Maintained by the manufacturer! This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. There are multiple scratches on the top plate. The LCD is slightly dark (Sasaki Shota)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test)
Accessories: remote control, copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Manufacture-maintained, including pickups. This is the first 1650 limited model equipped with a balanced output similar to the higher-level model. The double chassis structure makes it sturdy. It is a high-density sound, and the thickness of the mid and low tones that cannot be heard with players in the same price range in recent years is attractive. ※The front cover has been replaced with a magnetic one, but a light impact will cause the magnet to come off and open. There are other minor scratches and dullness appropriate to the model year. The remote control is out of stock (Oikawa Tetsuji)
Maintenance information: 2024.4.29 manufacturer maintained (laser pickup, loading belt replacement. Sound output test.
The lower front door did not open due to a bad latch. That's why we're repairing it. The magnet is attached so that it sticks to the metal. Press lightly when closing. (*This is because parts cannot be obtained)
Accessories: copy of instruction manual
Main specifications: Real 20 bit 4DAC Lambda SLC equipped W470 x H122 x D360 mm 12.5 kg
Comes with original box and straight pipe included! This is a masterpiece long arm with one-point support, static balance, and oil dump system. The light arm movement and the sense of balance between the delicate high range and the power of the mid to low range are excellent (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box, manual, phono cable, straight pipe, subway
Main specifications: static balance type, total length 333 mm, effective length: 237 mm, overhang: 15 mm, needle pressure range: 0 to 3 g (0.25 g steps), compatible cartridge, dead weight: 3 to 17 g
Maintained. A Yamaha stereo power amplifier boasting high driving power with a damping factor of 200. The cool panel design and the impressive meter with an orange light are also attractive. Enjoy the hot sound unique to the heyday of audio. There are small wounds and dullness (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (pre-drive circuit repair. Soldering fixes within each circuit. Bad output relay contact replacement. (Meter lamp power lamp deterioration replacement)
Accessories: none
Main specifications: rated output 120W+120W (8Ω) size W435 x H133 x D380 mm weight 11.8 kg
*Remote control is out of stock. Maintained! It is a control amplifier that supports digital input in addition to analog input. The simple mechanical design is also good. The sound quality is also attractive, with a relaxed, highly transparent sound typical of Yamaha. There are dullness and dents (Oikawa Tetsuji)
Maintenance information: 2024.4.27 Maintained (disassemble switches such as PHONO selectors, polish contacts and apply contact cleaner. The preamp circuit, power supply circuit, and all other circuit board soldering were corrected. Digital input sound output check OK. (I/O pin jack polish)
Accessories: instruction manual
Main specifications: 8 digital inputs PHONO (MM/MC), 18-bit operation, built-in twin D/A converter, W473 x H130 x D400 mm, 12.2 kg
Fidelity-Research step-up transformer A multifunctional boost transformer that can be switched from 3 ohms to 100 ohms, has 3 inputs and PASS, and can also be used as a selector for multiple record players. Each gain is equipped with an independent toroidal transformer. The exterior is dull, and there are small scratches (Oikawa Tetsuji)
Main specifications: boost transformer core format/toroidal core input impedance 3Ω, 10Ω, 30Ω, 100Ω, PASS (switching) load impedance 47 kΩ to 57 kΩ frequency characteristics 20 Hz to 30000 Hz W170 × H60 × D180 mm 1.2 kg
This step-up transformer is ideal for SPUs, etc. It is an MC transformer with excellent thickness and sense of energy, and fully brings out the characteristics of cartridges. (Sasaki Shota)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: original box
Main specifications: input impedance 2 to 6 ohms boost ratio 28 dB load impedance 47 kΩ or more channel separation 80 dB (1 kHz) dimensions W80 x H40 x D128 mm weight 400 g
Speaker cable 5.0 m pair M.C.CS 122 HYBRID is a Vandenhall speaker cable using a parallel multiple stranded wire structure. It is a character that carefully conveys musical expression and gives depth to the expression of European speakers such as Tannoy, as well as domestic speakers. Rubbing on the sheath
There is dirt (Kojima Yosuke)
Accessories: none
A rare Rotel thin phono equalizer. It has a flat, neutral tone with no distractions, and I like how simple it is to use. There are small scratches, dullness, and the electrical outlet has changed (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box
Main specifications: input sensitivity MM: 2.5 mV/47 kΩ MC: 210 mV/100 Ω size W440 × H72 × D195 mm weight 3.1 kg
Luxman high definition speaker selector. It's a long-running model. The discrete design where each ground circuit is switched, and 6N wires are used for internal wiring, etc., and the special configuration typical of the company shines. Speaker terminals are also compatible with banana and Y lug terminals (Oikawa Tetsuji)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: none
Main specifications: 1 input system, 3 SP output systems, W370 x H71 x D164 mm, 3 kg
Tigron's 3-disc tuning spacer suppresses complex resonance that occurs in the installation environment of audio equipment, musical instrument amplifiers, etc., and brings out the original performance of the device. There are footprints and a sense of use (Oikawa Tetsuji)
Accessories: original box
Main specifications: size, diameter: 70 mm, thickness: 3 mm, material: special heat-resistant synthetic rubber, magnesium alloy, load capacity: 30 kg/1 piece
Heavyweight marble board Perfect as a speaker base or as a base for mono power amplifiers. The surface is polished, and the sides and back are not as smooth as the front. On the exterior, you can see a small chip on the back corner (Oikawa Tetsuji)
Accessories: none
Main specifications: Size: W400 x D500 x H50 mm 24.8 kg
Pair tube, made in England, bell type smoke measurement value 78/74 (rejected value 46) with tea box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: tea box
Pair tube, made in England, bell type smoke measurement value 80/78 (rejected value 46) with tea box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Pair tube, 6CA7 compatible ball, made in Russia, measured value 44/44 (rejected value 30) with original box ※The pair is determined based on the gM value measured by the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube 6L6WGB compatible ball Russian short base measurement value 42/42 (rejected value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube smoke made in Canada JAN measured value 86/76 (rejected value 46) with original box*Pairs are judged based on gM values measured by testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube smoke, made in Canada, JAN measured value 88/88 (rejected value 46) with original box ※Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube made in China tube measurement value 58/58 (rejected value 32) with replacement box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: replacement box
Pair tube made in China tube measurement value 56/56 (rejected value 32) with replacement box*Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube direct heat triode made in Russia measured value 72/72 (rejected value 38) *Pairs are determined based on gM values measured by the testing machine TV-7 (Kojima Yosuke)
Accessories: none
Pair tube ambient heat beam tube measurement value 44/42 (rejection value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Pair tube ambient heat beam tube measurement value 40/38 (rejection value 25) with original box*Pairs are determined based on gM values measured with the test machine TV-7 (Kojima Yosuke)
Accessories: original box
Sold 1 bottle EL34 compatible ball, made in Japan, N mark measurement value 50 (rejected value 30) with original box (no inner cushioning material) *Measured values indicate gM values measured with the test machine TV-7 (Kojima Yosuke
Accessories: original box
The power cable uses DIP FORMING oxygen-free copper wire with HSE treatment, which is an advanced burn-in treatment, applied to the 1.8 m conductor. The S/N is extremely high, and the strong sound in the low range is also an extremely attractive, high cost performance model. There is a film defect on part of the sheath (Kojima Yosuke)
Accessories: none
This is the first model in Empire's classic 4000D series. Supported by powerful, sharp mid-low frequencies, the deep and thick sound is perfect for JAZZ (Oikawa Tetsuji)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: none
Main specifications: Mi type output 3 mV needle tip 0.1 mil tracing radius proper needle pressure 1 to 1.75 g load resistance 47 kΩ dead weight 7.3 g
Good level! Caster specification! ADK 4-tier rack. Natural wood and essential aluminum materials are used, and the design is also high. The main body frame and inner plate are prevented from vibrating with special material spacers. (FUJISAWA KOSHI)
Main specifications: 180mm, 180mm, 230mm from the top of the 4-tier rack post, W600 x H775 x D450 mm, approx. 16 kg
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2222-5M2B (Fujisawa Yukishi)
Maintenance information: 2024.4.29 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Beautiful item with original box! DENON's classic MC cartridge. The balance of localization and sound is excellent, and all music genres can be played without difficulty. I can recommend this cartridge to a variety of people, from analog beginners to experts (Fujisawa Yukishi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: MC type output voltage 0.3 mV playback frequency 20 Hz to 45 kHz electrical impedance 40 ohms needle tip 16.5 microns round needle pressure 2.2 to 2.8 g dead weight 8.5 g
Comes with original box! Sumiko's Pearl lets you enjoy high-quality analog sound. Compared to Black Pearl, the bass is tighter, the treble range is wider, and you can feel an improved sense of transparency. The exterior is generally good with no bends (Yonejima Satoshi)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: needle cover, original box
Main specifications: mm type output 3.5 mV frequency characteristics 12 to 30,000 Hz suitable needle pressure 1.5 to 2.0 g dead weight 6.0 g
Comes with original box! It is a model with an integrated shell. It was born as a successor to the MP-11. Although it is an MM type, it is a cartridge that reproduces even detailed expressions. The exterior is good with no noticeable scratches. (FUJISAWA KOSHI)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: instruction manual, original box, needle cover
Main specifications: mm type output voltage 5 mV frequency characteristics 20 Hz to 20 kHz suitable needle pressure 1.5 to 2.0 g dead weight 15.9 g with head shell
Comes with original box! This is an MM cartridge with a headshell. This is an introductory machine where you can easily enjoy GOLDRING sounds. The bright, intense sound is attractive. The exterior is good with no conspicuous scratches (Satoshi Yonejima)
Maintenance information: 2024.4.29 Operation confirmed
Accessories: needle cover, original box
Main specifications: mm type output 5 mV frequency characteristics 20 to 20,000 Hz suitable needle pressure 1.5 to 3.0 g (2.0 g) dead weight 4.2 g
Maintained! Single stereo power amplifier using 2A3 output tubes. You can enjoy the aftertaste of sound and air unique to vacuum tubes. It expresses vocals and string music in a sweet and glamorous manner. This is a well-built car at an affordable price. The appearance is fine, with no noticeable scratches, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.29 maintenance completed (power supply capacitor replacement, RCA jack replacement, cord clamp added to keep unused wire away from heat source, fixed solder defects, vacuum tube pin cleaning, bias check ham balance adjustment, output approx. 4.5 W (current load set to 8 Ω), interior and exterior cleaning)
Accessories: power cable
Main specifications: rated output 3.5W+3.5W vacuum tube 2A3 x 2 6H8C x 2 5U4G x 1 W360 x D210 x H190 mm 16 kg
*Currently sold. There is a gap in the right VOL, which is the current situation. It's an inexpensive yet powerful amplifier. The model, which combines stable operation and abundant power, has a good sense of dynamism in the sound, and it feels like it comes to the fore. The input is equipped with an unbalanced RCA pin and a balanced TRS phone. A feeling of use can be seen on the exterior, marks, dullness, small scratches, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) bridge output 150W (8Ω) W480 × H99 × D260 mm 6.8 kg
*Currently sold. It's an inexpensive yet powerful amplifier. The model, which combines stable operation and abundant power, has a good sense of dynamism in the sound, and it feels like it comes to the fore. The input is equipped with an unbalanced RCA pin and a balanced TRS phone. You can see a feeling of use on the exterior, marks, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: power cable
Main specifications: 45W+45W (8Ω) bridge output 150W (8Ω) W480 × H99 × D260 mm 6.8 kg
Stylish audio-technica cartridges. It's a sharp, nice sound. The color has faded and there is dullness (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: none
Main specifications: VM type needle pressure 1-2 g dead weight 17 g
Pioneer rare cartridges. It uses an aluminum light alloy pipe cantilever, and the impression is that the range is quite wide for its age. The exterior is dull and has a feeling of use (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: mm type output voltage 3.5 mV optimal needle pressure 2.2 g load resistance 30 to 100 kΩ playback frequency band 15 to 25,000 Hz needle tip 0.5 mil joint type diamond dead weight 5.7 g
MM type cartridge developed based on the DL-107. The magnet has a 1-point support structure using a disc-shaped magnet. A special elliptical needle is used at the tip of the needle, and it makes a smooth sound with excellent high frequency characteristics. There is corrosion on the cantilever serial 1820 (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: needle cover
Main specifications: mm type output voltage 3 mV applicable needle pressure 1.5 to 2.1 g (1.8 g suitable) special elliptical needle frequency characteristics: 20 Hz to 50 kHz dead weight approx. 7.5 g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
2M series RED. The good sound and fluttering energy typical of an orthophone are attractive. The degree is generally good (Kanai Hidetsugu)
Maintenance information: 2024.4.25 sound output confirmed
Accessories: needle cover
Main specifications: MM type 5.5 mV 20 to 22,000 Hz 47 ohms suitable needle pressure 1.8 g dead weight 7.2 g
A new-generation cartridge with the perfect setting for cord vinyl and powerful output. Compatible with hard environments such as DJ play, scratches, and vibrations (Kanai Hidetsugu)
Maintenance information: 2024.4.29 sound output confirmed
Accessories: original box, instruction manual (English), needle cover
Main specifications: MM 10mV 20 to 18,000 Hz, proper needle pressure, 4 g dead weight, 18.5 g
※6 month warranty. A PIONEER tall boy speaker with clean sound quality and good balance. It is a model developed for AV use, but it also sounds in a wide range as pure audio regardless of genre. It is a model with high cost performance even as an introductory machine. There are large tape marks on the exterior and back, and a feeling of use such as dullness and bruises can be seen (Kobayashi Hitoshi)
Maintenance information: 2024.4.26 Operation confirmed
Accessories: saran net, jumper (general purpose)
Main specifications: woofer 16 cm cone type x 2 mid tweeter coaxial 13 cm cone type, 3 cm dome type ribbon type super tweeter 6Ω 89dB W274 x H1075 x D366 mm 37 kg
※Unused item. *Set of 3. A gradation cast iron insulator that firmly supports equipment with heavy construction. The excellent damping properties of cast iron and the vibration blocking effect of pinpoint support make the mid to low frequencies clear, and accurate sound images can be obtained (Hiura Katsuji)
Accessories: original box
Main specifications: diameter 60 x height 45 mm weight 800 g/piece plate diameter 35 x height 5 mm weight 40 g/piece
Pioneer perforated headshell Carbon fiber molding The shell is lightweight, has just the right length on the finger, and is easy to use. The exterior has a feeling of use such as dullness (Kanai Hidetsugu)
Maintenance information: 2024.4.28 sound output confirmed
Accessories: none
Main specifications: dead weight 8.7g