*Currently sold. MM/MC compatible phono equalizer. The fact that you can also use MC at a reasonable price is a high point. ※There is a note on the original box. The exterior is dull and dirty. Serial 25101696 (Yonejima Satoshi)
Maintenance information: 2024.3.25 Operation confirmed
Accessories: power cord, original box
Main specifications: input impedance MM47Ω/MC100Ω gain mm40dB/MC60dB W106×H44×D140mm 500g
Maintained. This time, it will be sold without a diffraction pad. Wilson's best-selling model excelled in its ability to faithfully convey the sound of the source to the listener. The tremendous sense of speed and the fineness of the sound particles are outstanding, the sound field space is large, and the characteristics of good tone are still very attractive. There are repair marks (Oikawa Tetsuji)
Maintenance Information: 2024.3.26 Maintained (Exterior Cleaning/Touch Repair Diffraction Pad Removal Woofer Maintenance: Edge Replacement, Back Filter Replacement Tweeter Maintenance: Edge Replacement, Magnetic Circuit Gap Cleaning Unit Detached)
Accessories: Spikes, spike receivers ※ WATT height adjustment spikes are only included with No. 4.
Main specifications: 3 way 4 speaker impedance 4 ohms output sound pressure level 92 dB W305 x H1016 x D470 mm 73 kg/book
Model with phono (MC). Vacuum tube and semiconductor hybrid vacuum tube preamp. It is a hybrid amplifier represented by Counterpoint, etc., but OCTAVE products only amplify the music signal, and the sound is extremely supple and lively. It is a preamplifier with a sense of security because safety aspects such as protection circuits are well made. It is in good condition with no conspicuous scratches*The original remote control cannot be used. Please use an alternative remote control (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: instruction manual, remote control (alternative), power cable
Main specifications: ECC802 vacuum tube using the phono (MC) model frequency characteristics 3-300000 Hz input impedance 100 kΩ output impedance 100 kΩ (unbalance) /2 x 100 Ω (balance) output terminal XLR x 1, RCA x 2 input terminal XLR x 1, RCA x 4, power consumption 25 W, weight 9 kg
Comes with original box Genuine fusion coordination. 120W A+D class stereo amplifier Furthermore, it is possible to operate as a 290W mono amplifier with a bridge amplifier. The goal is to achieve a tone unique to vacuum tube amplifiers, and it is designed with a more advanced even-order harmonic circuit. It is in good condition with no conspicuous damage (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: instruction manual, power cable, original box
Main specifications: 120W (stereo), 290W (bridge) input impedance 47kΩ playback frequency band 10Hz-50kHz W235 x H55 x D276mm (including terminals and legs) 4.8 kg
Denon's mid-range model. You can enjoy all genres with good modern response and unobtrusive sound quality. Since it is relatively thin, this model is recommended for those who are concerned about space. Phono is compatible with MM/MC. The exterior has small scratches, dullness, dirt, etc. (Oikawa Tetsuji)
Maintenance information: 2024.3.27 Operation confirmed
Accessories: remote control, power cable,
Main specifications: rated output 70W+70W (8Ω) dimensions W434 x H134 x D410 mm weight 15.5 kg
Digital BNC cable 0.6m Yanagida audio cable with a neutral, unmistakable character. Let me ask how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 1.3 m pair No. 3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
XLR cable 0.6m pair #3 is a Yanagida audio cable with a hot-neutral, unmistakable character. Let me ask you how high the CP is. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An XLR cable 0.6m pair, a Yanagida audio cable with a neutral character. The spread and sound image will improve. The cable is stiff, so be careful when handling it. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0m pair of XLR cable terminals is an inexpensive yet cost-effective cable made by Neutrik. It's a powerful linear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
BNC cable 0.6 m is a 75 ohm digital coaxial cable for professional use that uses Oyaide Electric's “Precision Conductor 102 SSC” (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.0 m BNC to RCA specification high quality eco-friendly material sheath is used for the digital cable, and OFC is used as the conductor. There is dirt on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Exclusive resonance with fine-tuned tuning for the 1.0m Z-DTC01W digital RCA cable
Chip Connect is standard equipment. Highly fresh sound can be obtained by virtual direct connection of contacts. There is dullness on the terminal (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital RCA cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Digital BNC cable 0.7 m A D.U.C.C. conductor made of high-purity copper is used, and oxygen-free copper is used as the braided conductor. Noise due to vibration and bending is suppressed by providing a polyolefin-based conductive layer containing a large amount of carbon on the insulator (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
Maintained. model with digital output. It has much in common with the advanced model 860, and you can enjoy WADIA sound with higher accuracy than before. The wide range and thick sound is attractive. It is a player where you can enjoy the amount of information unique to the heyday of CDs. The exterior has dullness, scratches, etc. Serial 0850701830 (Yonejima Satoshi)
Maintenance information: 2024.3.27 Maintained (loading gear and slider gear replaced due to cracked loading belt, cleaning for sticky tray paint, pick-up relay board connector contact cleaning, lens cleaning, inspection of various operations)
Accessories: remote control, instruction manual, power cord, spike, spike holder
Main specifications: Integrated CD player, 2 digital out systems (coaxial/ST link), 32 times sampling, Motorola 56004 DSP drive mechanism is made by TEAC W431 x H178 x D406 mm 19 kg
This item converts unbalanced input to balanced output. It has a loop through function. The exterior has scratches and paint bald spots (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: instruction manual
Main specifications: 4 unbalanced inputs, 4 balanced outputs, W210 x H44 x D230 mm, 2.3 kg
It is a convenient device that can demagnetize and age the entire system in one unit. D-MODE for demagnetization is completed once in about 65 seconds, and is compatible with almost all speakers, amplifiers, boost transformers, AV amplifiers, headphones, cables, and digital audio devices. The exterior is dull and dirty (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: AC adapter
Main specifications: LH-UWF method W250 x H50 x D170 mm 1.4 kg
※There is no problem with the operation, but since there is no manufacturer, it will be handed over as is. CSE isolation regulator. It is recommended for those who live in the Kanto area and have a 60Hz player or the like. The exterior has some dullness and scratches. Serial 710716 (Tamura Eiji)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main Specifications: Isolation Regulator Input Voltage 90-110V Rated Output Voltage 100V Rated Output Power 30W W214 x H85 x D163 mm 4 kg
Digital RCA cable 1.0m uses pure silver conductors at a reasonable price. Not to mention the sound quality, the high amount of information and accurate reproduction without coloring is possible (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 1.5m silver conductor digital RCA cable is bright, light, and has a clear outline that looks like it's made of silver. On the exterior, there are brown spots (Yonejima Satoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An RCA cable uses 1.0 m pair of silver-plated copper wires to prevent sound quality deterioration due to oxidation of copper wires. A cable compatible with a wide bandwidth. Characters disappear and there is stickiness on the plug (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: case
PC-Triple C is used as the 1.0 m pair conductor of the RCA cable, and RCA rhodium-plated small terminals are used. It clearly expresses even the smallest details with a clear sound (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: original box
RCA cable 1.0 m pair The copper/aluminum/brass hybrid configuration, which is also a characteristic of the company, has a high resolution and is an exciting sound that comes out quickly. There is some discoloration on the sheath (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
2.0m PSE standard power cable with a diameter of 11 mm with an OFC conductor held tightly with a PVC sheath. It is a cable with excellent cost performance, with rhodium plating applied to both the connector and plug. There is dullness and small scratches (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m RCA to BNC specification Belden digital audio cable and video cable. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 0.7 m BNC specification Belden digital cable and video cable for audio. If you use it as a digital cable, you can enjoy clear, high-pressure sound. There is dirt and dullness (Tamura Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Digital coaxial cable 1.5m BNC specification This is a digital cable from the famous Akihabara store square electricity that no longer exists. (TAMURA Eiji)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
An entry-class MC cartridge from the Technica 80s. It is also suitable for getting started with MC cartridges. The cantilever is slightly to the left (Takasaki Atsushi)
Maintenance information: 2024.3.27 sound output confirmed
Accessories: none
Main specifications: MC type 0.5 mV 10 ohm 20 Hz to 40 kHz needle pressure 1.4 g to 2.0 g dead weight 4.2 g
This headshell is machined from hard aluminum to ensure sufficient strength in each part. The simple design is excellent. Dullness, slight scarring (Takasaki Atsushi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: dead weight 14g
This headshell is popular due to its combination with the Technics and SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Main specifications: Die-cast aluminum, dead weight 10.2 g
Comes with a 4g sub weight! This headshell is popular in combination with the SL-1200 series. Made of highly rigid die-cast aluminum, it brings out the characteristics of the cartridge. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: weights
Main specifications: Die-cast aluminum, dead weight 10.2 g (+ 4 g)
D-component video cable uses a 1.3 m RCA-D terminal specification PCCC+Hi-OFC hybrid conductor. If you've been looking for one, go ahead. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance Information: Continuity Unconfirmed
Accessories: none
The 5.0 m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
The 0.7m PCCC+Hi-OFC hybrid conductor of the RGB video cable faithfully reproduces high definition image quality. 100 MHz broadband transmission that enables not only DVD video signal transmission but also HD transmission. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
Sony's RCA. This is a cable connection plug. If you've been looking for one, please take this opportunity. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.27 continuity confirmed
Accessories: none
SPU-A shell conversion plug It is an adapter that allows short pitch A-shell cartridges to be attached to general tone arms. There is an appearance, dullness, and a feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.3.25 continuity confirmed
Accessories: none
Compact belt drive CD player. The D/A converter section is a dual mono configuration equipped with 2 units of the latest Barbrown PCM1792 (192 kHz/24 bit) independently on the left and right. The drive method unique to CEC contributes to the smoothness of the sound. The exterior is dull and dirty. Also, the buttons on the remote control have changed color and the rubber part has deteriorated. (SATO Wataru)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: remote control, power cord, stabilizer
Main specifications: analog output: 1 unbalanced and balanced system, digital output: TOS, 1 coaxial, AES/EBU system each W217.5 x D448 x H111 mm approx. 7.2 kg
A rare line transformer for CDs in stock. It is used by connecting between the CD output terminal and the amplifier input terminal. The digital smell is eliminated, and the sound is supple and taut. It's an excellent product that doesn't lose sound even when the volume is low. *It appears to be “MK2” from the writing on the back. There are small scratches and scratch marks on the exterior (Yonejima Satoshi)
Maintenance information: 2024.3.26 Operation confirmed
Accessories: No accessories
Main specifications: dimensions W150 x H75 x D130 mm, weight approx. 2 kg
The price has been drastically reduced. 2024/3/24 sales price 698,000 yen This is AVALON's early luxury speaker ASCENT MK2. It recreates a vast spatial expression that extends backwards from its unique beautiful formative beauty, which can be said to be the prototype of DIAMOND. The sound field reproduction unique to the company, which can be said to be three-dimensional, is overwhelming even at this time of year. Exterior, the saran net has been replaced with a reddish brown color, and 1 Y lug on the connection cord is missing, but the main body is generally good with dullness and small scratches (Kobayashi Hitoshi)
Maintenance information: 2024.3.23 Operation confirmed
Accessories: network, saran net, connection cord
Main specifications: 3 way 3 speakers 6Ω 90db body size W330 x H1143 x D457 mm 72.6 kg network part W305 x H813 x D305 mm 25 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been drastically reduced. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The price has been drastically reduced. 2024/3/19 sales price 198,000 yen Maintained! The HPD315 is mounted in a well-made self-made box. The sound also has good coaxial cohesion and good localization, and you can listen to classical music as well as vocals in good harmony. The exterior is generally good, although there are repair marks and light scuffs. Serial 510911 511259 (Murakoshi Yoichi)
Maintenance information: 2023.7.17 maintained (exterior cleaning/touch up, internal resonance correction unit maintenance (high frequency magnetic circuit rust removal/gap cleaning/center adjustment) unit detachment contact cleaning frequency characteristic measurement check (~ 42 kHz) performed with good results input/output waveform and balance confirmation sound output check)
Accessories: none
Main specifications: 12inch coaxial 2-way (HPD315) frequency characteristics 20 Hz to 20 000 Hz minimum resonance frequency 20 Hz allowable input 85 W output sound pressure level 92 dB impedance 8 Ω size W563 mm x H642 mm x D350 mm weight 23 kg (actual measurement)
※It is inexpensive because it is in poor condition, such as rust. Set of 4 high-carbon cast iron stands with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has rust spots, dirt, etc. (Tamura Eiji)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
Set of 2 This stand is made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium. The sound image is accurately and tightly reproduced. The exterior has a feeling of use such as being dull or torn in felt (Tomoho Asaine)
Accessories: none
Main specifications: W100×H140×D300mm high carbon cast iron Weight 8kg/book
The price has been drastically reduced. 2024/3/22 sales price 448,000 yen Maintained! The famous micro BL-111 is equipped with AC-3000 Limited, which is rarely in stock! The sound created by combining the unique bulge of the gunmetal turntable with an arm with strong depiction power is accurate, and it is reproduced faithfully to the original sound. Please enjoy the thick analog sound that is the opposite of digital. There are dullness and discoloration on the turntable, and there are dullness and bumps in places on the main unit. S-shaped arm only (Kojima Yosuke)
Maintenance information: 2024.3.22 Maintained (1 logic IC replaced.
Replace deteriorated capacitors and semi-fixed resistors on each board. Rotation switching SW contact cleaning, power supply SW, rotation adjustment VR replacement. Turntable shaft disassembly and cleaning, internal bearing ball replacement. Motor disassembly and cleaning, internal rotor cleaning, assembly after lubrication. Arm disassembly, exterior cleaning, internal bearing replacement. Replace the power cable. After assembling the main unit, rotation speed was adjusted, needle pressure was checked, each speed was checked, sound output was tested, and overall operation was confirmed)
Accessories: BL-111: copy of instruction manual, power cable, turntable puller, AC-3000 Limited: original box, subweights, tools
Main specifications: tone arm/static balance type one-point support, screw cord dump needle pressure range 0 to 3 g 0.25 g step anti-skating device, lateral balancer cartridge, dead weight 3 to 17 g, record player/belt drive type, 33/45 rotation, W532 x H230 x D440 mm, 38 kg
The price has been drastically reduced. 2023.3.18 Sales price 258,000 yen Maintained! It is a beautiful item with a genuine 100V wood cabinet! A control amplifier representing the golden age of Macintosh. Compared to the C28, this model has a wider range and more subtlety. The rich, glossy, and thick tone is alive and well, especially with vintage speakers. There are small scratches on the wood cab, but the main body is beautiful (Oikawa Tetsuji)
Maintenance information: 2024.3.16 maintained (each SW/VOL cleaning, pin jack cleaning, lamp deterioration replacement, bridge diode deterioration replacement, auto onboard capacitor deterioration replacement, direct connector soldering, pattern re-soldering, operation check (not completely removed)
Accessories: copy of instruction manual
Main specifications: frequency characteristics 20 Hz to 20 kHz input terminals PHONO 1 · 2, AUX, TUNER, TAPE 1 · 2 W406 × H138 × D330 mm 8.6 kg
Hamilex audio rack It is a polyurethane resin coating finish with excellent water resistance, weather resistance, and color retention. There are repairs to the top corner of the bottom and others. Please contact us for shipping costs (Murakoshi Yoichi)
Accessories: none
Main specifications: W618 x H1000 x D560 mm 53 kg