member discounts will not be applied. 2023/1/23 sales price 500 yen. Sale as is. 1 YAMAHA full range unit. There is a dent in the center cap, and there is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.1.23 Operation confirmed
Accessories: none
Main specifications: Outer diameter approx. 205 mm, screw pitch approx. 105 mm, weight 1.5 kg
Internally and externally maintained! It is a monitor speaker that Japan is proud of, and was also used by Swedish national broadcasting and Finnish national broadcasting. The exterior has been finely polished to a beautiful finish. The mid-high range quality is high, and the sound of the piano sounds vividly. It is a powerful machine that can handle all genres with a sense of power even in the low frequencies. There is a very slight dent in the tweeter grill, and there are repair marks on the side (Murakoshi Yoichi)
Maintenance information: 2024.3.4 maintained (exterior repair/polishing/full coating, unit frame painting, woofer cone paper coating, network frequency characteristic check, ATT cleaning, terminal replacement)
Accessories: none
Main specifications: 3 way, 3 speakers, sealed system, bookshelf type, 30 cm cone type for low range/8.8 cm dome type for medium range/3.0 cm dome type playback frequency band for high frequencies 39 Hz to 20,000 Hz crossover frequency 500 Hz/6,000 Hz impedance 6 ohms output sound pressure level 90 dB dimensions W427 x H695 x D335 mm weight 31 kg/bottle
Genuine YAMAHA, genuine replacement needle for CG-8100 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
The disposal price has been reduced. Member prices are not applicable. 2023/9/11 sale price 10,000 yen rare item! It appears to be a promotional product of YST-SW1000L. The YST-SW1000L can be displayed in a cool way (Oikawa Tetsuji)
Accessories: none
Main specifications: W660 x H20 x D600 mm weight 4.2 kg (actual measurement)
YAMAHA's heavyweight premain amplifier. The low frequency with good damping by a good power transformer and the clear sound typical of YAMAHA are attractive. The PHONO input is equipped with MC, making it a great specification for analog fans. The pre-main part can be separated, and there is potential for development into a separate part. There are a lot of front panel stains on the exterior. There is deterioration on the back side of the wood panel (Sasaki Shota)
Maintenance information: 2024.5.11 Maintained (right amplifier power circuit fault repair. Soldering correction in each circuit, including the left and right main amplifiers. Disassemble the switch and polish the contacts and apply contact cleaner. Bad output relay contact replacement. Knob installation correction. (I/O pin jack polish)
Accessories: copy of the manual
Main specifications: 130W+130W (8Ω) 150W+150W (6Ω) PHONO (MM/MC) pre-main separable W473 x H169 x D464 mm 26 kg
Genuine replacement needle for YAMAHA CG-6900 Operation has not been checked (Murakoshi Yoichi)
Maintenance information: operation unconfirmed
Accessories: original box
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
※There is no problem with operation, but it is currently sold because it is cheap. A subwoofer that can also be installed in a home theater or for those with insufficient bass in the system. The settings are simple, and you can create sound according to the speaker and room conditions. There are scratches, dirt, dullness, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.3 operation confirmed
Accessories: none
Main specifications: 1 way, 1 speaker, advanced YST system, floor type, anti-magnetic high-cut filter, 50-150 Hz, continuously variable dimensions, W235 x H485 x D409 mm, weight 14 kg
※1 bottle only. By adopting a diaphragm with a weight of 0.03 g or less and a magnetic circuit with a strong magnet that makes use of the characteristics of the 1000m tweeter berylum material, we have achieved smooth frequency characteristics and excellent start-up even at the high end. The sharp, realistic sound quality is a fresh and transparent sound. The exterior has a feeling of use such as dullness and scratches (Jun Tamai)
Maintenance information: 2024.5.10 sound output confirmed
Accessories: none
Main specifications: size W115 x H45 x D115 mm 0.9 kg (actual measurement)
A horn type tweeter that is an improved model of the JA-0506. Alnico magnets are used for the magnetic circuit, and hollow-out aluminum is used for the horn part. A hard duralumin V-shaped ring diaphragm is used for the diaphragm. The sound is bright and clear (Daiki Goto)
Maintenance information: 2024.5.13 (operation confirmed)
Accessories: original box
Main specifications: horn type tweeter unit Alnico magnet 0.23 kg impedance 8 ohms playback frequency band 3 kHz to 20 kHz recommended usage band 5 kHz or more rated input 1 W maximum input 2 W sound pressure level 109 dB
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
There is no problem with the operation, but it will be handed over as is. Yamaha subwoofer. You can easily enjoy powerful sound. The high-cut filter allows you to listen in the desired range, so the range of uses also expands. The exterior has a slightly raised part on the top plate, and there is a scratch on the back corner (Mizusaki Ryo)
Maintenance information: 2024.5.9 sound output confirmed
Accessories: none
Main specifications: A-YST method anti-magnetic amplifier output 250W playback frequency band 20Hz to 160Hz high-cut filter frequency 40Hz to 140Hz continuously variable W340 x H432 x D370 mm 17 kg
An enclosure for Yamaha's SR speaker and S1520S incorporating the YST system. The opening for the 38cm woofer+horn is empty. The speaker terminal is 1 Speakon terminal. There is a feeling of commercial use (Murakoshi Yoichi)
Accessories: none
Main specifications: bass reflex floor type W540 x H780 x D438 mm 25 kg (actual measurement)
The dirt, tobacco smell, and feeling of use are conspicuous, so it is currently sold. An HX series higher-level machine that effectively controls space. It's a speaker for home theaters, but the sharp sound is attractive (Daiki Goto)
Maintenance information: 2024.5.7 operation confirmed
Accessories: none
Main specifications: 3-way bass reflex type (anti-magnetic) 20cm cone woofer x 2, 13cm cone midrange, 3cm dome tweeter 6Ω 364 x 1102 x 397 mm 32.5 kg
A Yamaha mid-size speaker bracket that can be mounted on a wall or ceiling. It can be used for small speakers such as the NS-10MT and surround speakers. The exterior has dark spots and small scratches (Hitoshi Kobayashi)
Accessories: none
Main specifications: W155 x H190 x D80 mm 0.85 kg
The price has been drastically reduced! 2023/5/9 sales price 69,800 yen Maintained! It's a simple and easy to use preamp. Compared to the C-2, it has a clearer impression and allows you to listen to acoustic sources such as vocals and violin with a smooth sound. PHONO is also fully compatible with MM and MC. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Maintenance information: 2024.5.9 Maintained (replacement of faulty capacitors in the power supply circuit, replacement of power lamps. Solder correction on all circuit boards. (Disassemble switches, polish contacts and apply contact cleaner)
Accessories: none
Main specifications: PHONO2 system (MM/MC) LINE 2 system TAPE2 system size W435 x H96 x D369 mm weight 7.5 kg
Internal and external maintenance has been applied and brushed up. The vivid sense of dynamism and the sharpness of the high frequencies typical of YAMAHA have been revived. It has a low frequency thickness that 1000 monitors don't have. It is a timeless masterpiece with a clear sense of transparency, upper and lower driving force, and the smooth connection, and the heavy exterior with an ebony finish that stands out at a glance even today. It is in good condition due to maintenance. Serial 11478L 11478R (Yamato Yuki)
Maintenance information: 2024.4.1 operation confirmed
2023.9.4 Maintained (exterior repair/polishing/clear finish. Rear baffle repair/painting. Saran net replacement. Unit frame painting. Network maintenance (Since the terminals have already been replaced with external products, adjust the direction and tighten, apply a screw fastener, and replace the mounting screws. ATT contact status check (check that there are no gaps). A frequency characteristic measurement check (~ 42 kHz) was performed, and the original capacitor was continuously used because the results were good. Input/output waveform and balance check, sound output check) Unit detachable)
Accessories: saran net
Main specifications: 3-way sealed playback frequency band 40Hz to 20kH sound pressure level 90dB rated input 50W maximum allowable input 100W impedance 8Ω crossover frequency 500Hz/6kHz dimensions W395 x H710 x D349 mm 39 kg