* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.7 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 1.0 m pair, LC-OFC class 1 conductor, has been produced for over 10 years, and is a long-selling product balance capable of pure signal transmission. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
JBL's 38cm cone type full range unit. Unlike modern heavy bass, it can reproduce bright and light low frequencies. It is a unit that can do a variety of sound makeup depending on the driver or tweeter that is sharp and adapts well. There are small scratches and dirt on the exterior, and there is a small crack in the cone on one side (Ryo Mizusaki)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: none
Main specifications: 38cm cone type full range unit Alnico 6.6/6.3 Ω (actual measurement) 103 dB recommended enclosure internal volume 114 to 338 L frequency characteristics 50 to 6,000 Hz screw pitch (diagonal) 370 mm 7 kg
* Since it has been replaced with an external plug, it is inexpensive. RCA cable, 0.5 m pair, LC-OFC class 1 conductor, long-selling product balance that can transmit pure signals has been produced for over 10 years. It is a cable with flat, tight bass and a smooth high-frequency luster. It rubs against the sheath and is dirty (Kojima Yosuke)
Accessories: none
RCA cable 0.75m pair, a hybrid configuration of copper, aluminum, and brass, which is also a characteristic of the company, has a high resolution and an exciting sound that comes off quickly. It rubs against the sheath and is dull on the plug (Kojima Yosuke)
Accessories: none
Comes with original box! Marantz's first DSD-compatible USB-DAC/headphone amplifier. In the USB DAC section, a digital isolation system is installed on the front part of the DAC to eliminate adverse effects such as high-frequency noise flowing in from a PC connected to USB, so you can listen to sound with high freshness. Serial AEN2718090172 (Tomonori Asaine)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control instruction manual, power cord, connection cord, original box
Main specifications: PCM192 kHz/24 bit, DSD is 5.6 MHz DSD native playback with ASIO 2.1, DoP, WASAPI compatible file format MP3/WMA/AAC/WAV compatible W250 x H90 x D270 mm 5 kg
Maintained by the manufacturer! *The FR-54 lifter is broken, and the inside force canceller weights are out of stock, but parts cannot be obtained, so this part is the current situation. A record player with FR's FR-54 mounted on DENON's DP-3000! The cabinet is a DK-100F, a turntable with precise rotation and a smooth tone, and an arm with a simple form without unnecessary decorations and a stable stability arm, and a very practical system. There is a feeling of wear on the exterior, such as scratches and dullness. Serial 450206 (Asaine Tomoho)
Maintenance information: 2024.5.3 Motor part maintained (transistor replacement. (Arm parts that are missing will be sold as they are currently because parts cannot be obtained, check the sound output)
Accessories: copy of instruction manual
Main specifications: DP-3000 servo type direct drive speed 33 1/3, 45 rpm FR54 static balance type short arm effective length 245 mm needle pressure range 0 to 3 g compatible cartridge weight 3 to 20 g overall part W530 ✕ H180 ✕ D435 mm
Speaker cable is an extra thick cable using 12 pairs of 18-gauge oxygen-free high-conductivity copper with 2.9 m pairs of untreated straight wires. There is dirt and stickiness on the sheath (Kojima Yosuke)
Accessories: none
※It's cheap because it's in poor condition! This is an Audionics RCA male-to-female conversion cable that was an orthophone distributor until the 1970s. There is a feeling of use on the exterior, such as rubbing and deposits on the sheath, and dullness on the plug. (ASAINE Tomonori)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
※It smells like tobacco, so it's cheap! Rare cables are in stock, and this is a mastering grade cable developed and used in a mastering studio called XLR Sidera Mastering, a 2.0m digital cable terminal. The sound without coloring is characteristic, and you can definitely use it where you don't want the sound quality to change depending on the cable. There is a feeling of use such as dullness and tobacco smell (Jun Tamai)
Maintenance information: 2024.5.2 continuity confirmed
Accessories: none
※It's cheap because it's in poor condition! The speaker cable is connected to a 3.0 m pair in parallel. Terminal repair is required. This is an early model of MIT without a terminator. The exterior has a feeling of use over time, such as scratches, yellowing stains, terminal deformation, damage, etc. (Asaine Tomoho)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
※It's cheap because it's in poor condition! Speaker cable, 3.0 m pair, terminal Y lug This is an early model of MIT without a terminator. The exterior has a feeling of use over time, such as scratches, yellowing stains, terminal deformation, damage, etc. (Asaine Tomoho)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Stereo mini-XLR male cable 0.7 m conversion cable for line connection from portable players, etc. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Balanced stereo mini (4.4 mm, 5 pole male) - XLR male cable, 1.0 m pair, reliable and proven Negrex commercial cable. The sound quality is clear and straightforward. The exterior is dull (Tomonori Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: No accessories
Outlet plate with Super Cryo treatment. It is a high-grade cryo-treated outlet plate that provides high resolution and freshness (Asaine Tomoho)
Accessories: none
Main specifications: 70 x 115 mm approx. 33 g
Speaker cable 0.5m pair terminal banana details are unknown. There is a feeling of use on the exterior (Tomoho Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
Speaker cable 0.5m pair terminal banana details are unknown. There is a feeling of use on the exterior (Tomoho Asaine)
Maintenance information: 2024.5.3 continuity confirmed
Accessories: none
HDMI cable, 3.0 m, is an affordable HDMI cable with a wired cord from Amazon Basic. Details will be unknown (Tomoho Asaine)
Maintenance information: 2024.5.3 unchecked
Accessories: none
This is a high-resolution D/A converter. Dual monaural configuration, compatible with DSD 5.6 MHz and PCM192 kHz/32 bit USB inputs. You can easily enjoy the world of high-resolution audio from high-resolution sound source playback software installed on your computer. The output is equipped with an XLR balanced output in addition to the RCA output. Furthermore, these audio output levels can be selected from fixed, variable, and output off (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed (playback confirmed up to PCM192 kHz/DSD 5.6 MHz, COAX/OPT playback OK, each output playback confirmed)
Accessories: power cable
Main specifications: PCM data sampling frequency 32K, 44.1K, 48K, 88.2K, 96K, 176.4K, 192 kHz W215 × H61 × D238 mm 2.0 kg
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
Speaker cable is an abnormally thin cable with 3.0 m pair ends for an unprocessed speaker cable. A cable boasting high resolution and a high amount of information. The sound quality changes drastically depending on how you use it, such as separating the main amplifier and speaker, and shortening the speaker cable, etc., so it's fun to drive the sound quality to your liking (Kojima Yosuke)
Accessories: none
A very simple CD/SACD player. The sound with fast response and low center of gravity is attractive. You can fully enjoy SACD-like spatial expression and highly transparent sound at a low price. There is a small scratch on the top plate (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, power cable, instruction manual
Main specifications: playable media/SACD, music CD, CD-R & CD-RW (music format, MP3, WMA) W420 x H113 x D340 mm 11.0 kg
Among Sony CD players, this model is sharp and has a sense of energy. The sharp sound is fully compatible not only with jazz and rock, but also with modern typed sound sources. There are dullness and scratches on the main body, and discoloration can be seen on the stabilizer*The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: copy of instruction manual
Main specifications: 1-bit current pulse DAC, fixed optical system, zinc die-cast pickup base with 4 types of variable digital filters, frequency characteristics 2 Hz to 20,000 Hz, W430 x H125 x D375 mm, 15.2 kg
Maintained. A diatone preamp with a thick mid-range sound. The sense of extrusion in the low frequencies is also good, and the overall sound is energetic. Also, it is a unit with a full range of functions as a preamplifier, such as input gain adjustment and left and right independent tone control. The exterior has many scratches and dullness overall (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel lever switch and other switch disassembly contacts are polished and contact cleaner applied. Volume contact correction. Power cord replacement)
Accessories: none
Main specifications: 2 mono construction system, special attenuator volume adopted, equipped with 2 PHONO inputs, 2 line inputs, W425 x H169 x D204 mm, 5.8 kg
Maintained, including replacing glass panels with new ones! A pre-main amplifier with a built-in McIntosh traditional output transformer. You can enjoy the rich and rich sound world typical of Macintosh. This is one that combines the appeal of the sounds of modern and old McKinn. The sense of power that makes you feel the strength is similar to that of a separate amplifier. The exterior is good without any major noticeable scratches (Oikawa Tetsuji)
Maintenance information: 2024.5.3 maintained (panel dismantling and replacement, meter, illumination lamp replacement, in-board C deterioration replacement, RCA cleaning, SW, VOL cleaning, operation check, backup power supply transformer pattern, relay pattern solder crack correction)
Accessories: remote control, copy of instruction manual
Main specifications: 150W+150W (8/4/2Ω) phono input MM dimensions W445 x H179 x D508 mm weight 30 kg
The company's SONICA DAC remote control unit*Please check the manufacturer's website for operating environments, etc. (https://www.oppodigital.jp/discontinued-product/sonica-dac/)(及川 Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
A compact bookshelf speaker equipped with a high-resolution “Terylene Dome Tweeter.” It achieves clear, high-definition treble. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: instruction manual, original box, saran net
Main specifications: playback frequency band 44Hz to 40kHz impedance 4Ω W192 x H306 x D259 mm 5.9 kg
Very good product with lots of accessories! Current network receiver amplifier compatible with high-resolution sound sources such as network DSD playback. It is compatible with streaming services using HEOS technology recommended by D&M, voice control with Amazon Alexa, etc., and is perfect for ease of use. It is also equipped with a CD player, and a wide FM/AM tuner can also be received. Serial BGX27230273546 (Murakoshi Yoichi)
Maintenance information: 2024.5.3 sound output confirmed
Accessories: remote control, instruction manual, power cord, antenna, original box
Main specifications: rated output 50W+50W (6Ω) DSD (2.8/5.6MHz) FLAC/WAV/Apple Lossless (192kHz/24bit) 2.4/5GHz dual-band Wi-Fi equipped voice input terminal analog x 1, optical digital x 2 USB-A x 1 W280 x H111 x D303 mm 3.4 kg
Roadie's representative 2-way speaker system. A luxurious magnetic circuit was added, and a machined aluminum horn tweeter of unusual quality for this size was used. Along with its elegant look, you can easily enjoy the thick domestic vintage sound. There are small scratches, stains, and warps on the top surface and side angles (Murakoshi Yoichi)
Maintenance information: 2024.2.17 sound output confirmed
Accessories: saran net
Main specifications: 2 way, 2 speakers, dumped bass reflex system, bookshelf type impedance, 8 ohms, output, sound pressure level, 88 dB, dimensions W360 x H610 x D340 mm, weight 22 kg
A type with a built-in transformer for the original SPU MC cartridge that was reprinted in a limited edition of 1000 pieces. The thick, rich texture and sharp high frequency set it apart from other cartridges. The original box is from the old GTE and has deteriorated drastically. The main body is generally good (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: needle cover, original box (for old GTE, has deteriorated)
Main specifications: MC type transformer built-in elliptical needle output 7 mV playback frequency band 20 to 20,000 Hz needle pressure 3 to 4.5 g dead weight 33.2 g (actual measurement)
A popular SME classic headshell with a stylish design. It's lightweight, which is essential for light needle pressure arms and heavy cartridges, and after all, this is the best fit for SME arms. The exterior has a feeling of use such as dullness (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: aluminum stamping dead weight 8g
※Inexpensive because there are scratches and paint peeling. JBL professional tweeters. Since it is designed to make the sound fly far, the sound quality is solid and more straight compared to the company's consumer model 077. The mid to high frequencies are vivid, and the low frequencies are finished with a tight sound (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: horn type tweeter impedance 16 ohms playback frequency band 6,500 to 21,500 Hz (manufacturer specified), crossover 7 kHz, efficiency 105 dB, W100 x D84 mm, 3 kg/book
A head shell with a round tip that matches the MC Jubilee and Kontrapunkt cartridge shapes. Its own weight is 14.6g, which is a bit heavy (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: machined aluminum block, dead weight 14.6 g
Rare SHURE's highest peak cartridge ULTRA 500! The high resolution that challenges the limits of MM and high compliance without compromising the sharpness typical of SHURE is attractive. The cantilever is slightly to the left (Murakoshi Yoichi)
Maintenance information: 2024.5.2 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.2 mV needle pressure 1.2 g 10 to 35,000 Hz beryllium micro wall cantilever dead weight 10 g
Fidelity-Research 5-head shell keeper You can store it while the cartridge is attached to the shell. It's dull (Oikawa Tetsuji)
Accessories: none
Main specifications: W300 x H45 x D125 mm approx. 540 g
※It has been replaced with a cloth edge. An improved version of the compact and popular blockbuster model CONTROL1. It is a speaker that can be used in a variety of ways, from pure audio to surround sound. There is a crack in the rubber part of the saran net (Oikawa Tetsuji)
Maintenance information: 2024.5.3 operation confirmed
Accessories: none
Main specifications: 2 way 2 speakers bass reflex bookshelf type 4Ω 125W W157 x H233 x D143 mm 1.8 kg
A high-resolution USB-DAC, and a DAC that also functions as a network player. Equipped with ESS Technology's latest generation flagship DAC chip “ES9038PRO.” In addition to PCM sound sources of up to 32 bits/768 kHz, the USB input supports playback of high-resolution sound sources with the highest specifications, such as being compatible with playback of DSD sound sources of up to 22.6 MHz (DSD512) (Tetsuji Oikawa)
Maintenance information: 2024.5.3 operation confirmed
Accessories: remote control, instruction manual, power cable, original box
Main specifications: USB audio input (USB B type) input format stereo PCM stereo DSD (DoP v1.1 or native) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz, 705.6 kHz, 768 kHz PCM quantization bits 16 bits, 24 bits, 32 bit DSD Sampling frequency 2.8224 MHz (DSD64) 5.6448 MHz (DSD128) 11.2896 MHz (DSD256) 22.5792 MHz (DSD512, native only) [coaxial, optical digital input] input format stereo PCM stereo DSD (DoP v1.1) PCM sampling frequency 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz DSD sampling frequency 2.8224 MHz (DSD64 DoP v1.1) compatible audio formats AAC, AIF, AIFF, APE, FLAC, M4A, M4A (Apple Lossless) ALAC, OGG, WAV, WMA, DSF, DFF maximum sampling frequency PCM192 kHz/24 bit/DSD2.8224 MHz (DSD64) W254 x H76 × D360mm weight 4.7 kg
Set of 4 Caldas jumper plates It is machined copper. There is an abrasion on the lug part (Murakoshi Yoichi)
Accessories: none
Main specifications: length from lug center to lug center: 37mm; lug inner diameter: 6mm
Set of 4 Technica's classic banana plug. Insert the core wire that has been stripped of the cable coating into the hole on the side of the product and tighten the product back in place to fix the cable. Oxidation and dullness can be seen on the exterior due to use over time (Murakoshi Yoichi)
Accessories: none
A set of 4 small mini pottery blocks made by Noritake, famous for its high-grade tableware. Compared to TAOC, etc., the impression is that the sound is gentle. The exterior has stains like tape marks on one side, dullness, and a feeling of use (Murakoshi Yoichi)
Accessories: original box
Main specifications: 80 x 100 x 200 mm
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg
This is an ADK LD/LP rack. It is well-made and can hold over 140 sheets of LP and LD software. There are scuffs and bumps on the exterior. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W800 x H360 x D345 mm weight 14 kg