The disposal price has been reduced. Member discounts are not applicable. 2022/5/23 sales price 300 yen. *Only one speaker cable uses oxygen-free copper (OFC) as the untreated conductor at the 0.5m end. The sound quality has a relatively flat impression, so you can easily feel the sound quality a notch higher (Kanai Hidetsugu)
Maintenance information: 2022.5.22 continuity confirmed
Accessories: none
※Only 1 interconnect cable is a 0.4 m three-core line cable with no terminals. There are exterior, feeling of use, small scratches, scuffs on the sheath, etc. (Murakoshi Yoichi)
Maintenance information: 2023.12.9 continuity confirmed
Accessories: none
※Only 1 speaker cable, 0.9 m, has an orthodox cab tire structure, and reproduces sound quality that is thicker than the price. There is a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2023.5.22 continuity confirmed
Accessories: none
unopened! Neutrik speakon 2-core connector that can also be connected to a 4-core receptacle (Murakoshi Yoichi)
Maintenance Information: Unopened
Accessories: none
Speaker cable A standard cable that has become synonymous with 1.0 m pair of unprocessed speaker cables. It features a stranded wire structure that enables reliable transmission with low noise even in harsh environments such as studios. Monitor-like sound quality with little coloring (Kanai Hidetsugu)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Speaker cable with soldered 0.9 m pair ends It is a solid sound that clearly shows the backbone of an LC-OFC conductor sound. The exterior has a feeling of use such as rubbing and dirt on the sheath (Murakoshi Yoichi)
Maintenance information: 2024.4.11 continuity confirmed
Accessories: none
This is a set of needle tip cleaning solution and brush. Normally, you can use a dry method with only a brush, and a wet method that uses liquid when the dirt is severe (Hiroki Aso)
Accessories: brush case
National power plug The exterior, dullness, and feeling of use of the PSE certified medical ground 15A cap can be seen (Kobayashi Hitoshi)
Accessories: none
Carbon fiber cleaner ideal for cleaning analog discs. The carbon fiber brush removes dust and static electricity left on the surface of the analog disc. The exterior is dull and has a feeling of use (Tomoho Asaine)
Accessories: none
IEEE1394A cable 4 pin/6 pin terminal 1.0m audio-technica GATE LINK series iLINK cable Uses PCOCC+OFC hybrid conductors that the company is proud of (Murakoshi Yoichi)
Maintenance information: unconfirmed
Accessories: none
A pair of 2 corian boards with unknown details seems to be just the right size for small speakers, etc. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: W180 x H7 x D270 mm 0.6 kg (actual measurement)
The price has been reduced! 2024/4/7 sales price 1,500 yen A high-precision level instrument that is essential for leveling players. It is a long-selling model with an aluminum body (Tomonori Asae)
Accessories: none
PSE standard product UL compliant FURUTECH inlet plug is a non-magnetic material design using gold-plated copper screws and stainless steel parts (Kobayashi Hitoshi)
Accessories: none
Speaker cable 2.0m pair A standard BELDEN speaker cable nicknamed “sea snake” with untreated terminals. The cable braided in orange and black is impressive, and it features a tight sound. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.4.13 continuity confirmed
Accessories: none
Set of 4 spike bases A spike bass for audio created with an emphasis on strength and non-resonance. High-strength 2000 series alloy (non-magnesium) is used. Sound strength, sense of positioning, etc. can be improved. There is oxidation on the exterior (Tamura Eiji)
Accessories: none
The exterior of the woofer mounting clamp, which seems to be a self-made set of 5, has variations in the cutting part, there are corrosion and mounting marks all over, and there is a feeling of use such as dullness, abrasions, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: Mounting part, claw depth approx. 12 mm, 27 x 24 x 18 mm
Set of 4 spike bases A spike bass for audio created with an emphasis on strength and non-resonance. High-strength 2000 series alloy (non-magnesium) is used. Sound strength, sense of positioning, etc. can be improved. There is oxidation on the exterior (Tamura Eiji)
Accessories: none
3P power plug 125V/15A specification. The thickness from the low to medium range is natural, and the unplated brass sound has no habit compared to other plated plugs, so you can use it with peace of mind. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Unspecified marble board. The top plate and 5 sides have a mirror finish. Use it for amplifiers, CD players, etc. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
Main specifications: W300 x H30 x D450 mm 10.6 kg (actual measurement)
with logo! This headshell is popular due to its combination with the Technics and SL-1200 series. It is made of aluminum die-cast with high rigidity, and brings out the characteristics of the cartridge (Hiroki Aso)
Maintenance information: 2024.4.17 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Fidelity-Research headshell Lightweight and highly rigid. It is characterized by an enveloping shape with a thick aluminum press-processed body. There are dullness and small scratches on the exterior (Tamai Jun)
Maintenance information: 2024.4.19 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 10g
The core model of the high-grade power plug “PC Series”. All PSE standard parts are completely non-magnetic. Due to the characteristics of silver+rhodium plating, it has high resolution, high response, and wide range characteristics. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: none
PSE standard product ACROLINK power plug Model number unknown The exterior, dullness, and feeling of use can be seen (Kobayashi Hitoshi)
Accessories: none
Audio-Technica's lightweight hard shell. It is compatible with cartridges that are sharp and sharp. The connection between the fuselage part and the arm is made of separate parts, making it difficult for extra signals to be transmitted. (TAMURA Eiji)
Maintenance information: 2024.3.30 continuity confirmed
Accessories: none
Main specifications: aluminum dead weight 12 g (actual measurement)
This is a rhodium-plated model of the long-selling FI-11 series L-type plug FI-12L series. Adopts a new plating method and a newly developed cable clamp to control stable grip and resonance. Improved sound quality and improved durability have been achieved (Kobayashi Hitoshi)
Accessories: none
Main specifications: L type power plug cable, suitable diameter 9.5 mm to 17.0 mm, dimensions: 42.2 x 55.0 x 66.4 mm
※Inexpensive because it is in poor condition. Self-made 2way/3way enclosure. The size of the hole is different at the top, with an opening diameter of about 315 mm on the top and about 360 mm on the bottom. There are many peeling veneer, corner pads, scratches, etc. (Oikawa Tetsuji)
Accessories: none
Main specifications: W450 x H1056 x D480 mm approx. 33 kg
A dedicated insulator developed for the company's CD player Njoe Tjoeb. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Accessories: instruction manual
Main specifications: 50 mm in diameter, 25 mm in height (actual measurement)
RCA output terminal cap Due to its completely non-magnetic structure, when inserted into the RCA output terminal, it exhibits a high damping effect, and further improves sound image localization and signal-to-noise ratio. (FUJISAWA KOSHI)
Accessories: quartz resonator QR-8
Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. There is dullness etc. throughout the exterior (Hiroki Aso)
Accessories: none
Main specifications: W70×D70×H35mm
Made from Hokkaido Asada cherry wood and African ebony. It doesn't tighten too much as a metal insulator, and it makes the most of the sound of the music. There is dullness etc. throughout the exterior (Hiroki Aso)
Accessories: none
Main specifications: W70×D70×H35mm
*The display is dark, so it is cheap and is sold as is. This is an FM/AM digital synthesizer tuner. The frequency can be adjusted in detail, and timer reservation recording is also possible. The exterior is dull (Oikawa Tetsuji)
Maintenance information: 2024.4.3 operation confirmed
Accessories: remote control, instruction manual, AM antenna
Main specifications: W440 × H96 × D307 mm 3.8 kg
The 1.3 m power cable uses a polymer polyolefin material for the untreated terminal sheath. The thickness, which can be called overspec, ensures high speed and large current capacity. You can see the exterior, dullness, scuff marks, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.19 Continuity confirmed (PSE certified product)
Accessories: none
PSE standard product 4-prong power strip The sound is lively and the music is dynamic. The spread of sound increases, and an image of the sound spreading throughout the room and the body being wrapped in sound comes out. There is a feeling of use on the exterior, such as dullness and small scratches (Hiroki Aso)
Maintenance information: 2024.4.23 continuity confirmed
Accessories: none
Main specifications: cable part 75 cm, total length approx. 90 cm
RCA cable, 1.0 m pair, 6N-7N hybrid conductor, twin core structure, thick and strong mid-range, this hidden name cable is recommended for vintage audio. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
Quadra 180mm pole set of 4 The neck is curved rather than straight. There is oxidation on the exterior (Tamura Eiji)
Accessories: head part of the head
Real sound processor for home theaters Just by connecting to a home theater speaker, the sound image and localization become clear, the live feeling increases, and the surround effect is enhanced. There are tape marks on the exterior. Serial 001288 (Tamura Eiji)
Maintenance information: 2024.4.24 Operation confirmed
Accessories: none
Main specifications: Compatible impedance of 4 ohms to 6 ohms is desirable, maximum output of 1 kW or less is desirable, W113 x H41 x D56 mm, mass approx. 170 g
*Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low range blurring clear, and accurate sound images can be obtained. There is a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: original box spike base
Main specifications: Gradation cast iron, matte black finish, diameter 60 x height 45 mm, weight 800 g/piece, plate diameter 35 x height 5 mm
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
The 1.8 m PSE standard MK2 power cable is not only flexible and easy to use, but the sound quality has also been brushed up with fewer habits. You can get clear, sharp sound. There is a frayed sheath (Tamura Eiji)
Maintenance information: 2024.4.24 continuity confirmed
Accessories: none
Pair tube military high reliability tube 6V6GT equivalent tube black base smoke measurement value 84/84 (rejected value 46), all but the printing on the top of the tube with white box has disappeared, but it was determined that it was CV511 based on the structure ※The pair was determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Y lug plug set of 4 have mirror-polished terminal contact parts made of leadless brass material with excellent conductivity, and rhodium plating treatment has been applied to the surface to further improve conductivity and durability (Tamura Eiji)
Accessories: original box, instruction manual
A mid-size Shure model equipped with a solid diamond needle. The resolution is high, and the cuts and crisp sound with a sense of energy in the high frequencies are attractive. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.4.23 sound output checked
Accessories: none
Main specifications: mm cartridge output 4.0 mV needle pressure 0.75 to 1.5 g frequency characteristics 20 to 20,000 Hz dead weight approx. 6.5 g
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms (Sasaki Shota)
Accessories: none
Main specifications: aluminum stamping dead weight 8g