Pair tube 6SN7 compatible ball smoke made in England lot: 1185 MXA/1185 MXA measured value 64/64 (rejected value 50) with white box*Pairs are judged based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube 6SN7GTY compatible ball tea base smoke code: unknown measured value 98/94 (rejected value 50) printing with castle box is erased ※ pair is determined based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: white box
Pair tube Russian lot: 0202/0107 measured value 36/36 (rejected value 25) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6L6WGB compatible ball Russian short base measurement value 42/42 (rejected value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
46cm cone woofer for 4345. A large aperture unit that is compatible with digital recording and is advantageous for deep bass reproduction. The exterior looks like liquid solidified on the back side of the unit (Mizusaki Ryo)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: 46cm cone woofer unit impedance 8Ω efficiency 95dB recommended crossover frequency 800Hz or less
Vienna Acoustics tall boy speakers. The low frequencies are modest, but you can enjoy the supple, transparent sound typical of Vienna acoustics. There are no major noticeable scratches, but there is a part of the foot on one side that looks like it has faded (Oikawa Tetsuji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: spikes
Main specifications: 4Ω 90dB W188 × H878 × D250 mm 19 kg
Maintained! Woofer unit used in A5. It is a 38cm Alnico magnet, and the open sound is truly Altec. As for the exterior, the cork around the frame has deteriorated (Mizusaki Ryo)
Maintenance information: 2024.4.28 Maintained (edge holes repaired with rubber adhesive, edge wood chips removed, center cap removed and dustproof net glued, magnetic circuit slit cleaned, rust prevention, coil bobbin center removal)
Accessories: none
Main specifications: 38cm cone woofer unit impedance 16 ohms output sound pressure level 104 dB 12.4 kg
Maintained! CELLO mono power amplifiers with low distribution volume. It is driven by Class A operation up to an output of 8W, and Class A operation with almost high texture in actual use. The sound is thick, roomy, and has a lot of information, but it is a quality unique to high-end machines that also has a sense of subtlety and sound field. RF Enterprise regular import model. As for the exterior, there are fine scratches on the top plate. Serial 0151/0152 (Fujisawa Yukishi)
Maintenance information: 2023.9.25 Maintained (replace all deteriorated capacitors. (Spec inspection)
Accessories: power cord (non-genuine), Fisher XLR conversion cable
Main specifications: 230W+230W (8Ω) 400W+400W (4Ω) W480 x H185 x D693 mm 35 kg
Maintained in 2019! AC100V specification This is the 5th generation SL-1 vacuum tube control amplifier, which is highly evaluated overseas. The sound potential of vacuum tubes has been maximized by thorough noise countermeasures, such as making the special coating inside the chassis non-magnetic and separating the power supply. A rotary resistor with a silver contact is used for the volume, so there are no omissions. There is a dull feeling of use throughout the exterior. Serial 005014 (Fujisawa Yukishi)
Maintenance information: 2019.2.23 manufacturer maintained (stepped VR control contact cleaning. Repairing the power transformer attachment. (I can't get the balance gap)
Accessories: instruction manual (English), power cord (non-genuine)
Main specifications: 3 line inputs, phono inputs: 2 MM compatible output systems, external dimensions: main unit W483 x H133 x D340 mm power supply W310 x H115 x D175 mm Weight: 34.8 kg (main unit, power supply)
A power amplifier with a sense of speed and sharpness unique to Threshold. The sense of volume in the mid to low range is also sufficient, and it makes you enjoy music with dense sound throughout the entire range. There are small scratches and dullness on the exterior. H8010186 (Fujisawa Yukishi)
Maintenance information: 2013.10.6 Maintained (electrolytic capacitor volume replacement, circuit protector replacement. Replace the rubber foot and replace the input RCA jack. Bias and offset checks, maximum output checks, interior and exterior cleaning)
Accessories: power cord
Main specifications: 100W+100W (8Ω) W480 × H192 × D342 mm 24 kg
Maintained including the creation of a new dust cover! Torrens basic model. You can enjoy rich musical analog sound with the genuine TP90 straight arm. Belt drives, double platter floating suspensions, and the basics of record players that continue to continue in Europe are firmly held in place. The exterior is dull. Serial 21727 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 maintenance (new dust cover created. (Rewinding the lifter lever lock solenoid coil, end detection cam processing correction, end position adjustment, belt replacement, board inspection, rotation check arm operation, voice check)
Accessories: arm adjustment strut, AC adapter
Main specifications: 50Hz/60Hz compatible W440 x H150 x D340 mm weight 11 kg
Caster specification! Popular quadraspires 19mm pole 4 tier rack. In addition to excellent design, the shelf board has sufficient rigidity even though it has a simple structure, and it is subtly curved and cut so that vibration components gather at the four corners. There are small scratches on the exterior (Fujisawa Yukishi)
Accessories: No accessories
Main specifications: 180 mm, 326 mm, 326 mm from the top of the 4-tier rack post, W600 x H1,005 x D475 mm, approx. 14 kg
※The felt is attached upside down. Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. Only 1 out of 4 has butyl rubber attached to the inside. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W100×H200×D300mm 9.2 kg
D/A converter with a dual monaural configuration equipped with 2 “ES9038PRO” units. Using 3 Talema toroidal transformers, you can feel the creator's commitment. More natural sound can be reproduced. On the exterior, there are noticeable line marks on the top plate (Tamura Eiji)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: power cable
Main Specifications: Coaxial/BNC/AES/Optical: PCM44.1k to 192 K/16 to 24 bit, DOP64 I2S Input: RJ45/HDMI PCM44.1K to 768K 24/32 bit DSD64 to DSD1024 DOP64 to 256 W430 x H80 x D335 mm Weight 5.4 kg
KRIPTON line transformer. Use it by placing it between the CD player and the control amplifier. It changes smoothly into expressive power, so it is also suitable for long listening. There are some tape marks on the exterior. Serial 0607119 (Fujisawa Yukishi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: No accessories
Main specifications: frequency characteristics 10 Hz to 100 kHz W135 x H90 x D126 mm, weight 1.2 kg
Built-in digital input board. Digital music signals from digital devices can be input. Equipped with coaxial and optical fiber input terminals. There is a feeling of use such as dullness. Serial G2Y425 (Takasaki Atsushi)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
Main specifications: Sampling frequency 32 kHz to 96 kHz, 24 bit digital input optical, 1 coaxial system, automatic switching between coaxial/optical input, equipped with automatic recognition function for sampling frequency, bit rate, and de-emphasis compatible models C-2000, C-245, CX-260, E-213, E-307, E-308, E-408, E-530, E-550
Amplifier/Speaker Selector It can be used to switch between 3 amplifiers and 2 sets of speakers (or 3 sets of speakers and 2 amplifiers). High quality, which pays attention to the quality of domestic cables, is selling well. There is a slight feeling of use (Takasaki Atsushi)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: 24K gold-plated speaker terminal compatible with both stripped wire and banana plug input 3 (L/R) /output 2 (L/R) or input 2 (L/R) /output 3 (L/R) dimensions H55 x W200 x D175 mm, weight approx. 1.4 kg
Maintained in August 2022! A record jacket-sized masterpiece player that went on sale to commemorate the 10th anniversary of Direct Drive. The cartridge comes with the company's EPS-24CS replacement needle. Not only does it have a compact design and a repeat function, but it also has a mute function for a while after the needle falls, automatically detects the size of the board, and can also be used at an angle or upside down, making it a very convenient gem. Serial DA1629M222 (Takasaki Atsushi)
Maintenance information: 2022.8.30 Maintained (grease up motor bearings, linear tracking drives, tone arms and arm lifters. Replacing deteriorated electrolytic capacitors. The internal lighting was changed to a light bulb color LED. Various SW disassembly contact polishes. Create a driving rubber belt. Phono cable cable creation. Check the turntable rotation speed. Check arm needle pressure. Check the sound output. Simple exterior cleaning, comprehensive operation confirmation inspection.)
Accessories: copy of manual, phono cable, power cable, EPS-24CS
Main specifications: quartz lock direct drive MC head amplifier built-in linear tracking fully automatic player W315 x H88 x D315 mm 6.5 kg
Uses 1.0 m pair of RCA cables PSC+ (Perfect Surface Copper Plus) made of copper. Polyethylene air tube insulators are used. The sound is tight throughout the entire area, and the delicate expression is also amazing (Mizushima Itsuro)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: original box
A record stabilizer that can be used properly with an LP/EP board on the front and back. There is a hole so that the EP adapter fits, so you can use it while attached (Mizushima Itsuro)
Accessories: none
Main specifications: zinc alloy diameter 70×H35mm 710g
The 2.0m OFC 0.18 x 140 conductor is twisted and an aluminum shield is applied to the inner circumference of the 3.5 mm x 2 sheath. Uses natural cotton thread as a countermeasure against static noise (Mizushima Itsuro)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
An outlet plate made of 5mm thick machined aluminum alloy with a beautiful surface treatment unique to ORB. The play structure and physical properties with excellent stability express sound quality that is crystal clear and speedy than ever before (Mizushima Itsuro)
Accessories: bag, screws
Main specifications: UL standard product (cannot be used with JIS standard outlets)
Krypton outlet plate By tightening the 3-layer neo-fade carbon matrix material with a stainless steel frame, it is designed to have ideal damping characteristics without resonance/vibration. You can bring out the merits of high-resolution sound sources, etc. (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: W70.4 x H114.4 x D4.0 mm approx. 50 g
It is an outlet cover with a stainless steel base, a beautiful finish made of carbon and glass fiber damping material, and a vibration suppression effect due to the hybrid structure (Mizushima Itsuro)
Accessories: original box, screws
Main specifications: Dimensions 71 x 116 mm, weight 71 g (actual measurement)
Since it is said that electrode resonance is attenuated and rectified by combining multiple different materials such as phosphor bronze, brass, aerospace-spec aluminum alloy, and natural smoky quartz as materials, it seems that the effect can be realized if you try it by attaching a clean power source to an outlet, etc. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Accessories: original box
Main specifications: diameter 37 mm, cover length 63 mm
A 6cm full range is mounted in an enclosure that reproduces JBL's masterpiece Paragon in a small size. The back road horn and rear leg height can be adjusted, so it's quite elaborate (Murakoshi Yoichi)
Maintenance information: 2024.4.27 sound output confirmed
Accessories: none
Main specifications: 6cm full range, 8Ω, W527 x H160 x D145 mm, 2.4 kg
Speaker cable, 8.5 m pair terminal, banana - QED 40th anniversary model, cylindrical 6-core structure, has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Key Specifications: Comments in progress
※There is a tear in the coating at the base of the terminal, so it's cheap! Speaker cable 5.0 m pair terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
A 5-tier rack made of full-body solid natural wood with beautiful Asahi wood processing. We use 30mm thick solid natural wood for the top plate and bottom plate, and 25mm thick for the shelf board. The generous load capacity of 100 kg for the top plate, 50 kg for the middle shelf, and 150 kg for the bottom plate is unique to ADK, which has a sturdy structure. There is a slight scuff on the top plate. (Yamato Yuki)
Accessories: none
Main specifications: load capacity 100 kg, height adjustable with 3 shelves, 3 upper shelves, 5 lower steps (30mm pitch) dimensions W619 x H861 x D520 mm weight 41 kg
Genuine stand for B&W805 series It enhances the sound quality of the speaker and has an appeal unique to genuine products. The exterior has a feeling of use such as dullness and small scratches (Asaine Tomoho)
Accessories: instruction manual, mounting screw, spike holder (general purpose)
Main specifications: W275 x H600 x D370 mm 8.1 kg
※There is no compatible cartridge, so it has not been checked. Synthetic diamond round needle is a replacement needle that can be used with SHARP (Optonica) record cartridges. If you use it, be sure to use it as a stock. The exterior has a feeling of use such as dullness (Jun Tamai)
Maintenance Information: 2024.4.28 Operation Unchecked
Accessories: none
Main specifications: mm needle pressure 1.5g
Speaker cable 1.0m pair terminal banana QED 40th anniversary model. The 6-core cylindrical structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior has a feeling of use such as dullness (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Set of 4 speaker stands Block type can be installed either vertically or horizontally. It is a very convenient and useful item for installing medium sized speakers, etc. There is a feeling of use on the exterior, such as dullness or peeling of the outer sticker ※ There is content like sand inside (Asaine Tomoho)
Accessories: none
Main specifications: Scythe W110 x H190 x D390 mm weight 6.6 kg (actual measurement)
Speaker cable 1.0m pair terminal banana QED 40th anniversary model cylindrical 6-core structure has a high sound density, and the sound full of strength and dynamism is attractive. The handling is poor, but the excellent cost performance in terms of sound is truly QED! The exterior is dull and has a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
GE Valirella mono cartridge for SP I made a sound at the store, but the sound is so clear and powerful that I can't even imagine from my age. There is dullness over time and a feeling of use (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
For the 5.2+6.2 m pair of untreated conductors for the speaker cable, 4 types of materials with excellent sound, mainly high-purity 6NCU, were selected. The deep low frequencies and dynamic playback sound are attractive. There is friction and dirt on the sheath (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
RCA cable, 1.3 m pair, PCCC-A conductor, this cable is particular about component procurement and precision processing in Japan. Overwhelmingly clear sound quality can be obtained, and cost performance is excellent. There are abrasions on the sheath (Asae Tomoho)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Maintained! The classic model for professional 1" screwdrivers. It is a driver that is installed in many of the company's 43 series, etc., and is easy to balance even when combined with various woofers and tweeters. The exterior has a feeling of use such as dullness, small scratches, and abrasions (Asaine Tomoho)
Maintenance information: 2024.4.28 Maintained (diaphragm installation adjustment
Replace the following parts DCR (no scratches on the 164164/6.3 ohm diaphragm)
DCR (63913/6.4.ohm diaphragm, no scratches))
Accessories: none
Main specifications: 1 inch driver, throat diameter: 25 mm, 16 ohms (measured 10/12 ohms), 118 dB, frequency characteristics, 800 Hz to 20 kHz, crossover frequency: 500 Hz or more, 5.1 kg
Unspecified silver shell. The exterior has dullness, abrasions, etc., and there is a feeling of use (Jun Tamai)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
Main specifications: dead weight 12g (actual measurement)
※The cantilever is slightly leaning to the left, so it is inexpensive. The first stereo cartridge in the Empire lineup. The sound is perfect for the 6th to 70s editions where you can feel the core clearly (Yamato Yuki)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: none
We generously use 3 types of luxurious high-purity materials, starting with the 1.2 m pair of RCA cables, pure silver coated OFC. Designed to go all the way to the tip of the terminal. This is a cable with a high degree of perfection that cannot be enjoyed in this class. There is an appearance, dullness, and a feeling of use (Tomoho Asaine)
Maintenance information: 2024.4.28 continuity confirmed
Accessories: none
*Currently sold, this is DENON's long-selling 390 series 4th generation premain amplifier. Recommended for desktops and those with limited size. A classic model that is small yet thick in the mid-range, and has a steady sound. The exterior has a feeling of use over time, such as yellowing and dullness caused by tar. Serial 3111503497 (Tomonori Asaine)
Maintenance information: 2024.4.28 Operation confirmed
Accessories: instruction manual copy remote control
Main specifications: 50W+50W (8Ω) PHONO (MM) W434 × H121 × D338 mm 7.0 kg