Sold 1 bottle 12AU7 compatible sphere smooth plate measurement value 106 (rejection value 56) The printing with the white box has almost disappeared, but it was determined that it was an ECC82 made in Yugoslavia from the structure*The measured value represents the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
You can change the position of the steel rack and shelves with casters. There are many stains, scratches, and stains on the exterior (Takimoto Yutaka)
Accessories: none
Main specifications: W540 x H1355 x D680 mm 49.6 kg (actual measurement)
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing was a reprint. The plate is not a box type, but only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 36 (rejection value 32) with replacement box*The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Sold per bottle 12AX7 compatible sphere smooth plate measurement value 54 (rejection value 32), the printing with the white box has almost disappeared, but it was determined that it was an ECC83 made in Yugoslavia from the structure*The measured value represents the gm value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
※One piece only. Details unknown, this is an ALTEC 604 or ALTEC 1 inch driver diaphragm. It seems to be an inexpensive interchangeable product (Daiki Goto)
Accessories: none
Price cut (2021.2.26 selling price 49,800 yen) Unknown 38cm double woofer enclosure. Front load horn type that mounts the woofer up and down. There is quite a feeling of use such as whole scratches, paint peeling part scattered. (Takasaki Takasaki)
Main specifications: aperture direct system about 355mm, screw diagonal about 420mm W760 × H1125 × D670mm Approx. 88kg
The price has been reduced. 2023/129/7 sales price 5,000 yen. 1 piece only. Phase plug for B&W 800 series. It is probably thought to be machined stainless steel, but details are unknown. How about for those looking for a center speaker such as HTM1 (Murakoshi Yoichi)
Accessories: none
Main specifications: 223g/1 piece
The price has been reduced. 2024/1/12 sales price 2,500 yen Headshell from unknown manufacturer. This is a small hole type screw hole that makes it easy to adjust the overhang. As for the exterior, in addition to dullness, there is a feeling of use where only one lead wire is different (Hiroki Aso)
Maintenance information: 2024.1.12 continuity confirmed
Accessories: none
Main specifications: dead weight 10g
Heavyweight stone base with a thickness of 65 mm and a weight of 63 kg! Mirror finish on the whole surface! It looks good as a base for analog players, power amplifiers, and racks. There is a chip in the corner. ※The trolley is not included. We will estimate the shipping fee separately (Fujisawa Yukishi)
Accessories: none
Main specifications: W650 x H65 x D550 mm, measured 63.1 kg
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 42 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The disposal price has been reduced! (Member discounts are not applicable) 2024/1/13 sales price 2,000 yen unspecified speaker cable 2.9 m+4.8 m pair end round piece - unprocessed square sheathed speaker cable. The exterior is dull and has a feeling of use over time (Hiroki Aso)
Maintenance information: 2024.1.13 continuity confirmed
Accessories: none
Prices have been reduced. 2022/11/25 sales price 100,000 yen The enclosure for TA-4151A has a thickness of 40 mm and a front baffle plate thickness of 36 mm, making it heavyweight and very sturdy. The baffle opening is φ296 mm, the unit fasteners are made of wood, and the locking screws for the baffle plate are missing. The exterior has peeling veneer and stains. (TAKIMOTO Yutaka)
Accessories: None*Baffle plate locking screw missing
Main specifications: W878 x H778 x D680 mm 101 kg (actual measurement)
The price has been reduced. 2023.1.21 Sales price 2,000 yen Plastic cover for 28cm units of unknown manufacturer. Outer frame and inner ring set There are abrasions and a feeling of use (Kanai Hidetsugu)
Accessories: none
Main specifications: maximum dimensions W372 x H28 mm inner diameter 270 mm outer 4 holes diagonal screw pitch 345 mm inner ring diagonal screw pitch 289 mm
※1 piece only (male to male) XLR cable 1.5 m interconnect cable with unknown manufacturer. There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
The disposal price has been reduced. Member discounts are not applicable. 2023/11/23 sales price 9,800 yen. ※1 bottle only. A coaxial 2-way speaker with unknown details, very similar to Pioneer's PAX series. I was able to check the sound output, but I couldn't open the box. It seems that it can also be used as a center speaker, etc. There are many cracks, creases, and scratches (Murakoshi Yoichi)
Maintenance information: 2023.11.17 sound output confirmed
Accessories: none
Main specifications: W385 x H575 x D365 mm 16.2 kg (actual measurement)
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer The terminal is male and cannot be used as a microphone. There are a few indelible writing marks left on the plug (Kanai Hidetsugu)
Maintenance information: 2023.9.18 Conductivity confirmed
Accessories: none
※1 XLR male to phone jack cable 1.5 m interconnect cable with unknown manufacturer There is a feeling of use, and there are a few indelible writing marks left (Kanai Hidetsugu)
Maintenance information: 2023.9.17 Conductivity confirmed
Accessories: none
Set of 3 metal spike bases Details are unknown, but it is an affordable and easy to use type. There is a feeling of use on the exterior such as scratches and dullness (Asaine Tomoho)
Accessories: none
Main specifications: size 35φ×H7mm, weight 32g (actual measurement)
The price has been drastically reduced. 2024/3/1 sales price 12,000 yen. This is a heavy weight that can be used with the Pioneer PL-70L2. If you've been looking for one, why not take this opportunity? There are dull stains all over (Murakoshi Yoichi)
Accessories: none
Key Specifications: Weight 177g
The disposal price has been reduced. Member discounts are not applicable. 2023/12/16 sales price 25,000 yen ※1 bottle only. Bass reflex enclosure imitating JBL's mid-size speaker S-99Athena. The lattice grill, which symbolizes old JBL, is well-made. In addition to being able to see many defects in the exterior and lattice, there is a feeling of use such as dullness, abrasions, small scratches, etc. (Kobayashi Hitoshi)
Accessories: none
Main specifications: woofer aperture diameter 316 mm, screw pitch (diagonal) 338 mm high range aperture diameter 134 mm, screw pitch (diagonal) 160 mm W610 x H450 x D314 mm 16.5 kg
Wood cabinet for TD-124 of unknown manufacturer. It can be equipped with an SME long arm. The exterior has scratches, threads, chips, etc. (Tamura Eiji)
Accessories: no accessories
Main Specifications: W597 ✕ H160 ✕ D445mm Weight 3.9 kg
The large triode print sold in Japan has disappeared, but I think it was made by NEC from the structure. Measured IP value: 45 mA (the best standard IP value for this amplifier is 50 mA) with the original box ※ I checked the sound output with the test amplifier and measured the plate current value, and it has been determined that the operation is good (Kojima Yosuke)
Accessories: original box
The price has been reduced. 2024/1/5 sales price 400 yen. ※1 bottle only. 3 cm unit with unknown details. Since the size and condenser is attached to the plus side, it seems to be a tweeter. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2022.11.15 Operation confirmed
Accessories: none
Main specifications: actual impedance measurement 3 ohms 3 cm
※There is a TELEFUNKEN ECC803S, but from the structure, it was determined that the printing is CV4004, the printing is a reprint. The plate is not a box type, only one side of the rib plate is rib plate sold per bottle ECC83/M8137 equivalent tube measurement value 44 (rejection value 32) with replacement box ※ The measured value represents the GM value measured with the test machine TV-7 (Kojima Yosuke)
Accessories: replacement box
The price has been drastically reduced. 2023/9/11 sales price 600 yen. Set of 4 I think it's Cag's Vale. Details unknown. An insulator made of a hard rubber-like material. How about under an audio rack etc. (Murakoshi Yoichi)
Accessories: none
Main specifications: diameter 70 x H7 mm approx. 31 g